Jump to content

The Bimmer

Members
 View Profile  See their activity

  • Content Count

    35

  • Joined

  • Last visited

Everything posted by The Bimmer

  1. The Bimmer
    Please DM me your Rego or Vin.I will help you verify.Thanks
  2. The Bimmer
    Maybe I can help.Is your NBT Evo is ID4 or ID5?.No signal is cause by VO Lock or Region Lock.Need to patch with FI or other similar software.
  3. The Bimmer
    If you know how to change the FA and coding.I can provide you the FSC Set for NZ specs.Usualy after you changed the FA the Navi is greyed out.You can use the fsc set to patch the headunit and load maps afterwards.
  4. The Bimmer
    If your vehicle have factory option 6NS(Enhanced Bluetooth) or 6NL(Handsfree Telephony).
  5. The Bimmer
    Is your car NBT headunit?Maybe I can help.
  6. The Bimmer
    I have a spare blower motor with new resistor from e90.
  7. The Bimmer
    You need BMW Software-Winkfp or BMW ISTA/P,Icom Interface and Battery Charger.
  8. The Bimmer
    needs to flash the firmware,maybe can solve the problem.
  9. The Bimmer
    maybe you can try delete the VO $609(NAVIGATION Professional) and Add $663(Radio BMW Professional)Replace your CCC to RAD. write new FA in CAS and FRM and recode kombi and RAD.
  10. The Bimmer
    Anyone wrecking in Auckland. Year 2007 or up BMW 120i or 320i.I'm looking for N46T Engine.Thanks
  11. The Bimmer
    if your car have comfort access try disconnect the door handle connection or disconnect from control unit or disconnect any aftermarket fitted accessories.
  12. The Bimmer
    If you are in Auckland I can help you change the VO
  13. The Bimmer
    use ncs expert, remove VO 0640 and try add 0644 in the VO, FA write cas and frm, code CIC.
  14. The Bimmer
    does not requires license key.Need to run the installer. The last version without license key to activate.I'll try to find the link and send to you.I have a copy in my portable drive as well.
  15. The Bimmer
    I'm using 4.32.15
  16. The Bimmer
    I have a good copy.What interface you're using?
  17. The Bimmer
    try to use or add 825 in the VO and re encode.
  18. The Bimmer
    I have spare EGR Valve.
  19. The Bimmer
    you need to add HIP Module in your CCC, Flash your CCC with ECE Firmware and need to remove your GPS cable from your Navigation HDD unit and plug to HIP module and reroute to Roof Aerial. Latest Update for CCC is 2014.For Maps FSC Activation Code I can generate Activation code for CIC, NBT headunits(Motion,Premiun,Next) for NZ new cars only and not retrofitted units and not Japan
  20. The Bimmer
    you need to purchase Application Number 016C2003 for NZ Live 2021 Maps Browser
  21. The Bimmer
    the water is coming from steering cover in front left due to blocked in front drainage,its common in F02 and F10.
  22. The Bimmer
    For bmw/mini E series frm3 repair,I can help you.Plug and Play No Coding Required
  23. The Bimmer
    When I changed the radio frequency. Usually I used the manipulation profile or expert mode in ncs expert. .After write the the CAS and FRM and I just change the job to sg_codieren and change ecu to cic or ccc and ctune. and done. no issues. Dont use the default profile and some cases car needs to complete sleep or need power reset or use tool32 to restart your I drive.
  24. The Bimmer
    Hi, I can help you if you are in Auckland.Thanks
  25. The Bimmer
    I only know in ISTA. under service functions -select power train under Dme go under adjustment functions and you can see dme cas adjustment.and follow test plan
×
×
  • Create New...