Jump to content

chrisvlok

Race Series Competitors
  • Content Count

    115
  • Joined

  • Last visited

Everything posted by chrisvlok

  1. Just had a service on less than 1000km ago. Fantastic car in excellent condition all round. Great to drive and heaps of room handles like a dream. Smooth V8 power and sound. *Heaps of power about 300hp *229,000km *Good economy (Averages 10l/100km in country 12L/100km in town) *Tan leather and wood finish interior. *Electric seats *ROH Alloys *M-Sport Bodykit *Almost full service history (only two missing just weren't written in book) *Towbar *2-way sunroof *NZ New *Sounds great with custom exhaust and extractors Close to a $200,000 car when new and the quality shows. Asking $6500 Here is the link to trademe http://www.trademe.co.nz/Browse/Listing.as...263&ed=true Prefer cash but may swap, you never know so just ask. As A Note: I come to Christchurch often so if you would like to organise viewing with me I could probably bring the car in. ## MAKE AN OFFER ## 03 3179414 Selling "as is where is" , but I am not aware of any issues. *SELLING ON BEHALF*
  2. Is there any 16v heads out there that will fit onto the m10? bmw or not..
  3. Michelin Race Slicks 24/57r13 ex toyota racing series. No flat spots or un even wearing. All have around 2-3mm tread left. $60 each to bs members or $55 each for a set of 4. http://www.trademe.co.nz/Browse/Listing.aspx?id=327803574
  4. Couple E30 and race car bits for sale Full set of e30 4 door seats grey cloth black trim good con want them gone. Back seats are there too. Offers over $200 *A 1984 1.8l m10 engine and manual gearbox offers over $200 *a 89 4 door 318i we used as a parts car. heaps of spares from other cars inside it but pretty much bare rolling shell offers around $500 *Set of 4 18" Advanti Racing Stilletos with Michelin Porsche Cup tires on them All rims are in good condition performance and mechanicaly wise how ever there is alot of paint chipped of the outer rim from people struggling to put tires on. I have been using them on a E30 BMW race car there for stud pattern is 4x100. Unsure of offset but needed 10mm spacers on the front and rear to accomadate the michelin slicks as they sport quite a large side wall (64) Offers over $950 *about 6 fronts and 2 rears michelin porsche cup tires. great for track days etc. fronts are 240-64r18 rears are 270-68r18 $30 per front tire and $50 per rear 027 332 5567
  5. Would look pretty good i can imagine. heres a pic of them on a old e30 my brother had. but of course with lower profile tires. Image deleted and thread locked. You've been asked once already to resize them, and you're being a twit. Westy radio'd and asked me to take care of this because he was too busy washing his orange vest.
  6. Haha not quite andy someone mared out when putting them on. I told them you'd give them some leasons on how to
  7. Oh that changes everything eh? I was thinking photos but didnt know how to change the size of them without having to upload them again. What were you thinking?!? Dont tell me you wear a fluro orange vest while you moderate forums too? Or radio the other moderators?
  8. Sorry no wire cover available except my one which i will sell for $150 as i had trouble finding one too. And flared gaurds would probably help to eliminate any chance but i didnt really notice any rubbing. I can imagine with bigger spacers though this will be more than fine.
  9. looks like this glenn charector had a bad day so deleted MY photos in some sort of revenge plot, nice work buddy you have showen us how big and strong you are. for everyone please pm me if you are interested in any items and want to see a picture
  10. I really wanted to capture all the detail so i thaught i'd make them as big as poss. haha I dont know how to make them smaller with out deleting the attachments first and waiting another 15 mins for them to upload. they went small on my screen shortly after the page was loaded how ever. could be quite key to wait for this ******Wheels come with brand new bolts and socket******* ALSO have a genuine e30 m3 dtm rear muffler. it has been raced (from new last year) and is a bit ruff. has weldable hole aprrox 1cm diam on top of main expansion chamber and is covered in bird sh*t from sitting in the shed. I want at least $100 for it. Am open to trades for all the thing i have for sale maybe some work on my race car and a box of beers in exchange.
  11. Couple E30 and race car bits for sale Full set of e30 4 door seats grey cloth black trim good con want them gone. Back seats are there too. Offers over $200 *A 1984 1.8l m10 engine and manual gearbox offers over $200 *a 89 4 door 318i we used as a parts car. heaps of spares from other cars inside it but pretty much bare rolling shell offers around $500 *Set of 4 18" Advanti Racing Stilletos with Michelin Porsche Cup tires on them All rims are in good condition performance and mechanicaly wise how ever there is alot of paint chipped of the outer rim from people struggling to put tires on. I have been using them on a E30 BMW race car there for stud pattern is 4x100. Unsure of offset but needed 10mm spacers on the front and rear to accomadate the michelin slicks as they sport quite a large side wall (64) Offers over $950 *about 6 fronts and 2 rears michelin porsche cup tires. great for track days etc. fronts are 240-64r18 rears are 270-68r18 $30 per front tire and $50 per rear 027 332 5567
  12. Hey everyone, I was talking to someone today who said its possible to put chain or cable links between your sus arms and the body to stop them going down all the way. In essance possibly lowering the car or stopping the wheels from droping down when you jack the car up. He said it would get rid of that "skiding" feeling under hard cornering when a sudden shaking/jumping sensation is felt throughout the car as if its griping then sliping griping the sliping. Is this possible? and would it make for better or worse handling? Cheers
  13. Hi all, was on the track today in my newly built e30 which was the first run up etc. got to about 4 laps when she blew the heater hose that goes to the header tank off and over heated. what caused it? we have modified the cooling system to work with a 325i radiator. the cooling out put on the drivers side goes to the nearest one on the radiator and obviousl the other one to the other port n radiator. then the heater hose port on header tank goes to the heater hose that would usualy be attached to the bottem of the m40's original radiator. and the breather hose to breather hose ofcourse. Is this a set up or disaster? has anybody done this before? it has just had a new water pump, thermostat etc. only things i can think of is wether or not my plumping is routed wrong. after this all happend, i re bled the system and tightend the section of heater hose that came off. idles fine but when i take it for a spin it blows the same hose off and same probems occur. Can it be that the pressure cap for the header tank is to heavy for my m40? (cap off a 320i) or blowen head gasket? not blowing smoke or any commen signs but it seems to be only culprit. please help thanks
  14. Hi All, For sale i have original BMW Motorsport Factory technical documentation on CD-rom with German Text for 1987-1991 (E30) BMW M3 Group A Racing models. This CD-rom operates on Adobe Reader. It contains a complete parts database with all part numbers, repair and overhaul procedures and sales documentation for 1987-1991 BMW M3 Group A Racing models. It also has the same for Group N models. as well as technical drawings for both group A m3's & N E30's including wiring diagrams and part blow ups etc..... Over 1000 pages $110 per copy. Free shipping withen
  15. no not kidding sorry! why is that? expanditure?
  16. Hi all, Am in the process of redoing my brakes and have baught new hoses, And am wondering whether or not it's possable to buy a roll of the same sort of hose to do all my lines? And how/where can i buy it, the fittings and crimp them etc...... cheers
  17. Hey everyone am in the proces of geting a new race set for my e30 and have come across these. for some reason i have a feeling they might be fake. i hope not but can't afford to waste my money on a cheap replica heres the link - http://cgi.ebay.com.au/2X-Recaro-Racing-Fi...%3A6%7C294%3A50 also, would anyone be keen to go halves on these as i only need one? if they are genuine that is cheers
  18. i have one for my race car but dont use it any more. ive modified it a little on the sides to fit around the rol cage but not too much. offer?
  19. hahahaha what a douche!
  20. Does anyone know where this road is! (the picture at the top with "motor cycle paridise" looks absolutly amazing! http://motorcycleparadise.blogspot.com/
  21. Lucky young guy with e46 m3 turbo 630hp at the wheels takes his dad for a spin! VERY FUNNY! http://www.youtube.com/watch?v=1XnvjYsRPZg
  22. i would still say they are the best bang for buck wheel you can/could buy, very very light yet quite strong and good looking. hopefully someone else starts bringing them in again.
  23. these wheels are 600 +gst for a set if you race. there are 3 sets left in new zealand and aren't being made any more apparently. what do you mean about the grill? i am trying to decide what colour it looks best - all black, black inside with white outside, or black outside and white inside. its a tuff one haha
  24. Heres my e30 race car i built. offers?
×
×
  • Create New...