Recently I replaced my engine and gearbox. The car is a 92 E36 325i Coupe which had the old engine and Jatco gearbox removed. It was replaced with a M50B30 + S6S 420G Getrag six speed manual conversion. The kit I purchased included a dual mass flywheel and standard M3 clutch. I decided to by a NZAD BMW E36 M50 M52 S50 Solid flywheel & Clutch kit to get the lighter flywheel and all new parts. The flexi-line to the slave cylinder is braided. My problem is the clutch doesn't disengage until