Jump to content
Sign in to follow this  
e46v12

Project twin e34's + X5 4.6is manual swap

Recommended Posts

E34s with new suspension front to rear, would be very neat indeed. They all need it now. 

  • Like 1

Share this post


Link to post
Share on other sites

IMG_3089.thumb.JPG.d60392ba54a0ab996f52eca3bbbecb70.JPG

So the end of a chapter with my 1st e34 as she has been officially sold tonight. Sad to see it go but glad someone else can appreciate her. Advertised  for 1day on trade me and shes been snatch up.

Maybe the new buyer is a member of the group too?

Sorry for all the photo's its more for memories for me :) 

IMG_3091.thumb.JPG.4d633381a035b4993c839141b6adc9b0.JPG

IMG_3083.thumb.JPG.c9304bfe4323d4f59de798d1b072fa69.JPG

IMG_3082.thumb.JPG.2dd3215a99bfd03979a27c74a8b369ce.JPG

IMG_3088.thumb.JPG.ab32c1cd8e5a08229215f270d1718efc.JPG

 

IMG_3072.thumb.JPG.e9cf02696c1ada74586fd86585bf4e23.JPG

IMG_3078.thumb.JPG.a446797077307d7924b15944254c9247.JPG

IMG_3074.thumb.JPG.e1cf502095894395eed3977295c88487.JPG

IMG_3081.thumb.JPG.24089335743ff858bd50578522bfb05f.JPG

IMG_3086.thumb.JPG.a975882dd94be2ed2a06842772696f08.JPG

 

 

 

Edited by e46v12
  • Like 1

Share this post


Link to post
Share on other sites

Was this the one from Auckland?

Share this post


Link to post
Share on other sites

Hey Nathan

No that one was parted out straight away, i took the running gear and sold on the rolling body due to the amount of rust. This is my original build from the very start along with the 540i wagon. 

Hows your wagon coming along?

Share this post


Link to post
Share on other sites

I'm in talks with a few people overseas about a 4.6 engine so hopefully I can land one soon.

Ive been working on the dry sump setup in the meantime

Share this post


Link to post
Share on other sites

Hey Team 

Its been a while but finally getting onto this X5 manual swap with all this time on my hands.

So Im slowly starting to dismantle the motor in order to change all the gaskets, seals and timing guides. Ill order them once the lock down is over. 

But manged to get the manual box up into place to see how i was going to attack the gearbox mount and driveshaft.

But managed to almost solve the driveshaft issue. Reusing the rear half off the x5 then i found an old e34 525i front half that u joint splines matched but the input part was too small and just short maybe 15-20mm in length. So im going get input part off the driveshaft that came with the box with the extra 20mm and get it welded onto the 525i shaft to match the 420g box and Guibo, that will solve that problem.

P1030394.JPG.9fc9cf3853cb172279d988cbc9bfee4a.JPG

P1030396.JPG.8824993fbe5a581a76f4470e46290d2c.JPG

P1030404.JPG.b9a506c29f0bf6f14014e364358452c4.JPG

top shaft off a e39 540i

middle x5

bottom e34 525i

P1030402.JPG.3fc811fe415a4b1a245d7c44aceb1fa8.JPG

P1030403.JPG.6560d3d45d19f77df8377209fabec70b.JPG

P1030401.JPG.3e6ff045a49418291b4e0fe85e27e3e6.JPG

 

 

 

 

 

 

 

Edited by e46v12
  • Like 2

Share this post


Link to post
Share on other sites

Hey Team

hope you all had a nice Anzac day of remembrance.

So keeping busy in lockdown and trying to make the most of this free time.

I had a pre 98 e39 pedal box that i thought the pedals would work as the part numbers match but for some reason it wouldnt work with the x5 Brake bracket. So with some left over bits from a e87 pedal box i manage to make something that will hopefully work. Cutting the x5 brake pedal down with a cardbourd template.

P1030408.JPG.7b0ac7fc5db55e335eee01a98abd41b8.JPG

P1030407.JPG.c6926bd130b243e1bade34e0b20dc13e.JPG

Just a rough test fit to check if the clutch pedal clears the foot rest and luckly it does as the e87 pedal hangs to the left as you can see.

P1030412.JPG.f1bb132de247007142508d8de21dfb43.JPG

Brought another Solid Mount Shifter from BM speed shop ( trying to support local businesses) for an e46 and mounting point work,  Just need to lengthen the e39 selector rod.

P1030409.JPG.401b96832b94f13cc7ec3ad7dbc8cb5d.JPG

P1030405.JPG.e57056a4172f28ce453b8081b38c4aa4.JPG

Pulled the motor out and stripped it to change all the gaskets and timing chain guides but looks like they were already done as they looked brand new.

P1030413.JPG.76e99fca15a84abfb14358f84e54be0c.JPG

P1030420.JPG.cb0972741c2294d0a5b02f3b6e170be0.JPG

P1030425.JPG.cea56baae1763e713672b6467be6f823.JPG

P1030430.JPG.0f11241ff50646162228832d8e39cf48.JPG

P1030431.JPG.e8c4d8db888322b7ad4373e6563c195a.JPG

P1030432.JPG.dc1e88b9a764cd16b1f62d4efcda6abc.JPG

these are the bits of the old timing Guide after removing the upper oil pan.

P1030434.JPG.83f938cad4c3b676fd698ad7a05a883b.JPG

Gave the block and all mating surfaces a good clean too, took the outer c.v joint off the shaft to be reused and repainted the valve cover.

P1030438.JPG.15fdf8ca540bc5e64298ab473620cfec.JPG

P1030444.JPG.5cdb1c2a54f48aa2ace8314991c864d8.JPG

P1030441.JPG.17d9299696a135ecfe65401b76df8004.JPG

P1030426.JPG.758fe3992182c195033f4ffeb6760e27.JPG

P1030427.JPG.362486c18348862c8a87501fac84aa37.JPG

P1030428.JPG.a103323f54e7604b7c7be549bebde73c.JPG

and saw this too that the block had a b44 stamp on it.  BMW must have just reused the 4.4 blocks and bored them out a few mm.

P1030436.JPG.68bd7b91877027b0f691ef2d4c54ac71.JPG

Also thought id give this a try, placed a whole electric e46 fan and shroud inside the x5 one. Plugs are the same so hopfully can get it to work. 

P1030415.JPG.a2a3e0bb1ac3e6bac283949bd3637665.JPG

So now just waiting for all the gaskets to come from FCP euro. 

 

 

Edited by e46v12
  • Like 4

Share this post


Link to post
Share on other sites

Hey Team 

been a while since last post, so while in lockdown i got quite a bit done. 

Managed to change most of  the gasket on the motor that leaked oil, intake and few other little things. 

Motor is back in the car now, i managed to get the wiring sorted to get the car running. 

flywheel and clutch all in but yet to test.

Front half of driveshaft made and perfect fitment. 

Electric fan from e46 works a treat and cools the engine enough.

Got the Pedal box in with new rubber fed line from reservoir and new braided clutch hard line to slave cyclinder. 

Currently have a rebuilt e92 m3 diff  at Kayne Barrie's getting the flanges changed over to suit the x5 drive shafts.

So not much left to do once i get the diff back, will most likely need the rear half of the drive shaft shorten as well, move the whole car to my engineers shop. Get custom gearbox x member, length gear selector rod then ill be able to drive it.

P1030450.JPG.2b644d6ae8d1d2c1d8b8d6bf25c81e62.JPG

P1030451.JPG.c629b3d49eeb7cfa7ee669b2719ed8ba.JPG

P1030452.JPG.9a8daf531bfff73b2b350598d7adc088.JPG

P1030460.JPG.fe030c3144bc36d56d571bf297ec1fe5.JPG

Braided clutch line

P1030445.JPG.ed5ca849ad984a0878c84aa7f84dbb77.JPG

x5 diff on the left and 330i lock diff on the right

P1030453.JPG.83dc900eaf92d9342e1c17c6571bfa5a.JPG

front drive shaft taken out and just the outer cv case left in.

P1030455.JPG.8b9191f777553c765fcf49f1fec92793.JPG

custom steel flywheel reusing the auto ring gear

P1030456.JPG.a8e7d41f8b43e556455eecc2e3dd494c.JPG

e46 M3 centre modified to accept a nissan 250mm puck plate

P1030457.JPG.72bf828b5c44a2158b30c0774eed0aa8.JPG

Nissan pressure plate 3000lbs clamping force

P1030458.JPG.c5cc0d8ad2c8c053feb530dc9cdab99f.JPG

P1030459.JPG.650e67e501801cbb5830e17b74804d1d.JPG

All most done team.

Edited by e46v12
  • Like 4

Share this post


Link to post
Share on other sites

Hey Team long time no post.

Well what can i say, SHE'S ALIVE :)

Finally got the x5 manual swap up and running, its surprisely quick too with the factory 3.91 open diff, was only sitting around 2.3k rpm at 100kmph.

Custom x member and shifter rod extended.

P1030595.JPG.12d7485131bb67ff28782d092d4b3ee6.JPG

P1030593.JPG.8a34efed74eab73867782a6d85413143.JPG

P1030592.JPG.e78e136909895f7e77a41e6f0b0bc642.JPG

So just a few more tweaks, the x member needs to be raised 25mm to line up the driveshaft straighter. REst of exhaust fitted but first get the rear mufflers deleted.

I also sourced this a while ago  while discussing diff options with Kayne Barrie, I saw this on trade me and he said it could work as he had rebuilt it and knew the measurements.

P1030596.JPG.c56f5179823805a32cde02f9e8ddee28.JPG

a e92 m3 LSD Diff with the flanges changed out to match the x5 ones. 

I have mounted it up and almost perfect I just need to find some big washers to go in between the front two mounts

P1030599.JPG.dc238be7f0ed50558e9381f03930a06f.JPG

P1030600.JPG.d98d4bd1a881089cc3b531a63ed6ea8c.JPG

as you can see picture above,

P1030601.JPG.cc996730c4685710d12ef09a4bcf1ecc.JPG

take the drive shaft in to be shorten and it should be home sailing. I did run into some small issues with the car trying to cut out when i was over 50% open throttle at around 4k-5k rpm 

does any one have any ideas of what this could be?  i pressed the dsc button but no change. Also coded out the auto and made it manual so just a bit stumped.

Feel free to chime team.

 

 

  • Like 6

Share this post


Link to post
Share on other sites

Hey Team

Long time no post. its been a while still the last post, almost a year. I can tell you all that the projects are still alive and kicking, I've just been busy toying with other cars, wheeling and dealing and just been a bit lazy with the posting but definitely still wrenching with the bimmers.

So another one offically done and dusted. The X5 4.6is 6 speed is finally wof, rego and certified :)

Had to add a couple more things to make the certifer happy. Fitted the car with some adjustables, did a rear muffle delete (myself) looks a bit horry but was free piping so I cant complain sounds bloody grunty though. I also managed to get the rev issued sorted. Thanks to DUDMD from the States. He did a remote tune to the dme by reflashing it to a e39 540i manual then reinstalling the 4.6is software. Runs a treat now with no rev hang or reving issues. 

P1030675.JPG.1171083dfe412f3f5ffdf1b52308cad2.JPG

P1030753.JPG.f51c410e53908a735bf13d1935a9225f.JPG

P1030685.JPG.56fa0b7dc29394d10f09ab0348662560.JPG

P1030686.JPG.b836c685b28e45a7a0d5d31040c62d0c.JPG

P1030660.JPG.64f0f8d84521857e3870ea53f8e71b28.JPG

P1030661.JPG.c9af25e8d121e8809065f5ba94e028be.JPG

P1030666.JPG.26bf7a99a73fc01075c1c15ab98a4d42.JPG

P1030667.JPG.28c4249c13cc7c4b30f710510739074f.JPG

I had to get the spring seats modified as i felt they had nothing hold them and the spring to the lower arm.

P1030672.JPG.322dacf9a810318adf8ca1ca5298ea45.JPG

P1030719.JPG.e2b2795db33b432e98ae4204c455b3ff.JPG

Had to get the cross member modified to have a 4 point of contact with the chassis. We added two front bits if you can see in the picture.

P1030721.JPG.2e5fcf095138fcba8a3e0084a8f42a61.JPG

P1030722.JPG.5bc1f7fe172e462a852611dd0d4c0414.JPG

Had to make two driveshaft hoops too.

P1030748.JPG.9c11bd0069cc4cc003258ddd3e3ac62e.JPG

So also purchased this new Daily/tow car a 2006 X5 3.0d which i did an egr delete, no swirl flaps (must be because its nz new) and i got a remap done by promo. Car runs and drives awesome now. Also done some preventive jobs, waterpump, thermo, pulleys and belts, oil and gearbox fluid change.

So now just the e34 wagon left to go, I did pick up this writeoff 4.6is a while ago. I'll be using this motor and 6speed to swap into the wagon. I've already got DUDMD to send me a ews delete dme which has had the same stuff reflashed on like the X5 manual car. This will make my job a little easier gettting the car started. Fun times ahead. will keep you all posted.

Thanks Team

P1030733.JPG.57fd1d03ed1683fcb2fb8e9be55dc9f1.JPG

P1030734.JPG.d35fe1afa0316c4b93a65be993a4d578.JPG

 

 

 

Edited by e46v12
  • Like 7

Share this post


Link to post
Share on other sites

Hey everyone, 

So finially I got the chance to grab the e34 out of storage, been a long time coming. Spent the day just taking bits apart, took the exhaust, auto box and diff out. Will start attacking the motor tomorrow, quite tempted to just use the 4.6is motor that ive got already for the e46 project and just chuck it into the e34 as i pretty much have all parts for this project good to go.

P1030790.JPG.e3be8981ec2d0b02bdef9c3a34c61f49.JPG

P1030791.JPG.0f86cf1e708e4fbac19b92c533629134.JPG

P1030792.JPG.8228ffd0b24094159be3a3462f86c432.JPG

P1030794.JPG.acd1640763d28de6860403532352e973.JPG

P1030797.JPG.03247de7735668a8ef8abcb2d3eed226.JPG

P1030798.JPG.8e5597b0a951ba8bdced58ae9d2c98f0.JPG

 More to come tomorrow :) 

  • Like 5

Share this post


Link to post
Share on other sites

My vote is to put the 4.6 into this! 😎

Share this post


Link to post
Share on other sites

@treone

I certainly am :) 

i have two 4.6's with one ive sort of rebuilt and ready to for my e46 and then the black X5 4.6 parts car which ive yet to pull apart and semi rebuild. The only small dilemma is if i want to use the already rebuilt one i need to take the front timing cover off and change the oil pump chain as its the wrong length for front sump oil pump type. But regardless this wagon will definitely be getting a 4.6 in it.

  • Like 1

Share this post


Link to post
Share on other sites

Awesome! And manual as well? Will be watching how this build goes 😁

Share this post


Link to post
Share on other sites

Hey Team

getting along quite nicely with the wagon. Managed to strip the motor and do a  self leveling suspension (sls) delete.

Hoping to start stripping the 4.6is X5 over the weekend too.

P1030800.JPG.f1f3edebf57a23be3ec9a012b9bd9677.JPG

P1030801.JPG.ae391a8b0b87640eb694e8c1f2d05b99.JPG

P1030802.JPG.73424aeca7572b80e60bc5504ceed43b.JPG

P1030803.JPG.ec9dace6862c22c92c9f102b488005a2.JPG

P1030806.JPG.6680983e1ec7500c1656cd35e4dee4a5.JPG

  • Like 1

Share this post


Link to post
Share on other sites

Hey Team

So finally cracked into the X5 4.6is parts car, stripped the motor out and refurbed in the past month. Swapped the oil pump to the front sump type and replaced timing chain guides and various gaskets. Pretty much got the motor 90% ready to go back in, just need to make a custom bracket for the oil filter housing. Also arrived was my wiring harness from Condor speed which im hopping will make my job easier. But most excitingly finally got to mock up my custom exhaust headers that i had made i think a year ago, I cant wait to get this thing in the car and running.

 P1030808.JPG.fd7236d51888de4377f8ff872b65844c.JPG

P1030810.JPG.8e256463917e522c4bd8c6e2775ce39a.JPG

P1030811.JPG.5b21f59961e0d4d581741a9dc102cf1f.JPG

P1030825.JPG.b8f4ad2950915add0753bff5870ac946.JPG

P1030826.JPG.481b6caac6f8da40a6b91b161a6d89dd.JPG

P1030829.JPG.a8ebc4b77731fc529f9c28412cdced0b.JPG

P1030831.JPG.63ed144a21f6b4da6580eaec6b65063f.JPG

P1030832.JPG.e63636b325127e048cdd340495e8f8d3.JPG

P1030839.JPG.08483a68d987a3a0b5dd327497fd73af.JPG

P1030836.JPG.02151151bec6347527be63f16b9755e2.JPG

P1030837.JPG.fc1602aaae7e20c70dfeac0bb61d0090.JPG

P1030837.JPG.fc1602aaae7e20c70dfeac0bb61d0090.JPG

P1030842.JPG.a8eaa605e9512331b2a10083dc85497b.JPG

P1030844.JPG.d61a02e13fbe25fba3882afcde814e40.JPG

P1030841.JPG.765afa742426ac0b8868acc31966e8e5.JPG

P1030850.JPG.e94007bd6b6f67f87bc6caf58d3b0fe0.JPG

Drilled out the passger side starter hole.

P1030833.JPG.eb0a0840774a88b559e5f33070f96089.JPG

Fiited some 18mm frost plugs into the secondary air pump holes.

P1030845.JPG.3c111e6d0b55e8b412ba08d814a75bf1.JPG

P1030846.JPG.f6c181cfef181c90d9447f6c4a8b42ad.JPG

P1030856.JPG.e8e9252e7eb838a02e34625aa793741a.JPG

P1030861.JPG.f712f68c03e7e006149c4f0b7a909d9c.JPG

P1030868.JPG.3fd84677c7c581f1a929e61973e6c500.JPG

P1030870.JPG.2a5213bac7048e0469f0f6cc01921158.JPG

P1030866.JPG.ce397f83914204f884721175df21dd2d.JPG

P1030863.JPG.b6d12a2a0f34e5d59d8e4f8761ea9452.JPG

P1030875.JPG.d7b95d0c1e577a500fe1977f48e635eb.JPG

P1030877.JPG.881406bed04595295fe077c3526c772e.JPG

Getting closer team.

 

 

 

 

Edited by e46v12
  • Like 4

Share this post


Link to post
Share on other sites

Hey Team

So getting a fair bit done to this build.

Cleaned the engine bay,

Fitted a custom braided clutch line,

custom clutch fluid reservoir utilising the old c101 plug holder,

manual pedal swap Lucky enough my setup had a single spring on the clutch pedal. I didnt have to go through the whole dreaded steering column removal.

retro fitted e46 drive by wire pedal,

test fitted motor with trans and custom headers to check for clearances issues,

test fitted RTD shifter from my e46 build which fits perfectly so im going to keep it for this car and shorten the selector rod too.

Started the wiring from Condor speed and it seems qute easy with good instructions. Feeding the wire throught the e-box and through a fan hole.

Little bracket made to hold oil filter housing,

New brake disc and pads to install

Will start on rear and front bushings tomorrow and send the driveshaft to get shorten.

P1030899.JPG.743db3e6c6a2b1aa4189773a31897abd.JPG

P1030908.JPG.6963cb9cf39b7569bace5f6f2a8acdbd.JPG

P1030906.JPG.a010f0ba976ed3244ee477e633178c80.JPG

P1030917.JPG.27afa8e73432adb0a36de659c9eb13d2.JPG

P1030904.JPG.aec656de1034e24d54874944612bd8b0.JPG

P1030916.JPG.18189d6a4476d2566568b2ca4cd1a54a.JPG

P1030918.JPG.7774f30a7ac60743af90c184157bf9c7.JPG

P1030902.JPG.16ee2b993cc91cae7e99a650e553a911.JPG

P1030903.JPG.e7859a230da93dd39236039305178652.JPG

P1030921.JPG.de35ab41b993d440f82bdf9e0607fc36.JPG

P1030912.JPG.28e02af4d11da8ca59d3e2b8cd65cf9d.JPG

P1030933.JPG.4a379f23cd5bfc2582cb4b5c2ad0b6fe.JPG

P1030935.JPG.60a35422fd5aebe7f6ef31c921c234b0.JPG

P1030922.JPG.3e0f1c1e654c301f73c1050049a0abab.JPG

P1030926.JPG.d49e937b9d2886e997c876661723b079.JPG

P1030924.JPG.f5bbd14df081a23923d721bb6a576281.JPG

P1030928.JPG.5f3e42dab63e32420149c66c7a3f4987.JPG

P1030931.JPG.1745c63b2cf9b062c2e211add3f829fa.JPG

P1030919.JPG.279990ecaf169a104bbf67058eb4036f.JPG

P1030897.JPG.c302d93af168624c69707133f80569a5.JPG

P1030932.JPG.a2025b125a76f264abe4940bde706ea8.JPG

Getting so close

 

 

 

 

 

Edited by e46v12
  • Like 4

Share this post


Link to post
Share on other sites

You going to put it on a dyno? Would be interesting to get an idea of how much power its putting down.

Share this post


Link to post
Share on other sites

Hi @Eagle i wasnt going to to be honest. Its completely factory other than the headers on it, it would be nice to know though. Maybe later down the track if i have funds available for it. thanks

  • Like 2

Share this post


Link to post
Share on other sites

So managed to get the bushings and front arms swapped out on Monday. It doesnt  look like much but man it took me all day. I had one of those moments of "what a dumb arse" where the 1st rear sub frame bushing took me about 2.5 hours to do. Once i realised that i needed to leave a gap between the subframe and body of the car in order to allow the new bushing to protude through to the top. Once i clicked on that the 2nd bushing too me 15mins.I also swaped my XYZ coilovers in while i was there. Just the steering rack, tie rod ends and rear coil overs left to put in.

P1030936.JPG.559796882d284bb0f418fd9bd13104f1.JPG

P1030937.JPG.22b48b771bd0eb3c6cd6cf02cb0afec6.JPG

P1030940.JPG.c59256b5d3f4a605b93ee477468cc1e9.JPG

P1030939.JPG.8cf48a0af5da2041445b3e3aac2b6622.JPG

P1030942.JPG.26da1ef62ead8c471236259d477c7f0d.JPG

P1030943.JPG.556dcd502314392f8086f23d8af39f05.JPG

Edited by e46v12
  • Like 1

Share this post


Link to post
Share on other sites

Hey team hope every one is well and ready for the silly season.

So got a few more things done to the wagon. Car is finally up and running now :)  though not without a few little issues. Exhaust leak, rear adjustables rebound need to be wound up to make it stiffer, wheel alignment,  smaller mid muffler to be welded in as current one is a tad low, change rear seal in the gearbox and get some tyres for the Hamman wheels.

 

Painted the exhaust and baked it in the oven.

P1030944.JPG.a9a7c33a810ba3764df88afa9bd9c30f.JPG

P1030945.JPG.4a5221944a1234b603878588c7d748ed.JPG

P1030953.JPG.3b501e5ca698af0c600d324fcffdaa23.JPG

Changed out the factory twin fuel filters and put a single one in with a regulator and ran a vaccum line up to the manifold.

P1030949.JPG.44f938e00ebea87e5c62d106c2ea14e5.JPG

P1030950.JPG.cd45da784aa30401042eb43cc3b260f4.JPG

P1030951.JPG.31320622572512ec1e58cd18af653afe.JPG

Custom clutch and flywheel installed. Exactly the same setup as the manual swapped X5.

P1030954.JPG.605f5258537259c3814c70799f987320.JPG

P1030955.JPG.1828cf440bc92528ffa1d5e912766c1c.JPG

P1030956.JPG.ebf122abb20180e17cf18f76b59a4aa3.JPG

P1030957.JPG.9f1ce04a4ed6b304203256bee8966668.JPG

P1030958.JPG.e695bb2d7d86db8367bece48c7150b2d.JPG

Running my spare LSD 3.15 till my LSD 3.64 gets back from Kayne Barrie getting a rebuild.

P1030965.JPG.d361de42c7663b0969b0e0e3081f9c37.JPG

P1030966.JPG.df3f538cc87fd77283d7c1a601baeb40.JPG

Driveshaft made to length.

P1030984.JPG.ad18272fc734b518288437a7f4949730.JPG

Tack welded the nuts in tunnel so i could bolt down the RTD shifter without needing someone to hold the nuts for me.

P1030969.JPG.f153b2c2f6761cf64c3bfff29cf7ff11.JPG

Brought this ultra racing Strut brace cheap, it was made for a 525i model. I cut the bar off the hinges and flipped it, rewelded it to make it work with the 540i 

P1030964.JPG.ea8a722e289fec071d343dabd2d49d96.JPG

P1030968.JPG.9f1441357e90626c618634c80f423969.JPG

The Factory mid muffler was rusting and had a small hole, so decided to redo the whole exhaust from the new headers back. Redid the o2 sensor bungs too. But after lowering the car found the mid muffler sits too low so will change out for a smaller one.

P1030979.JPG.71bc9db183f7b2f130b307ce7ea3facb.JPG

P1030980.JPG.469087da7339c9c83cfd179951c47954.JPGP1030978.JPG.149427ab336297c0a3cf69209e9991c7.JPG

P1030981.JPG.17ad667d9ef0f86ae2b929abc3b6349f.JPG

P1030985.JPG.838939ed2679e01fcb73673d09250afd.JPG

P1030987.JPG.d19daafc57483aec36d38cecdab5b5e1.JPG

Fitted the new Zimmermann sports brakes and pads in and flushed the brake system with new fluid.

P1030989.JPG.027dc7d4efbc9566ce45583ac3cb416c.JPG

P1030988.JPG.9a85023e89cc125ba5171a70851ef7d8.JPG

Just arrived a couple days ago this M5 rep center console surround.

P1030999.JPG.5f8c2ff1d3f3bf45ba421ff8c8bd71f6.JPG

.Will be running these wheels on the car. 18 x 8.5 fronts 18 x 9.5 rears

P1030977.JPG.28b8e0ae22f0ab56e48883d1f23d0614.JPG

P1030976.JPG.09d940012f6c6e11c01fd3f622f94c9b.JPG

will get a exhaust clip onces its fully running good.

Thanks Team

 

 

 

  • Like 4

Share this post


Link to post
Share on other sites

Hey Team

happy news years to you all.

So managed to redo the exhaust to hang up abit higher under the body. Swapped the rear bumper to a m tech one, will do the front just need to get it repaired. Also scored some recaro SR7 seats currently need to sort the height on the base before i bolt them in and a sound clip of the car 

 

P1040005.JPG.08563007236225ad5393dd97f7f1cb23.JPG

P1040004.JPG.58503b46a9f8eb4dcf77636273322453.JPG

P1040006.JPG.6d02e95a2a3846f974a95653772dbad9.JPG

P1040007.JPG.9950fed4d0ad78d1c093c24637dd2dfb.JPG

P1040009.JPG.169c8b3b5df477ecb1c68e51174db002.JPG

P1040012.JPG.25994c5f81b6f63ce6f8b569ea85bf2a.JPG

P1040013.JPG.ec484671e87380748e41409d9fbfcfa6.JPG

P1040024.JPG.528b4cf04e23080eda3c4e9847e83892.JPG

P1040025.JPG.9a6b59150d70fa2d7f6344662fdfc986.JPG

Thanks Team

  • Like 2

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...