dirty36

Want to buy x2 solid mass flywheels new or used and can be machined. also want to buy a clutch slave cylinder for 325i e36 located in Wellington.

Want to buy conversion kit, located in Wellington. cheers.

Details on 328i?

I’m just after something basic to build my first track car with, your e30 sounds like a little our of my price range.

Looking to buy a car that would be good for a track project so doesn’t need to be road legal. Preferably would like a manual 325i e36 but open to anything that’s manual. Located in Wellington.

yeah for a sedan, sweet thanks I will let you know how it goes because they seem quite hard to find.

want to buy e36 sedan tan headliner. Located in Wellington but can pay for shipping. Thanks.

Anyone selling a tan headliner for e36 sedan? Can pick up Wellington or pay for shipping.

Are the medium case axles also bigger on the wheel bearing side too?

Can this flange be taken off and put into a different axle? I've got the wrong axle so it won't bolt up to my diff and I've been trying to get my original axle out but it's rusted in.

Just took some pictures while I had the parts off car. Posting here if anyone wanted to know. (You'll need to disconnect the handbrake from the handle so there's enough slack to pull it out like this)

Are there any write ups about removing the trailing arm/ handbrake cable?

So I've stripped the bolt hole that holds the rear strut to the trailing arm pretty badly. The bolt can pretty much be pushed through. What do you reckon is the best way to go about fixing this? Cheers.

Thanks! I'll have a look after work.

When I lock my car from the drivers door it will only lock the drivers door and right rear but nothing in the passenger side, when I lock from the passenger side door it will lock all four. So my question is what part of the central locking system sends the signal from the drivers side lock to the passenger doors. Cheers.

Haha cheers. If you have any just let me know.

Based in wellington but will pay for shipping. I need some new or good condition used power steering lines for an e36 325i.

It's only just started so will have to keep an eye in the coolant level and if I'm loosing coolant i'll get a compression test. The car has never overheated and coolant sits at norm temp 90-100 degrees. One thing to note is that I haven't driven the car much in the last month or two and the smoke completely disappeared after a decent drive. There's just so much on startup which is a bit of a worry.

Okay so my E36 325i has a sh*t load of white smoke on start up and stays there until I have revved it hard while the engine is warm. Here's a few videos to show what it looks like on startup/warm and then what it look like after a drive. The smoke comes back once I've left the car off for awhile. Anyone know what's going on? Cheers. After drive idle.mp4 After drive.mp4 Idle with white smoke.mp4

Anyone selling a radiator for a 1993 e36 manual? i've already bought a "new" one off trademe and that just leaked everywhere and $650 from bmw is just crazy. Cheers.

Yeah, uses oem filter.

Nah it's "rallyandroad" from the states.

Brand new oil cap with oil cooler fittings and oil temp/pressure gauge fitting. $315 can ship anywhere in NZ.

Yeah that should work, just need more clearance so the inside of my rim will stop hitting my coilovers. Where are you based?

I'm after two 10mm wheel spacers asap cheers. 5x120. Located in Wellington but can pay for shipping.