Search the Community
Showing results for tags 'm52b28'.
Found 12 results
-
Hey team, I'm looking for recommendations for an engine builder who can put together a M20B25 2.7ltr stroker, preferably in the North Island. I have the engine all in bits (minus a few of the ancillary bits eg. water pump, fuel rail, etc) as well as all the components to make it 2.7ltr (conrods from a m20b20, crank from a 2.8ltr m52, etc). I have no idea how to competently put it together. Going to use this in my '71 2002.- 12 replies
-
- 2
-
-
- stroker
- engineering
- (and 2 more)
-
Im looking for complete bmw m50b25 or m52b28 engine not fussed on condition. also wanting m50 manifold email: harshiln21@gmail.com
-
Not sure if you’ve seen my endless posts about hunting down a car, which started with an e36 and somehow got diverted to an e30. Finally bit the bullet with what may actually be a bit of a 🍋 in hindsight 😅 (I’ll explain later). A bit about the car first. She started her life in the land of the rising sun in 1988 as a 320i coupe in alpine white and migrated to the land of the long white cloud in 1997. It’s had extensive service history that I can see up until October 2018 when a m52b28 + 5spd (haven’t jacked up yet so don’t know what box) found its way in the engine bay. On viewing and a quick test drive: Pros: - Mechanically sounded and felt well: quick turnover on a cold start, idled well, power felt fine, no knocks or ticking, transmission was smooth. - Wof, reg, and also certed for engine, seats, brakes, suspension - Pretty straight body. Doesn’t look like it’s been in an accident at all. - Central locking with an immobiliser - 2dr and a slick top Cons: - Has the usual e30 imperfections: some rust / corrosion in the common spots (except for the passenger door which may end up being pandora’s box), cracked dash, and paint fade - Wiring’s a bit of a mess in the engine bay and under the driver’s dash - AC deleted - Windows only go up/down if a door is open (some problem with the wiring from the alarm apparently) After some thinking and asking around, I decided to just go for it so I bought it. Picked it up yesterday and that’s where we get to the to the potential lemon part. After a few stops and a bit of time driving around the tron (got some kai, gas, and pumped up tyres), my mate and I noticed a bit of white smoke coming out of the exhaust that kept going (noticed it when I first viewed it 1-2 weeks ago but thought it was just the cold and picked it up late arvo/evening yesterday so initially thought it was also just the cold). By this point we needed to top up the oil as it was sitting low so did that and after a few mins it went away. On the drive back my mate couldn’t tell whether or not smoke was coming out of the engine while driving (I drove the other car) but had his eyes on the temp gauge, which didn’t move. In saying that, we made it back to Auckland with no issues, even with a few moments of ‘spirited’ driving, and had no smoke coming from the engine bay when he was parking it at my place. Another worry is that this morning, I saw that the radiator had been slowly leaking coolant, at least overnight (see video below, have also put pictures of the oil cap, and the coolant reservoir cap) So it looks like the urgent things to do: - New rad (any recommendations?) - Get it to a mechanic to test if the head gasket’s blown I’ll take some photos of the car when I finish getting over the fact that I may have made such a dumb decision 😂. Cheers IMG_1161.MOV
-
I am currently in the process of swapping my m43 to an m50b25. I removed the exhaust from a parts car (1997 328i) and wondering if it is suitable to bolt onto the m50. From what i have gathered, the 2x O2 sensors in the m52 manifold wont work with the m50 (please correct me if im wrong). Will it just be easier to buy an entire m50 exhaust system? Or how do i get around using this exhaust. Cheers
-
Hi all, I can't locate the ews module on my E36 316i compact. Did some cars not have them or something? Mines a 1999 UK import. VIN: WBACS120X0AM36176 I was hoping just to plug and play the module I removed from my donor engine.
-
Hi, Before I grab one I've seen in the UK. Just checking if anyone on BS had a six cyl shifter linkage for sale? Cheers
-
e30 facelift radiator plastic mounts e30 clutch master cylinder res cap e36 m52b28 air flow metre and also m52b28 intake elbow cheers: 021747337
-
some videos if you are bored dealing to a few fast cars
- 4 replies
-
- 3
-
-
- super chrager
- m52b28
- (and 1 more)
-
While I'm patiently waiting on parts to arrive from Pelican Parts I thought I'd tidy up my M52B28 some more before putting it in my E30. I would like to delete as much extra componentry as possible. I have already removed PS pump and AC pump etc. What'd you guys do to the things like purge valve & CCV? Also, any handy tips for stripping down an auto loom to manual? I'm basically left with 4 wires right now that go from trans dme to eng dme that I need to figure out what they're for (tomorrow's job). Thanks in advance for any help! This forum has prevented many headaches!
-
Hey guys, I have just ordered a clutch kit minus the flywheel, as there isn't much life left in my clutch anyway, it have just ordered a standard clutch kit - nothing special, however, I have no idea what the condition of the current flywheel is so I'm wanting to look at flywheel options. Car is: 328i E36 M52B28 I have been told that you can get the flywheel skimmed, but have also been told that because it's a dual mass flywheel you can't get it skimmed... So just wondering what my options are and what you recommend? I don't want to spend a ton of money, however, if the clutch is being done, I might as well get it done right the first time. Also how hard is this as a DIY? - probably a stupid question, but have done 3 manual conversions - so I'm not afraid to get my hands dirty and I'm always up for a challenge when it comes to cars/maintenance/repairs
-
Hey people Im a new member from Christchurch, recently got myself an M52B28 for me E30 so will be looking to source some parts, info and advice as i do this conversion. Here's the beast....
-
Hey people Am looking for sump, oil pickup and dipstick from an M50 E34 525 for my M52B28 conversion. Also after M50B25 inlet manifold.
