rxhoon
-
Content Count
88 -
Joined
-
Last visited
Posts posted by rxhoon
-
-
-
-
For sale
E46 LS chev engine and gearbox mounts made by Pulse performance these come with are solid alloy mounts (but do fit std rubber mounts if wanted but everything is very tight and may knock with rubber ones ,
work with a moroso rear bulge sump the motor and gearbox in pic is LS2 with tr6060 tremec box from VE commodore
I want $1000ono for them
- 1
-
On 13/11/2016 at 7:08 PM, zero said:Five e46's is normal right?
If you do want it Zero let me know I could possibly deliver it next week as I am coming to get another car all going well.
- 1
-
1 hour ago, zero said:What brakes does it have?
And when you say the KW suspension is in not very good condition what do you mean?
Has std 318 rotors no calipers , brakelines booster etc, I was going to buy a 330d and use rear subframe and brakes etc ( I Can pass on the details for this to whoever buys this as it is a good price)
I do have a obp floor mounted pedal box that I want $700 for if you wanted to go that way
KW suspension is just the shocks are no good they are koni's so easy enough to replace.
-
1998 318 sedan
6 point roll cage Tig welded ( Done by Pulse Performance I have all photos for homologation)
KW adjustable suspension ( Not very good condition I was going to replace it)
Interior sound deadening removed
All wiring removed
All Glass removed (but is there)
All lights there
330 coupe front bumper ??
Guards cutout for wheel clearance and bolt on flares
All doors cut out and window mechanisms removed
Door hinges have been modified to lift off
Dash cover is there
boot floor , parcel tray , rear bulkhead removed
fuel tank removed
For the above I am looking for $3500ono This is the price I paid for the cage alone.Please let me know if this will not fit in the bmw class section I will remove it.
I need this gone as circumstances have changed and I will not have time to carry out my plan Make an offer
-
44 minutes ago, kiwi535 said:bigger than what?
Sorry I was meaning are they the same 330mm front brakes like the 330i i think
-
Hey can anyone tell me if a e46 330d has a large case diff? and bigger brakes?
-
Selling as I just dont have anytime to work on the car or the money to pay someone else to.
1998 318 sedan
- 6 point roll cage Tig welded ( Done by Pulse Performance I have all photos for homologation)
- KW adjustable suspension ( Not very good condition I was going to replace it)
- Interior sound deadening removed
- All wiring removed
- All Glass removed (but is there)
- All lights there
- 330 coupe front bumper ??
- Guards cutout for wheel clearance and bolt on flares
- All doors cut out and window mechanisms removed
- Door hinges have been modified to lift off
- Dash cover is there
- boot floor , parcel tray , rear bulkhead removed
- fuel tank removed
For the above I am looking for $3500ono This is the price I paid for the cage alone.
Other parts
- Autosport race seat (Blue with exposed kevlar back ) $350
- Autosport race seat (black with covered back Kevlar seat) $200
- OBP Pedal box (floor mounted with cylinders and reservoirs $700
- Rebuilt Chev l98 engine , New rings, bearings,hi volume oil pump hs108d cam h/duty valve springs, moroso sump,factory ECU and loom ,Tremec TR6060 gearbox Tilton triple plate clutch (used) $12,000.
- e46 LS chev engine and gearbox mounts ( made by pulse performance ) and ali solid mounts $1000
- 3
-
How is the car coming along?
Very slowly at the moment I have just ordered a SLR adjustable arm steering kit from the states and have a few more bars to add to the cage,
Then get it painted and sort the rear end and fit out all going to plan hope to have finished around Christmas.
-
Yea that is a good Idea I will have a measure up and see what may work ,
Thanks again E30-323ti
-
Thanks for that ,
It is much what I had thought I am happy to get custom axles made as the winters uses Porsche inner flanges.
\
Thanks
-
Hi looking for some advice on rear hub sizes and for different e46 models
I have a 318 that now has a LS chev in it and I am going to be fitting a independent Winters quick change diff head,
I am wanting to know what rear hubs and outer CV's are the largest/Strongest so I can start looking for some.
Thanks
-
-
Nice Engine mounts.
But yeah like Martin says, as well as the floor, I'd also look at doing some additional work to integrate the subframe mounting points into the roll cage.
Quite a few E36 / E46 people do this. Plenty of ways to do so, but heres one extensive example
Yea planing to do something similar and will tie it into cage.
Will work it out once diff is sorted incase I use my winters one
- 1
-
Was the LS out of a dirt track car?
Haha nah engine was in a car that was in a flood lots of silt through engine will be getting rebuilt in the next few weeks.
-
-
Sounds like the plan to hunt down a e46 m3 complete rear end
I will add few more pics of cage and mounts all done by PPRE
I will be running a aftermarket pedal box and steering column .
Motor will just be rebuilt with a big cam keeping it n/a and hopefully reliable.
-
Any Diff upgrade suggestions?
-
-
Pm me what sort of price you are thinking and we can go from there
-
Finally getting to the point I can start looking for a M3 rear end,
I am wanting a complete e46 M3 diff assembly can come without brakes springs and shocks but all other parts are needed let me know what's available and prices I have found a few in oz but freight is the killer.
Thanks
-
-
New post as I have changed around the whole project now.
Plans are
26bpp (four rotor ) engine
TTI sequential gearbox with M3 rear end ( or possibly transaxle with winters quickchange)
18x10.5'' wheels
full roll cage
fortune auto coilovers
rear camber arms and possibly slr front arms
hydraulic hand brake
big brake kit
and much more long term project
- 1
E46 LS Chev engine and gearbox mounts + Sump
in For Sale
Posted · Report reply
Engine and gearbox mounts for a E46 LS conversion
I had a l98(Ls2) with a 6spd tremec from a VE commodore
included is
Gear box mount and factory x member
engine Mount brackets
Alloy engine mounts
factory rubber engine mounts
Morroso sump and pickup to suit
Engine mount brackets and gearbox mounts made by Pulse performance race engineering (I machined the engine mounts myself)
$1500 ono