gunter

Got my E30 up for sale. I replaced the steering rack as is was groaning with a trademe buy and it failed a WOF on play in the steering rack so I've decided to put it on trademe to see whether it'll sell as I'm getting married soon and don't have the time to swap another rack. The power steering shop quoted me 450-500 to recon the original or BMW do a seal kit for approx $250 Check out the listing http://www.trademe.co.nz/Browse/Listing.aspx?id=544190326 $4000 o.n.o

Hi there, So the rack in my E30 325i was making horrific noises so I sourced another and installed it. Everything went swimmingly until I came to putting the column linkage back on. Its the type with the two universals and the rubber disc in the middle. The new rack came with the same linkage but upon trying to refit it it seems to be short by about 20mm. I measured the length of each linkage old and new and from the top of the spline to the cross member on each rack and they're the same so I'm stumped. Any ideas? Cheers Tim

Sweet thanks for the replies. I'll start with earths and go from there

Hi Guys, I've got a 88' 325i that strangely cuts out on bumps. I'm not entirely sure what causes it but I replace the ECU with a 173 a couple of months ago thinking it'd cure a common ECU fuel problem but apparently that wasn't the problem. Any ideas what it could be? Cheers

Sweet that sounds good. Like you said its intermittent and doesn't usually last long enough to kill the motor but it has a couple of times. I think but I'm not sure that its a fuel issue but I'll keep watching and if I discover what it is I'll post back

I'd say its some kind of spring steel as well but don't quote me on that. Also check the cert website because I read a post on another forum last week where a guy got pink stickered simply for having a larger sway bar in the original mounts so cutting and welding could cause you some problems

Hi there, So my 325i started cutting out a while back and I bought a bosch 173 which from many different forum searches said cured the problem and it did for a while but now its back. I'm not saying its the computer because the 173 seems to have fixed everybody else's problems Any ideas? Cheers Tim

Sorry for the late reply. Thanks for the help I'll get on to it as soon as possible. Unfortunately I tore the muscles in my lower back last night so the Beamer might be chillin for a while

Hi Guys, I went to drive the 325 on Tuesday after it had been sitting since Saturday and the clutch seems to have mysteriously lost 80% of its travel. Originally it started to engage near the top and had quite a long stroke but now I've only got about 2cm of travel right at the bottom. I say it doesn't feel like a fluid leak because the travel it does have is real solid. Could something have seized to cause this. Its been pretty cold and wet lately Cheers Tim

Don't worry amateur mistake. Never trust Greek meathacks

Sweet thats what I was hoping to hear cheers

Hi there, I've only owned the car about 3 weeks and on Saturday and last night it cut out intermittently. From what I've found on the forum it sounds like a smoked capacitor connection in the ECU. I don't understand what is meant by dry solder join but could I just get in there and re-solder the capacitor? Cheers Tim

Sweet thats good to know. Thanks for the help

Hey guys, So I hope I'm not being a complete mug but I was trying to remove the tie rod ball joint from the hub on the weekend and I assumed its a taper fit like my Mini. When I put the taper break on it and wound it up I was expecting it to release. To my surprise the pop wasn't the taper releasing but the solid cast iron taper break snapping both arms. Just want to make sure it is a taper fit and not threaded in or something else Cheers

Hey thanks, yeah it used to live in Greenlane

Yeah it was a long drive down to Christchurch. The wheels say alpina under the cover but badged BMW on top

Hey folks, Just got myself an 88' 325i Coupe, 5 speed manual, lsd, Alpina rims. Somewhat of a longterm goal to own an E30 but I got sidetracked by a Mini and seven years later after first looking at buying one I've got one. Look forward to hearing from you all and racking your brains for any problems I might have although avoidance is the goal Quick pic for interest. Some of you might have seen the car around