Jump to content

Species 8472

Members
  • Content Count

    14
  • Joined

  • Last visited

Everything posted by Species 8472

  1. What kind of oil you bought and where from? I want t do my DCT too one day. Did you noticed a difference afterwards?
  2. Ah, thanks Brent. Is the fuel lines why it is not fitting?
  3. Hi, the valve cover of my misses 325i n53 is cracked. I glued it, but it is still leaking. I want to place an aluminum cover, but they don't exist for a n53. Does anybody know if a valve cover of a n54 will fit? I compared the screws with my n54, those are at the same places, but the high pressure fuel lines have a different number in RealOEM.
  4. Carly is useless for my E36 Z3. It can't reach the modules. For the Z3 I have the Creator C110+ Scanner Engine Diagnostic Airbag ABS Fault Code Scan Tool Fit BMW from ebay for NZ$88. I asked 2 garages for a battery quote with registering. They both said it would cost just under $500. So I decided to buy the Carly app and dongle. The app was US$89.99 (NZ136.74) and the dongle was Euro44.99 (NZD217) The battery, a Century DIN74ZLMF UHP 730CCA 80AH, I got for $271 at Supercheapauto (with a hefty discount). Total NZ486. Similar as the quote, but now I have the app plus dongle and battery. I have registered the battery this morning. To be on the safe side, I hooked up a parallel battery under the hood to keep power on my FRM module. I just don't want to go through the hassle of changing out the FRM module and program it. I will try the carly Ebay app next time if I let my subscription end.
  5. My dongle is also a Carly gen 2 one. Maybe I just pay the app for one year (it is a subscription), because if I have done my battery, I almost have no use for it. I tried to use it on my 2000 Z3, doesn't work at all. And I can't use it for our E91 325i LCI FRM module, because I got the warning from the app that I would brick it. Google for this: "Carly has found severe faults in your FRM and has therefore NOT coded your FRM"
  6. Yeah uhm, I haven't thought about that possibility. So the millage in the DME should be different. Where can I find the VIN on the engine? carjam says it is covered.
  7. We bought this E91 with 109K off TM 3 months ago. It drives great, fast, and comfortable. last week I bought the Carly app and dongle for coding the battery and make the angel eyes DRL. Carly told me that the engine has a different VIN dan it should have. Apparently somewhere in the past the engine has been replaced. I was wondering if it is possible to read out the millage of engine alone with NSCexpert or on an other way? I don't think it has been swapped in NZ.
  8. I filled in a form on the website of the BMW dealer in Hastings and got a phone call from a service representative after a couple of days for a appointment. 2011 sportswagon 325 Japanese import. They only did the drivers side. After that I got 2 invitations for a online survey about the service, which I never fill in btw.
  9. A garage has built in a used auto transmission for me, because I couldn't find a conversion set and I need my car to drive. But when he tested it, the same light came on. When he reads the EGS it comes with the following error: 5 pressure actuator 235 No description and earlier als EGS fault. Do these EGS fail, or can they fail due to a short circuit in the transmission box? I mean, the transmission specialist to whom I brought the box the first time said it was full of swarf and metal parts. I am normally not so suspicious, but I am wondering if I should open the old gearbox if it is truly full of metal parts. Any experience with failed EGS?
  10. Hi, Just from one to the other minute the dasboard light of my gearbox flicked on. I had to drive in limp mode 30km further to home. At home I was able to log in with Inpa, and Inpa told me that there was a problem with the pressure regulator solenoid valve. Normally I fix stuff myself, but at the moment I just don't have the time for it. So I brought the Z to a transmission specialist, and he had a look at it. He opened up the pan and found metal dust and swarf inside. The metal parts had shorted out the solenoid valve, hence the message on Inpa. He told me that that a overhaul would cost at least $4000 plus GST. I had to think that over... The next day my son spoke to our neighbour (BMW fanatic) who was at a local garage that morning asking for a quote for an auto to manual conversion for his E36. The garage said to him that it would cost probably around $3000. That brought me also on the same idea, why not a conversion? The garage said that the conversion of the Z cost probably a bit more. So the latest week I am browsing the net about conversions to manual. The garage who wants to do it for me rather have me sorting out the parts than him. He says that is cheaper to do. I am doubting between an E46 six speed box or an E36 5 speed. If I converse to 6 speed I can keep my LSD 4.44 and have normal rpm. Later I can go to 3.46 and have a nice cruise rpm. If I choose for a normal 5 speed, I have to change my diff to a 3.46 anyway. Any recommendations here? My garage gave me two addresses for parts. He pointed me to HellBM and SDEuropean. HellBM mailed back that they only do inhouse conversions and don't sell conversion sets. I haven't heard form SDEuropean yet (weekend) I saw some traders on tardme selling conversion sets. One trader is offering a set for $1250, which looks reasonable to me. But when I asked for a E46 six speed it is $3k for the gearbox only. What kind of prices are these 6 speed boxes. What can I expect? Are there other (reliable) sources where I can get my parts, prefered conversion sets? Any thoughts about this?
  11. Hi I am placing this for my son. He tried to create an account, but he did't get the confirmation email. Looking for either a manual coupe or auto/manual (preferably manual but not too picky for this) wagon. Anything considered. Price around 5-6k
  12. Hello guys, I'm peter, since 5 years owner of a Z3 2L automatic. When I bought it I rather wanted to have a manual, but I fell for the low K\s (32.000) and it was only for sale 2 k's away. And I like the color, Siena rot. I did some moderated mods, I changed my shocks for the Bilstein B12 kit with Eibach springs and changed all of my bushes for red strongflex bushes. The fitters on my work welded a ireland kit in for me. My rear wheels had about 3.20 degrees camber on them, and I was wearing out tires faster than I could afford them. After the mod, the aligner guy was able to bring it back to 1.9 degrees. I also put angel eyes in in the headlights (and gave misses Species 8472 an heart attack with the lights in the oven). And I detangonized my front blinkers and placed 2 color leds in them. The whites are now my daylight driving lights. I am a Dutchy, and came in 2008 in New Zealand for a better life. Yes I have clogs, no I don't wear them. Yes weed is legal in NL, you are alowed to have 5 plants (sorry, off topic) 2 weeks ago my autotranny crapped out. Only 85k on the counter. I'm an moderate driver, but I had a speed contest between an other car two years ago on the Napier-Taupo road. But I didn't pull it over the red line. Maybe it ruined it, who knows...I hope I can use the expertise for this problem on the forum, but I shall open a separate topic for it.
×
×
  • Create New...