Jump to content

hotwire

Race Series Competitors
  • Content Count

    3860
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by hotwire

  1. Jochen & co are quite correct in their info, 55w draws 4.5 amps, 150w draws 12.5 amps. Modern headlights / control systems & wiring simply aren't designed for that extra load. All modern headlights have a high plastic content & will distort with heat, if polycarbonate lamp fronts they will craze Light control systems are designed to operate on a predetermined load. Fuse / wiring connections can melt due to increased load. Believe me I have seen all these things happen. A few years ago zenon bulbs were released to give around 30% increase in light over the same wattage halogen -55w This was to increase light output without altering current consumption so as to protect modern headlights from damage. Certainly high wattage wasn't an issue years ago when tollerances within the systems were higher Be VERY wary Cheers Grant
  2. Hi Andy, The clicking is the relay behind the glovebox that controls the windows from " door open ", as Gus said - dirty contacts in door switches - easy to remove & clean contact area of them or replace if you have others. Cheers Grant
  3. hotwire

    wipers busted

    Hi, Can do the wiper relay for $25 if required. Sorry just seen you have an E36, only have for E30 Cheers Grant
  4. Hi, You don't need a dealer, any mechanic or auto sparky with a scanner that will talk with a BMW (most will) can reset it. Cheers Grant
  5. Hi, Ring Mongoose 0800 805 080 & talk to Amber - Her other 1/2 Blair is a very experienced installer - can't remember what name he trades under off hand but she will inform you with his contact. Cheers Grant
  6. Absolutely unbelievable, would have thought him as invincible, one of the best aussies & great ambassidor for motorsport, will be sorely missed.
  7. Hi Paul, Can do a non air heater box assy - $30 if you wish. 027 6146607 Cheers Grant
  8. Hi, As long as the 525i is an M20 engine then it is the same as the 320 / 325. The 525i could also be an M30 engine in which case it is different - could probably be made to fit but hardly worth the effort. Cheers Grant
  9. Hi, Can't imagine it being cooling system related - did you disturb any wiring (earths etc) when servicing the cooling system? Otherwise I would suspect it being coincidental.
  10. Depends how bad your ones are - shocks are past their best at 40000km's on NZ roads. Your cars original spec shocks when new would certainly out perform Monroe, - leave the Monroe's for the aussie S##t
  11. Hi, If it is a factory fitted BMW unit it won't have a star rating. To my knowledge ( being an authorised NZSA alarm installer) only aftermarket units that are submitted for apraisal are awarded with a star rating -depending on the level of criteria they meet - 1 being least & 5 the highest. I am not aware of any factory fit units having a rating - not saying that they wouldn't meet the criteria of various ratings though For a list of alarms & their ratings, see the NZ security association (NZSA) website Cheers Grant
  12. Don't go for Monroe, from my experience, Beemers as with some other euro cars dont like them, as stated earlier Koni excellent option but also can be costly, I have fitted KYB's to E36's & found them good - good pricing too. George Stocks can do those too. Cheers Grant
  13. Thanks for the info, thought that may be the case, but can you confirm that coding plug you mention as fitted in the front bottom right of the dash (below the idiot lights & sitting behind the lower part of the fascia trim? This dash has the plug you describe fitted there rather than in the back of the cluster. Cheers Grant
  14. E30 320i 5 speeds came factory fitted with 3.45 ratio diffs, i have dismantled 3 & they have all had the same ratio, 320i auto with 3.64. Cheers Grant
  15. Can anybody confirm as to being able to change tacho calibration between 4 & 6 cylinders & vice versa in the E30 cluster(without mods to or changing tacho) eg some form of switching mechanism? Cheers Grant
  16. Temp gauge sender reads off the engine - usually near the thermostat, to bleed I normally only 3/4 fill the system then run until up to temp - thermostat opens (bleed screw open if there is one) by this time air will have risen to the top & released, then just a matter of filling to correct level. Recheck when cold. N.B. Cant always rely on temp guage to show high with an airlock even if engine overheats - if there is air sitting behind the sender it will not read correctly - just like a temp guage will not read high if the engine has lost all it's coolant - no coolant to measure temp of. Cheers Grant
  17. Hi, I have a complete conversion kit for sale here:- http://www.trademe.co.nz/Browse/Listing.aspx?id=66648754 in case you haven't seen it. - will suit your application if as mentioned already - your engine has the CAS at the front (I would think it has) Cheers PS Confirming gmccormack - I had an 84 525i which had the M30 engine -uses a different box to the M20 (fitted in E30's)
  18. hotwire

    tappet noise

    Hi there, Sure can & should be reset, it is typical for noisy tappets in these engines when they are loose, easy job to reset if you know how - about 1/2 hrs work. Clearences should be 8 or 10 thou - can't remember which offhand. If not sure how - best to get someone who knows. Cheers
  19. Andy, I would take the box out first -unless you can get the car high enough to remove as one unit. You would be able to take the 4 cyl out as a complete unit but not sure on the 6 - I have only ever removed them seperately from the box. Remove bonnet for ease of access, as youvé said remove radiator, air filter box/ AFM, take off alternator to get at & remove power steer pump - if no power steer fitted you can leave alternator on. Disconnect front pipe, you can leave both manifolds & viscous fan on. Obviously disconnect all electrics / cables / fuel lines & lift out -easy if lifting eyes are still fitted to the engine, if not some ingenuity / bracket fabrication required for lifting points. Good luck Grant
  20. Hi Andy, The pipe definitly comes out without steering removal, I have only ever taken it out with vehicle on a hoist with no problem nor having to turn lock so obviously if front wheels are hanging then there is enough clearance. Cheers Grant
  21. Hi all, Anyone wanting a genuine E30 M technic boot spoiler I have one listed here: http://www.trademe.co.nz/Browse/Listing.aspx?id=66003486 2 piece unit in good nick just requires repainting to suit vehicle being fitted to.
  22. Hi There, Check resistance with an ohm meter - should be no more than about 15k ohms for each lead. Hard to check insulation though but look for visable cracking/trackiing particually on plastic ends. If you do need replacements - check pricing with BMW - sometimes they can surprise you - either way. Cheers Grant
  23. Hi There, Does battery light (alternator) come on when you turn the key on? If not -alt is crook. As stated already -crook alt will not stop car being jump started. Also if light only came on as the engine stopped, then that is unlikely the problem -was the battery flat when you tried to restart? Check fuel pump working -listen at the back while someone cranks the engine - should hear a faint hum from the tank. Alternatively disconnect the fuel line supply on the engine & momuntarily crank & check for fuel flow -be careful where you aim the fuel. If none then more technical diagnosis is required. Cheers, Good luck.
  24. Jochen, Robinsons instruments in Auckland can now fix those, I sent my dash to "VDO repair" in the states about 18 months ago as at that time no one in NZ could fix - all just said new dash required. Have since sent to Robinsons for work related dashes & they have been able to fix successfully. Cheers Grant
×
×
  • Create New...