Jump to content
Sign in to follow this  
sweetm3

Clearing out Garage mostly 97 M3 OEM Parts, some others

Recommended Posts

BMW 1997 E36 M3 PARTS LIST

most of these parts if not stated as new have approx 120k
All prices are listed but are ONO


Front & Rear suspension approx 120ks shocks, springs, strut mounts front and rear $300
M3 F_R suspension (800x450).jpg


Front rotors skimmed "only good for spares" $100      Rear rotors $50
M3 Rotors (800x450).jpg


Gear box mounts $30
Engine mount 1 $40
Front control/wishbone arm bushes $40
Rear Trailing arm bush 2 ( new) $50
Front strut mount covers $50
M3 Assortment (800x450).jpg


Revshift Aluminum Flex Disc Guibo $50
Revshift Flex Disk Guibo (800x450).jpg

Front brake cooling kit, includes spot light intakes ,ducting (New) S/S backing plates cut for M3 $350
M3 Brake Cooling Kit (800x450).jpg



USA M3

Pair of Aluminium Top hats from RacingBrakes.com New
Pair of front caliper mounting brackets from RacingBrakes.com New $100
US M3 Top hats Brackets (800x450).jpg


E36 Parts

Front wish bone ball (Pair)Joint Meyle HD Part # 31-12-6758510 (New) $70
E36 ball joints (Small).jpg

Turner Motorsports Underdrive Pulley Kit  (missing power steering pulley)    $150

59b8612c109a9_20170913_102128(Medium).thumb.jpg.f71a1df5fac89445eb86a49effed3735.jpg59b86119c25e3_20170913_102205(Medium).thumb.jpg.97c9f2d965cc5e61a391157551d6e0ad.jpg59b86122e1dee_20170913_102216(Medium).thumb.jpg.ff11751880d4864e04f3b6797560bdd1.jpg

 

 

Edited by sweetm3
Parts added
  • Like 1

Share this post


Link to post
Share on other sites

Are the front brake discs "evo" M3 315x28? If so what is the remaining thickness?

Yes mate, 97 M3 Evo

Fronts 26.8 mm

Rear 19 mm

Share this post


Link to post
Share on other sites

Keen on front brake calipers. Have pm'd you

Sent from my SM-G930F using Tapatalk

Share this post


Link to post
Share on other sites

i will take the cam timing tools - will PM.

Share this post


Link to post
Share on other sites

I'll the guibo and sway bars

Sent from my SM-G935F using Tapatalk

Share this post


Link to post
Share on other sites

The top hats and calliper brakets - do they fit on Euro M3 hubs? Also what rotors and calipers are they made for?

Share this post


Link to post
Share on other sites

Thanks for all the interest, hope I have made contact with everyone.

If you haven't heard from me PM or post again

Mark

I have had an inquiry regarding the exhaust rear box. At the moment I would rather sell both together, but if someones interested in the mid section cats.

We can work it out

Share this post


Link to post
Share on other sites

The top hats and calliper brakets - do they fit on Euro M3 hubs? Also what rotors and calipers are they made for?

Jon

Quick answer is no, but just to explain for others

I received these with my BBK from RacingBrake.com

I installed one side and found that the Hat was approx 5mm to deep which meant that the rotor ring and front wishbone ball joint touched.

So my guess is that they may fit the suspension geometry of a E36 328 or similar

As for the

Rotors rings RacingBrake.com D303-01-311 or 381 and/or D304-06-381

Calipers I used were RacingBrake.com RB440, the standard kit comes with RB400 which is smaller

"they state will fit under a standard 17" rim" my RB440 do and I needed a 10mm spacer.

I brought the RB440 so if I went to an 18" rim I could run 355mm rotors

The calipers look like they are based on a AP caliper

If you're thinking of buying these parts you need to visit RacingBrake.com and read the specs

I love my setup and wouldn't hesitate to recommend the company or BBK kits

Edited by sweetm3

Share this post


Link to post
Share on other sites

Thanks Mark, I'm looking at 5-stud for the E30 and was just wondering. The full BBK would probably be overkill on an E30 which = lockups and flat spots.

FWIW I did try to find RacingBrakes.com and got directed to some weird Aussie V8 racing site, but I think I've found it now under RacingBrake.com - no "s"?

Share this post


Link to post
Share on other sites

Bump

Cheers to the buyers so far,

good luck with your projects

  • Like 3

Share this post


Link to post
Share on other sites

Brad

Sorry I dont know, you had better check realoem.

22316799331 part number for my gearbox mounts

Mark

Share this post


Link to post
Share on other sites

Is the guibo the e36 m3 one with LK=96mm/12mm that in theory should fit an m30 e28?

Share this post


Link to post
Share on other sites

Hi Elijah

Hope this helps

Mark

As for the Guibo measurements are

outside diameter 135mm

inside hole diameter 52mm

Bolt holes 12mm

Bolt holes Centre to centre, across 106 and 48mm between

Bush thickness 30mm

Share this post


Link to post
Share on other sites

Calling dibs on the guibo if it works with the 5sp zf? Also check your PM box sweetm3, I'm also interested in the brake bells.

Share this post


Link to post
Share on other sites

Hi Ron

PM me a price if you ready want them :D

Mark

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...