Jump to content
Sign in to follow this  
WANAM5

E46 Key gets stuck in ignition HELP!!

Recommended Posts

HI Guys/Gals

My Trusty little E46 328i  has developed a frustrating issue. "Sometimes" the key gets stuck in the ignition AND "sometimes" its just jammed and won't even turn forward?? Im guessing its the ignition barrel? but then after a few searches on the net i apparently have to get one from BMW? as its specific to my car only?? (sounds expensive) I thought it may be the switch on the auto shifter which disengages the key so it can come out in Park but why would that stop it from turning to the on position? I've jiggled the steering wheel etc and its just potluck if it comes out? and/or turns forward to start the car.

 

Any suggestions please? can i just buy a second hand ignition barrel? 

 

Help!! sucks going anywhere and hoping the key comes out or hoping the damn thing will turn to the on position!!

 

Cheers everyone

Share this post


Link to post
Share on other sites

How worn is the key? You should have a spare, if so - have you tried that?

Otherwise spray some CRC into the barrel & see if that helps. 

Failing that - get it checked by a locksmith

Share this post


Link to post
Share on other sites
20 hours ago, hotwire said:

How worn is the key? You should have a spare, if so - have you tried that?

Otherwise spray some CRC into the barrel & see if that helps. 

Failing that - get it checked by a locksmith

HI Grant no i lost the spare ages ago, Yes ill try some CRC see how that goes. is it as simple as getting another ket cut off the existing one OR do i have to go BMW? etc etc

Share this post


Link to post
Share on other sites

No point in cutting a key off the original - you are simply copying a worn key.

Some specialist Auto Locksmiths can produce the key & code it, otherwise via BMW

You really ought to have a spare - it becomes a pain in the arse when the only coded key is lost. I strike this quite regularly on AA call outs.

Share this post


Link to post
Share on other sites

had the same issue with e36, started with doors then ignition exactly same as yours, a decent locksmith looked at it and managed to copy and recreate with a bit of guesswork a new key from the totally mangled one we had and it fixed everything perfectly. the locks have been fine since

also be vary careful with the ignition, if you try to force the key eventually barrel will spin and then your up for a pin repair in the column which the locksmith can do. get the key done ASAP it will be the key they seem to be made of very soft material

Share this post


Link to post
Share on other sites

Also, I'd hesitate to spray CRC into the ignition barrel, I'd try some powdered graphite first.

Share this post


Link to post
Share on other sites

Thanks everyone jesus gone are the days of just simply getting another key cut huh? Guess ill be ringing around locksmiths who specialise in BMW keys. Sounds expensive....

Share this post


Link to post
Share on other sites
6 minutes ago, WANAM5 said:

Thanks everyone jesus gone are the days of just simply getting another ankey cut huh? Guess ill be ringing around locksmiths who specialise in BMW keys. Sounds expensive....

Yeah, also gone are the days when any thieving muppet could have your car on a saturday night with  an old screwdriver!!

Share this post


Link to post
Share on other sites
4 hours ago, eliongater said:

Also, I'd hesitate to spray CRC into the ignition barrel, I'd try some powdered graphite first.

No problem with a minimal amount of CRC in the lock, I have fixed multiple locks with it. There is also a specific lock lubricant (like CRC) that can be had. Yes I agree with graphite as an option but most people don't have direct access to it & it can be messy.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...