Davee
-
Content Count
9 -
Joined
-
Last visited
Posts posted by Davee
-
-
Hi Glenn, Can you please advise what you mean by having to clear the adaptions. I replaced the Exhaust cam sensor like the deal said needed to be done. Tried to clear the code but when I use the Peake research code read I get a E10 or E11 which are the O2 sensors.
any idea's
Stupid me, E10 & E11 are error codes for the peak to indicate that has a problem with the connection to the onboard computer.
Once I turned the key in the car to the second point the reader reset the service light. All fixed. Pays to reread instructions sometimes
-
The camshaft sensors have gone up in price quite considerably Dave. If I can have your chassis # I can give you a price with member discount... and yes the fault codes need to be erased and adaptions nee to be cleared, you can only do this with a good scanner.
If you are in Auckland we can do this for you.. ring me @ Botany Motor Worx (09) 2722546
Hi Glenn, Can you please advise what you mean by having to clear the adaptions. I replaced the Exhaust cam sensor like the deal said needed to be done. Tried to clear the code but when I use the Peake research code read I get a E10 or E11 which are the O2 sensors.
any idea's
-
Ooops....been real busy
Sensor Retail $337.69 + Gst I can do for $287.15 + Gst
"O" ring $ 04.17 $ 3.75
+ Freight to you
Thanks Glenn and Ray for your assistance. Given I'm in Christchurch, I needed to buy a scanner from the US to clear the codes I have done this and ordered the part at the same time.
Pity your workshop is not in Christchurch
Thanks again for your help
Dave
-
Sometimes generic scanners wont cut the mustard. You must be careful... post a link
Hi Glenn, Did you manage to get a price for the Sensor Plus 0-ring? Many Thanks
-
Will do Tuesday morning. As Ray said...easy to fit, but you will have to get the fault code & adaptions cleared with an appropriate scanner.
Was the fault checked with a reliable scanner ?
Great thanks. Was checked at BMW - I'm keen to repalce myself once I undersand the new sensor cost.
Can you recoomend a good Scanner . I was thinking of getting a Actron CP9175?
Many Thanks
-
$100 including postage.
regards Ray
0212435526
Your offer is very tempting. Is this part new or second hand? Still need to check out what needs to be done to replace this sensor first, as I will need to be able to access the error codes to reset.
Dave
-
The camshaft sensors have gone up in price quite considerably Dave. If I can have your chassis # I can give you a price with member discount... and yes the fault codes need to be erased and adaptions nee to be cleared, you can only do this with a good scanner.
If you are in Auckland we can do this for you.. ring me @ Botany Motor Worx (09) 2722546
thanks - sorry I,m in Christchurch. Keen to get a price for the part if you can.My chassis # is wbafa520xolm44449. Thanks Dave
-
Hello, How hard is it to replace this sensor. Do I end to know hoe to reset any codes and any idea of the cost of the sensor, Thanks
X5 2001 Left rear door motor actuator
in Want to buy
Posted · Report reply
Hi, I'm looking for a replacement left rear motor actuator for an X5 2001 3.0. Part number 51228402601.
Can you help?