|ncary 0 Report post Posted July 10, 2009 Just to let you know that the 75D hardness (Acetel/Delrin) is ridiculous in traffic and at idle. Everything vibrates like crazy.. But hell shifting is tight. Quote Share this post Link to post Share on other sites
brentf 0 Report post Posted July 17, 2009 Hey guys, Sorry for the late reply I have been very busy this week. I now have prices and info for you. The standard size for a E30 engine mount ( MY E30 Engine mount facelift 320i ) was 70mm od and a 42mm length. So I have allowed for a 3mm steel washer at either end and you will have to sort out a bolt or stud depending on which way you want to go. I have got a few prices depending on the OD the smaller OD the cheaper the price. Take $10 off the price if you can make the washers yourself and just want the polyuerthane or acetal part. Polyurethane Blue 70mm OD $43.60 ( Possibly red depends on what they have in stock at the time ) '' '' " 63mm OD $35.10 ( Possibly red depends on what they have in stock at the time ) " " " 48mm OD $25.00 ( Possibly red depends on what they have in stock at the time ) The Polyurethane is just standard 95 shore A Acetal White/Black 70mm OD $37.23 ( Can have either Black or White ) " " " 61mm OD $30.07 ( Can have either Black or White ) " " " 51mm OD $25.40 ( Can have either Black or White ) Prices are Each and Add $4.00 for freight Thanks Brent Quote Share this post Link to post Share on other sites
