Hi-Tek 3 Report post Posted November 17, 2007 Hi guys, I stripped my Throttle Housing assembly apart to get all the small springs, nuts etc electroplated. I took what I thought to be enough pictures whilst I was taking all the bits off to help when the time came to put it all back together. Now all the parts came back to me on Friday and after I finished putting it all back together there was still one bit left and I can't for the life of me figure out where it is meant to go. It's has a 6mm thread and is male to female and a 10mm socket fits over the hexagonal end. As I'm new to the whole E30 M3 scene I don't know any owners here that I can go around to their place and have a look at their throttle assemblies. Do any of you E30 experts recognize the part in the pictures below? Any help would be much appreciated. Thanks a lot, Ollie. Quote Share this post Link to post Share on other sites
Gus 5 Report post Posted November 18, 2007 realoem.com might have a diagram that can help...else wayne (pussytamer) is on the shore if you want to look at his...cant think of any closer to central AKL Quote Share this post Link to post Share on other sites
nz320i 0 Report post Posted November 18, 2007 Look here http://www.realoem.com/bmw/partgrp.do?mode...hg=13&fg=15 Quote Share this post Link to post Share on other sites
Hi-Tek 3 Report post Posted November 18, 2007 I've been using bmwfans.info for my parts and diagrams but this part is not listed http://bmwfans.info/original/E30/2-T/M3-S1...13/ill-13_0282/ It's all good though as the s14.net lads sorted me out in a flash Quote Share this post Link to post Share on other sites
