CSET

No doubt it’ll be a bit different now compared to the last time I tracked it !

Finished and picked up this arvo, looks damn good That floor ain’t tearing no more. Swapped on the e9x 18’s for a bit. Next up, try not to break anything for a while.. So far in the last couple of months I have a freshly built diff, driveshaft bits replaced and balanced, whole lot of welding and plating and new reinforcement for the rear. That’s enough for a while methinks.

My one? Nope, getting it made

Cage now coming out of the floor haha

Here's some cracks in the welds where the floor was repaired last time .... And where Ray's up to with plates: Fronts done and reinforced - now to work on the rest. I have videos of the damage & the factory clearance to the rear subframe bolts - it's really bad haha. After this, Ray's building a boot section for the cage to tie the rear strut towers together & ensure this sh*t doesn't happen again.

MTOY developed a few new features ?

Great pics from @Azukamii the other night. Swapped out some of the race stuff for winter.

I'm running a VAC. I have an OEM e46 mount I'm happy to sell.

^^ that's Aidan, he's the man. http://www.ocdetailing.co.nz/aidan-robson.html

? even I didn't know there was a difference, and I have played with these literally yesterday.

Got this car back for a couple of days between repairs & took it to my boy Nick at Autotintz for some work. Nobody's seeing inside this car while it's getting sitting around gathering dust ?

Nah not that I can see. Though it sounded like the bottom of the car was coming to bits when it shat itself. Driveshaft fixed, balanced and back in the car. I'll have it for a little while till it goes up to my cage builder. New windscreen in, front end paint chips touched up & repaired the splitter at the same time. I mixed up some paint for the roof chips too - Ben from GT Refinishers painted the panel in a one-off colour ("BSS01" Ben's Special Sauce) with a tonne of flake in there, looks almost gold in the sun. Best I could do, nowhere near the right code but it's better than a chip.

What's up with this car and knocking noises That'd explain the 'mild vibration'..

Diff finished & back in car now. The Euro Surgeon boys spied some tears in the floor too, it's time for plates. My cage builder (Chubb Racing) is planning to build some extra reinforcement for the shock towers at the rear at the same time. I certainly haven't helped things here by stiffening up the rear so much. Winter projects: Fix tears, build rear section to roll cage / subframe supports (underway as above) Make a GTR bonnet (to be fair this is more GT Refinishers than me, but finally get it sorted). I have scored a spare aluminium m3 bonnet & GTR vents that they can chop up and play round with. Get yet another boot, replace wing mounts & uprights with billet items, possibly flush mount to the underside of the boot & strengthen (my current spare boot is warped to hell from the current wing mounts). I wouldn't mind making a 'quick-release' loom for the boot as well so I can swap them over easier. It currently takes me around 30m, most of which is mucking around feeding wiring through holes. Sort out rear diffuser - this has actually been designed & built already (one of the ex-Rocket Lab guys designed & built it for me) but has yet to be finished & installed on the car Remove plastidip from the e39 wheels and fix them properly (this is just laziness on my part) ??? I've had the windscreen replaced while the car has been sitting around, and will be looking at ways to protect the glass further from rock chips when I get my hands on it again - watch for results. Only pic I've got of this car from the past couple of months ?

^^ hi mate, I had my eye on a set for a while but lost the original auction for them. The new owner contacted me when he wanted to sell, and I picked them up.

Getting a little maintenance in the way of a new diff being built by Kayne at KBM 45% 2 way, 3 plate setup - this should make a bit of a difference..!

And just like that it's changed up again. Gumboot Rally in a few weeks, so I've made a few changes. I added clear paint protection film to the headlights as well. Still gotta wire up my CB properly and add the monster aerial - I was talking to someone in Mangere while driving around in Albany a while ago when I tested it haha. Once the rally is over I'll be swapping it back to standard and running the e92 18's for a bit

Last pic on 19's for a while; swapped on the e39 m5 wheels with semi slicks y'day in prep for the next Gumboot Rally.

To be fair, she was on the clock. Time is money!

MTOY levelled up today, it was at Concours! Granted it was on my stand, but it still counts! Generated a bit of interest, should take it out more.

I used to love those..!!! .... If you couldn't tell already ?

Oh right haha yeah the weave is good, and fitment perfect - he does great work! Turnaround times are better these days too (used to take months!).

These side cards are from Geoff Steel in the UK mate

Finally an update. Picked up some new hole drillers and chopped up my carbon fiber rear cards. Measured them up somewhat successfully, installed the rear speakers and fitted up nicely. Installation was quite fun with a cage in the way but I got there, and even better the stereo works. Great success. Untitled by Christian Taylor, on Flickr Untitled by Christian Taylor, on Flickr Untitled by Christian Taylor, on Flickr Untitled by Christian Taylor, on Flickr Untitled by Christian Taylor, on Flickr Untitled by Christian Taylor, on Flickr Pretty happy with interior as it is currently.