kiwifiat

up underneth behind the glovebox mounted into the side of the heater box , you will see 4 or 5 heavy gauge wires going into it.

see here lhd car but mounted in the same place , passenger side in a rhd car.

have some if needed , in papakura , can swap it out for you etc.

021433600

Thanks Brent, I found it. The fan works if I wriggle the connector so I guess I need a replacement. cheers.

I have googled and followed the haines book of lies and for the life of me I can not see the FSR. Usual symptoms climate control gauges all move appropriately but the blower is dead. Can someone clarify the location please ....

Unless its from an e21 it won't have a speedo drive.

There's no way the crossmember will bolt in - the boxes are longer. I modified an e30 one on my 2002tii and it was ok, but would have been better to have fabricated one I think. I used an early e30 shift linkage etc I think - lined up fine with the gear lever hole in the 2002.

I think I was able to use an e30 318i driveshaft.

I have a spare e30 box, maybe flywheel / clutch / pressure plate but not the rest. Would want $300 for the box, same as westy.

Thanks Cam for the heads up on that speedo issue. It looks like e21 5 speeds are like hens teeth so I will have to come up with a demon scheme to convert the old analog speedo to electronic so I can use a box from an e30.

Thanks to those who responded.

Hi Guys, I am after a 5 speed complete with shifter, cross member, slave cylinder and drive shaft to retro fit into a 1968 2000 Tilux. A box of an 4cyl e21 or early e30 fitted with a 4cyl M10 should do the trick.