Jump to content
Sign in to follow this  
exextatic

Project 332i - E46 M3 Sedan

Recommended Posts

Have had some interest in my '332i' project, so will post up the details here on Bimmersport.

This car started life as a 2003 330i m-sport sedan in black sapphire metallic and is being built into an 'M3 sedan'.

20170226_130051_scaled.thumb.jpg.2061990642683c3e6b50d8f8ec376f31.jpg

While the car existed as a standard 330i, I replaced the seats and door cards with black leather units, and retrofitted an NBT from an F30:

20160123_143234.thumb.jpg.f38e27a2e7edf8463be3f4603cb071bf.jpg

HellBM then removed the M54B30 and replaced it with an S54B32 & 6-speed manual gearbox:

49616198_137307187288051_9065530392712632748_n.jpg.a25f6d0f1cd148e1bd419e70ecdd1abe.jpg

The VANOS was then 'bulletproofed' using the full Beisan kit, uprated cam gear bolts & S62 diaphragm springs, and the valves adjusted:

17075795_588484598010823_6170076745291530240_n.thumb.jpg.daa2c24584bbb5a514256df17e0cff09.jpg

14540616_1618941245072467_3242151965710352384_n.thumb.jpg.06485a1cf4fdfa9793831520b1ca2dee.jpg

I then rebuilt the donor M3 brake calipers; the front caliper pistons weren't in great shape and were replaced:

20180722_153316_scaled.thumb.jpg.4e11d07b207f9f93f8bce30b7d667e78.jpg

Caliper carriers media blasted & painted:

20181205_174659.thumb.jpg.221b0cff677d78f5fc3439f235712048.jpg

20181205_180005.thumb.jpg.8b57fbf206ba8cd70af4f075b5037cf6.jpg

Calipers prepped & painted (Duplicolor gloss black):

20181129_174840.thumb.jpg.999eaf0467c53797fbd52eee896a908e.jpg

Next up was preparing the remaining M3 suspension and driveline components.

New Bilstein PSS10 coilovers:

14482223_1106270879487113_7385610798535540736_n.thumb.jpg.2b5a5137576fc2af01a91dc5d4013eb7.jpg

Donor M3 subframe bushes removed:

20181229_100902.thumb.jpg.6d11ce649bec39a9f31a925d3c4d4f00.jpg

CMP Auto Engineering solid subframe bushes were chosen for this car, even though it's intended for street use.

The reasoning is two-fold; no movement of the subframe against the RACP should help prevent any future cracking, and the bushes are designed to move the subframe closer to the body to account for reinforcement plates & the vehicle being lowered.

20190102_120701.thumb.jpg.b918563c78bf7b3fe5eec70f8d5b9a61.jpg

20190103_114007.thumb.jpg.20e02e0b3c8158eda76e2e5c07e7e096.jpg

The M3 LSD was cleaned, drained and the rear cover replaced:

20181231_135138.thumb.jpg.eba9b88a4ac2a7be62f658e1f90ddb7e.jpg

20181231_135323.thumb.jpg.4a294e92d97cb0a3c0825f68e6b59610.jpg

20181231_135323.thumb.jpg.277f9fe77935c567fa3bfe61146fa94c.jpg

20181231_150445.thumb.jpg.ab1139bb7f1642056f99d115e5fefc57.jpg

And reinstalled back into the subframe:

20190103_114019.thumb.jpg.3cf832dc036b62387d133e586d2995ce.jpg

Trailing arms disassembled, wheel bearings, balljoints replaced & Syncro Design Works monoball RTAB installed:

20190109_103127.thumb.jpg.71483b0480ef2244e269ae1ee50955ae.jpg

20190109_124813.thumb.jpg.da9e345edbc66326f442ae859ba944b4.jpg

20190109_125817.thumb.jpg.eca957f757362663e7938b47c683e538.jpg

20190109_142503.thumb.jpg.ee82878b2467dc3181f81cf88e0e5d13.jpg

Handbrake shoes & new springs installed:

20190110_123941.thumb.jpg.079c47cb1300b3b8f9ae4c32fc925eb2.jpg

For the front, new CSL kingpins and wheel bearings were used:

47691367_2260712194173631_63732187834433485_n.thumb.jpg.8c4c7219e3f1ac5dc85aead6d1498caf.jpg

The old rear suspension & fuel tank were removed from the sedan:

imagejpeg_3.thumb.jpg.337a99c35db716cea279f8a132d2f51a.jpg

And the boot floor removed:

imagejpeg_4.thumb.jpg.17f023ea86120bfbd3d361aecbee9037.jpg

imagejpeg_5.thumb.jpg.2ffd9ad5eed84fb2d8edc92cf4909114.jpg

imagejpeg_6.thumb.jpg.a09154d9574bb19c2ecc433689a2632d.jpg

No turning back now :).

A brand-new E46 M3 floor pan was purchased and the centre panel extracted:

1399409195_imagejpeg_0(1).thumb.jpg.9f8ce55ca65bcd51db9d8a63cb545e4c.jpg

CMP Auto Engineering reinforcement kit installed:

imagejpeg_7.jpg.6dbe93ac6dd167584dedeb2210c7a1cf.jpg

imagejpeg_8.thumb.jpg.f815f8d6730e546230f673c93c13b7e1.jpg

imagejpeg_9.jpg.af8eba28a500e65c78675dc8e90fcb28.jpg

49619347_292158121349416_2630672570220626495_n.thumb.jpg.0bd337be7c7ed983d4aca2e6d8591127.jpg

The decision was made to go the 'full way':

imagejpeg_10.thumb.jpg.33fec314f040b81e95c1edaf8ce141f8.jpg

Donor rear arches extracted & prepared:

imagejpeg_11.jpg.3d8ebf1f9b12d8a7f2622b761813e877.jpg

imagejpeg_12.jpg.2bdc8b25ab3eb0990ef22c29261b9223.jpg

Test-fitting with M3 rear bumper:

imagejpeg_18.thumb.jpg.869b9dd0913b92ecf2b3a9015e9aa3cd.jpg

Tacked on & then welded fully:

imagejpeg_16.jpg.51c6b1f5d1441545d0f4b3736db203ca.jpg

imagejpeg_15.jpg.6b3ca78cfaeea5e85a0d88c4e787c616.jpg

imagejpeg_17.thumb.jpg.f09ffa0c6d0f85d08b97e6c536c7de65.jpg

49907520_148101552847974_2146209842251490465_n.thumb.jpg.a4b66653953c108b5e6631b129f8488f.jpg

View from behind:

50342237_1834981969938563_240212897260701966_n.thumb.jpg.53da99f6fb01222383079e4c6c7015ef.jpg

M3 rear muffler brackets installed (pre-arches):

imagejpeg_14.jpg.be5288d6b6c7bdfcaa65a5bf70a48fa9.jpg

The rear suspension & fuel system were then mostly reinstalled:

20181227_132948.thumb.jpg.b058fa9e3fe7f9efd31aaf954430157b.jpg

47693920_474279576435357_3243040548756067639_n.thumb.jpg.da62632bd026df72a18adc00401e3f17.jpg

ECS Tuning Monoball RSMs & reinforcement plates installed:

20181229_114111.thumb.jpg.070c42537446c8f217cbf5886b7b1212.jpg

And some more parts removed:

20190107_115033.thumb.jpg.c97d132904f249a35d0b3f0c2eeb1424.jpg

A genuine M3 bonnet was then fitted. The guards will be created by joining both sedan and M3 guards:

47694244_353694195231129_1748551610277593696_n.thumb.jpg.7e8308495913c9bfe30e6cd245b12666.jpg

47694636_290454468325836_5678305110765149483_n.thumb.jpg.351290b35e2632de9f86eee999a55196.jpg

And that's it for now - more to come soon :)

Edited by exextatic
  • Like 18

Share this post


Link to post
Share on other sites

Awesome James.

The fun way of doing an M3

The electrical side of it is the most fun too! 

  • Like 1

Share this post


Link to post
Share on other sites
3 hours ago, qube said:

awesome project. a nice 330i to be sacrificed but hey why not!

Sacrificed?? You mean chosen for special blessings! 

  • Like 5

Share this post


Link to post
Share on other sites
On 1/17/2019 at 9:38 AM, qube said:

awesome project. a nice 330i to be sacrificed but hey why not!

 

On 1/17/2019 at 1:22 PM, Michael. said:

Sacrificed?? You mean chosen for special blessings! 

Thanks Michael & Kyu; definitely special blessings rather than a sacrifice.

Only a small update today; have had a review of the welding work with an LVVTA certifier, only minor adjustments required.

The arches are currently being filled and smoothed, and are coming along well:

20190121_182426.thumb.jpg.548f51880442803802b560cc10e66cb9.jpg

20190123_193216.thumb.jpg.939cbfd0681f2803e44bae31bee7e67d.jpg

20190121_182455.thumb.jpg.eb85e7f13aaf4c000f42d371345cd435.jpg

And with the front bumper lightly held in place (not properly attached):

20190121_182353.thumb.jpg.539f6509905adf93f83d51756ca1be6a.jpg

  • Like 3

Share this post


Link to post
Share on other sites
4 hours ago, Michael. said:

What particular welds were they questioning / needing changes made to? 

Some additional welding was required on the inner skin of the rear guards, and the tube sections that are attached to the reinforcement bar / subframe bolts also had to be welded to the top-side skin of the boot floor (seemed fairly aesthetical to me...) - nothing major either way, fortunately.

Share this post


Link to post
Share on other sites

Suspension back in over the long weekend:

20190128_145230.thumb.jpg.c75a861f1ce0ebb936864e6bc2617927.jpg

20190128_145241.thumb.jpg.f9f6056297ac24881f20729778f5f49c.jpg

Also sorted out the wheels for this project - thank you Tom (M3_Power)!

20190129_204719.thumb.jpg.b9eefc0d9802a938c0def3e6ff888367.jpg

The car seeing daylight for the first time in months:

20190203_160916.thumb.jpg.1451628128540e501cddbdab7deec903.jpg

20190203_160923.thumb.jpg.4e4196eed221717e86fba588513f88d3.jpg

20190203_161011.thumb.jpg.2b7f918d0cac2130b9554b9aa7201ade.jpg

Very happy with how it's turning out; a few more jobs to go and then it'll be on to paint.

  • Like 7

Share this post


Link to post
Share on other sites
On 2/4/2019 at 11:21 AM, qube said:

any plans on the rear taillight and boot handle?

Image result for e46 m3 sedan rear

Have been looking into a CSL-style bootlid (Seibon Carbon) and diffuser, but undecided as at yet (have heard mixed reviews re fitment with the CSL-style bootlids).

Anyhow, latest updates:

20190622_105357.png.890a477c60666cb401ba58451695a828.png

20190622_105348.png.579a0854f536ced266d78169e18c19e7.png

20190622_105337.png.d20543a2442fae36555a8c5add59dc00.png

20190622_105330.jpg.6c381848649db078e1882e730f6feab7.jpg

20190622_105415.png.d76d26a5917ee5b86c3426c360ffadee.png

20190622_105423.png.2b04613f01237f08783f22a709a8c6b3.png

I've since fixed the missing lip on the bootlid, left-rear door trim, centre caps and fitted Bimmerworld adjustable rear camber arms.

The earlier-style mirror modules (non-ribbon-cable) have also been retrofitted, and the GM coded accordingly, so the M3 mirrors are fully functional on a car that originally used ribbon-cable mirrors. ?

Edited by exextatic
  • Like 7

Share this post


Link to post
Share on other sites

you need some LED rear tailights :)

wheels look perfect, fitment is 100% too.

Share this post


Link to post
Share on other sites

This looks so tough in 4 door format.

What (if any) plans do you have interior-wise?

Share this post


Link to post
Share on other sites

Holy crap, I missed this thread, it looks epic, I must come back and read it properly.

Nice one. ?

  • Like 1

Share this post


Link to post
Share on other sites
12 hours ago, qube said:

you need some LED rear tailights :)

wheels look perfect, fitment is 100% too.

Thanks Kyu, have definitely been pondering LED tails for it - concerns around quality of the aftermarket offerings are the only thing holding me back on them.

 

10 hours ago, Cale said:

This looks so tough in 4 door format.

What (if any) plans do you have interior-wise?

Currently has the standard m-sport interior (black carpets & headliner, black alu-cube trim, black leather seats) with E92 M3 front seats (custom-built CANBUS module to get them functioning).

Share this post


Link to post
Share on other sites
2 hours ago, exextatic said:

Thanks Kyu, have definitely been pondering LED tails for it - concerns around quality of the aftermarket offerings are the only thing holding me back on them.

 

Currently has the standard m-sport interior (black carpets & headliner, black alu-cube trim, black leather seats) with E92 M3 front seats (custom-built CANBUS module to get them functioning).

have a set if you need , 

IMG_4477.JPG

IMG_4478.JPG

IMG_4479.JPG

IMG_5594.JPG

  • Like 1

Share this post


Link to post
Share on other sites

Saw this in person when I was up there tuning John’s car for big cams! It is lovely and so well executed (makes me want to build one or a wagon ??) but mate you need a better condition steering wheel ???

  • Like 1

Share this post


Link to post
Share on other sites

Hows the ride with the solid bushes?

Share this post


Link to post
Share on other sites
8 hours ago, zero said:

Hows the ride with the solid bushes?

It's definitely firmer than a standard M3, but not uncomfortably so; no excess driveline noise in the cabin or anything of that nature.

I've been meaning to update this thread for a while - recent (well, around a year ago now) additions include a CSL airbox (Karbonius).

image.thumb.png.39de4603daa0ad8a6e2a0432813f6d89.png

image.thumb.png.1c0ec9465d9f14b5be4c87d1fe09b540.png

Some photos after a wash a while back:

image.thumb.png.e6c1f437e3bb128b56afdbd9f7decfae.png

image.thumb.png.43fd7aae6f08303e1a65387eb3334672.png

  • Like 13

Share this post


Link to post
Share on other sites

still looks fantastic.

if you read the plate backwards its kind of like E46MDG :D

Share this post


Link to post
Share on other sites

@exextatic What diff bushes do you have to go with the solid subframe bushes? Going to do mine in a few months, had heard NVH from solid / poly Subframe bushes is minimal and helps limit movement but solid / poly diff bushes will introduce significant NVH...

Need to see this beast again at another meet!

Share this post


Link to post
Share on other sites

Just spotted this thread having not been a member for a long while, very cool and unique car !!

Share this post


Link to post
Share on other sites
On 4/8/2021 at 9:43 AM, qube said:

still looks fantastic.

if you read the plate backwards its kind of like E46MDG :D

Thanks Kyu; maybe I'll come across a better-suited plate one day.

On 4/8/2021 at 3:09 PM, Sammo said:

@exextatic What diff bushes do you have to go with the solid subframe bushes? Going to do mine in a few months, had heard NVH from solid / poly Subframe bushes is minimal and helps limit movement but solid / poly diff bushes will introduce significant NVH...

Need to see this beast again at another meet!

The diff bushes are factory BMW (which means buying the whole rear cover). E46 non-M3 have a slightly different rear bush setup; I'd go with factory rubber personally.

10 hours ago, Cement said:

Just spotted this thread having not been a member for a long while, very cool and unique car !!

Thanks David.

  • Thanks 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...