540iA -> 540iM + rear subframe bushes

[kiwi535 538]

This is what I run in mine - 3:15 out of a 750

540iS didn't come standard with LSD, you had to tick the box.

i didnt know that lsd was an option i thought it was not compatible with the traction control system

[Creaver 55]

i didnt know that lsd was an option i thought it was not compatible with the traction control system

I would've thought that if you chose the lsd option ASC wouldn't be available?

[BM WORLD 1258]

check with marty , he had a 3.25 lsd made up(for his e34 turbo project) with the 540i driveshaft flange so that one will bolt straight up

[Guest Simon*]

what sorta revs you running ray 6th at 100 ks....

Mine is about 2100 rpm

i didnt know that lsd was an option i thought it was not compatible with the traction control system

I would've thought that if you chose the lsd option ASC wouldn't be available?

Not sure how it would have come from factory, but seeing as ASC is switchable in mine, no drama.

[twisted 45]

My 540iA has an LSD and switchable ASC from factory.

[Creaver 55]

It has arrived...and let's say I am VERY happy about the shipping costs. UNDER half of what I was expecting/worked it out to be!

I am extremely please with what has arrived. Was told it has about 120,000miles (about 192,000km). A master/slave cylinder and release bearing were all included, so now I have samples to help when sourcing replacements.

My friend is going to look into getting my single mass flywheel/clutch kit setup underway tomorrow now that we have the sample dualmass (which can easily be moved by hand and has about 1cm play).

Size comparison:

Some of the parts received (will need to look into sourcing the non-compatible LHD/RHD parts)

Comparison of auto and manual cross members

Unfortunately the shift boot isn't even close to matching

Edited April 12, 2010 by Creaver - STOK3D

[antony 0]

What are the chances a Manual 535i or 525i centre console would work?

Loving the work, exactly what I think I'd do if I owned a 540i.

[Creaver 55]

I believe it's all a direct swap between the e34's.

Just a mission trying to find the correct trim, let alone a manual e34

[BM WORLD 1258]

i might have some manual shift boot and panel bits left over .

i also have sprayed the panal and shift boots black before seams to work ok.

good work on getting the manual kit

what did that freight cost you in the end

cheers brent

Edited April 12, 2010 by Brent HARTGE535i

[Forrest 35]

^ I just spray dyed the ones in my E30....works pretty good.

[BM WORLD 1258]

have this spare grey gearlever boot .

also have this red panel and boot if you want to barrow it to make a pattern of the panel in plywood/timber etc for the leather boot to fit into .

cheers brent

[Creaver 55]

Awesome - cheers Brent, will be in touch if I have no luck.

The biggest issue is the surrounding trim, was quoted about $500 to get new from germany!

[BM WORLD 1258]

Awesome - cheers Brent, will be in touch if I have no luck.

The biggest issue is the surrounding trim, was quoted about $500 to get new from germany!

wow thats a nice price . i can try if you like through my contacts .

where you asking for a wooden one ?? they are expensive .

[Guest Ari Gold]

$500!?!?!

There was an M5 style one with the pockets either side on trademe for $150 or so a few weeks back.

[BM WORLD 1258]

us and euro prices .

for vinyl and wood types

http://bmwfans.info/parts/catalog/E34/Seda...ng_partition-2/

m5 type.

http://bmwfans.info/parts/catalog/E34/Seda...ng_partition-5/

[mr E34 11]

$500!?!?!

There was an M5 style one with the pockets either side on trademe for $150 or so a few weeks back.

My friend & i still have a genuine BMW M5 surround Ian, the same type Ari is talking about NZ$115.It is in black but you could always get it recovered in leather the same colour as your car interior, pix below.

[Creaver 55]

Awesome Boris - PM sent!

Yeah Brent - was after a wooden one.

Boris's surround covered in my Grey leather would be nice though and that is the path I will be looking to follow at this point

Edited April 12, 2010 by Creaver - STOK3D

[mr E34 11]

Awesome Boris - PM sent!

Yeah Brent - was after a wooden one.

Boris's surround covered in my Grey leather would be nice though and that is the path I will be looking to follow at this point

Black M5 console sold, thank you, thats how deals are done, no mucking around.

[Guest Simon*]

Awesome Ian! Things are definitely progressing!!

I see you don't have an ASC switch in the centre console so the M5 one will fit

Here's mine

[Creaver 55]

Your interior looks very tidy Simon. Straight swap you my AWESOME 4spoke steering wheel? We all know more is better (eg. 6 forward gears)

ASC.....who needs that? haha. That was going to be the next problem, finding one without an ASC cutout

[Guest Simon*]

Haha hmmmmm ... nah!

Ask Ray

[mr E34 11]

ASC.....who needs that? haha. That was going to be the next problem, finding one without an ASC cutout

You could cut the cnr of the M5 console on a band saw to suit ASC switch if need be, maybe check it out first before the deal is done?

[Creaver 55]

You could cut the cnr of the M5 console on a band saw to suit ASC switch if need be, maybe check it out first before the deal is done?

The surround im after is the one WITHOUT ASC...which this is, perfect

[Guest Simon*]

Yes and no need for woodgrain insert either as you get the little compartments in the M5 one. I was keen on one until I realised I'd have to cut for the ASC switch

[mr E34 11]

OK all clear now, what would be easier if you just turn up with a bank cheque for the 535is/540is & you don't have to muck around with your beast. :D