Jump to content

Garett

Sponsors
  • Content Count

    853
  • Joined

  • Last visited

  • Days Won

    5

Posts posted by Garett


  1. So been learning heaps... right now its putting out 520hp at the wheels at 18psi boost and the torque is awesome so going to run like this for a bit then re tune with different cam set up in a years time seen is that is is Christmas and there's presents to buy, right now as it is feels so much faster than my last engine, in forth gear cruizing at 100kph then floor it it spins the tyres which is fine for now... fastest car ive ever driven...

    Early in the new year its going to get a tidy up and made road legal :D

    • Like 5

  2. Cheers guys, 

    been pretty sh*t with the updates and now im getting things back on track, whats happened in the past year since i had the engine dynoed, ive always had an issue with a vibration at 3k that would rattle my teeth, it was pretty bad, i spent countless hours looking over every thing and came to the conclusion it was an imbalance in the engine possibly from incorrect balancing, so i teared down the engine and sent it back to the engine re-conditioners to get checked and they found it was way out, they were real good about it and covered the cost of new bearings rings gaskets etc to rebuild it, i've just finished putting it all back together and is going in to get dyno tuned on Wednesday, the first dyno i had the valves set so there was about .75mm of overlap and the power dropped off at high rpm so ive set them at around 3mm of overlap to see if the power range would move up... 

    Right now the engine has a lumpy idle, im guessing its due to the overlap and a bit of revision but as soon you give it a bit of gas it is super smooth and little to no vibrations at all

    Other things added is a fast response IAT and auxiliary water pump to the turbo and waste-gate coolant lines to make sure the coolant flows in the right direction

    • Like 5

  3. Alright so got the car back from the tuners, told them to tune for low boost first of 12psi, and pretty much what i thought it made the same power 460whp but was a little later in the rev range than what i would have liked, he gave me a big list of things i need to do before upping the psi to above 20psi which from memory is larger radiator, re plumbing the turbo and waste gate cooler lines, moving the charge pipe work away from the exhaust manifold and waste gates to reduce intake temps. All minor stuff and im sure there was some other stuff on the list

    Also just arrived is the other 3 dunlop 265/310/17 racing slicks to complete the set which will be fitted up the the vehicle soon

    The big fancy clutch set up i got slipped on me a little bit with a full boost 3th gear clutch kick while driving so that will need to come out and be replaced, so the set up cost me around $1,400, this set up would be perfect for an N/A car and should still be in very good condition if someone would like to purchase it :)...  I will have to be getting something a bit bigger to handle the power.

     

    On another note our twin super charged m43 engine'd German police car has now got excessive blowby on the rings so swapped out the engine for an M50B25tu engine and fitted a manual gearbox, decided to use this for a drift missile car...

     

     


  4. Thanks mate, I like to think everything happens for a reason.. we love him to bits and wouldn’t change a thing...

    I figured that the most important thing is when the exhaust closes on a Turbo and when the intake opens and everything else will just fall into place. If I didn’t have the specs of the overlap I would have done what you suggested..

    http://www.catcams.com/products/camshafts/datasheet.aspx?ENGINE_id=103&CAMSETUP_id=222

    see where it says valve lift at tdc... I suspect that is the overlap

    So being Turbo I wanted the exhaust to close a little sooner in case there is back pressure issues in the exhaust manifold.. from what I read the intake cam is where the power is moved in the rpm range

    this is all new to me and very interesting let me know if I’m wrong..

     


  5. Yeah we doing alright, no one ever tells you how hard it is and if they do you never believe them, it doesn’t help my boy has cystic fibrosis and the more severe one.. really hit home, looks like there’s a long journey ahead....

    On another note I got a aeromotive fuel regulator and gauge from Paul at NZ Performance and installed it the other day it makes it real easy when the factory fuel reg is seperate from the rail.

    Found out when installing s50 cams with vanos delete you cannot use timing tools as it will be way out and it was, I installed the new carrier and set up the timing, I left the intake cam at .4 and set the exhaust at half the factory lift at tdc to .75 using a dti gauge and the b32 specs from cat cams, after that it ran a lot nicer..

    I couldn’t help myself so I set up the link g4 and done some runs with the data logger and edited a few fuel cells, I would almost say it goes just as hard as my old engine even with a poor tune.

    66578933-D0FF-42EE-BB02-C07BC789F5ED.jpeg

    • Like 3

  6. A little update, still on the hunt for a carrier.....

    In the meantime received the remainder of my throttle body adapters :D thanks to Jethro @ RML engineering..

    Got some stainless rivnuts to secure things around my car instead of the alloy ones which tend to not work to well, and its a nice weekend by the looks of things so might get some more things done!

     

    IMG_1769.JPG

    • Like 4

  7. On 9/5/2017 at 9:06 AM, crunchy said:

    yep cant see a issue to do it, just use what caps you have and they can re tunnel to correct aliment clearances and youll be like new.

    keep all caps in the order they came off if you can if not the engine shop will sort but pretty sure each one will be numbered 

    Ok so found out no one has a line bore machine... Anyone know of someone to talk to??


  8. 2 hours ago, crunchy said:

    yep cant see a issue to do it, just use what caps you have and they can re tunnel to correct aliment clearances and youll be like new.

    keep all caps in the order they came off if you can if not the engine shop will sort but pretty sure each one will be numbered 

    Yeah they are numbered, all lifters are bagged and tagged also

    The head is at the engine re conditioners now hope to have an answer soon on repair


  9. Ok so I frickin should have seen this coming... upon further inspection I found the insert side for the restrictor on the intake side of the b30 carrier... now the b32 carrier has it on the exhaust side. 

    This means on the b32 the oil galleries won't line up unless you put it in backwards and you can't do that because of the way the piece is made with the thread on one side only, which leads me to believe the b32 never had an issue with flooding the head of oil.

    They must had revised the head design, and looking at the two trays side by side you can clearly see there is a lot more drain holes and in turn does not need this restrictor. FML

    So learn from my mistake I feel like an ass, don't believe everything you read online and definitely do not put a restrictor in a s50b32 

     

    So next question is who has a good b32 cam carrier they can sell me??? ?

    IMG_1684.JPG

    IMG_1685.JPG

    IMG_1689.JPG


  10. There's been a bigger delay....... I fitted oil restrictor while there and on the way to dyno it developed a big tick, found A1 and A2 cam caps have melted FML!!! due to no oil to them, I suspect that when the restrictor went in it created a burr that blocked the gallery to them 2.

×
×
  • Create New...