WTB: Rising rate fuel pressure regulator adaptor

[Matty104 0]

Hey guys

Im looking to buy a Rising rate fuel pressure regulator, for the m20

But what i need is an adaptor that will allow me to tap into the fuel rail in the same way that the factory fpr does with the push it o-ring type fitting

Like THIS But with an m20 fitting

I can find kits for m50's but none for m20s

So if anyone has purchased one or knows where i can source one let me know. (would ultimatly prefer in NZ)

Cheers

[Deano 1]

Hey guys

Im looking to buy a Rising rate fuel pressure regulator, for the m20

But what i need is an adaptor that will allow me to tap into the fuel rail in the same way that the factory fpr does with the push it o-ring type fitting

Like THIS But with an m20 fitting

I can find kits for m50's but none for m20s

So if anyone has purchased one or knows where i can source one let me know. (would ultimatly prefer in NZ)

Cheers

I just used an old FPR, drilled it and attached it to the adjustable regulator

[pureboiracer 0]

or just t m50 fuel rail in.

[Matty104 0]

I just used an old FPR, drilled it and attached it to the adjustable regulator

What do you mean by drilled it? ,

I cut the top off one then gutted it and welded a cap on , (but it had a small leak so i thought id ask if there is proper one forsale.

[kerry 10]

get the welder back out haha , got that resistor ready for you man

[Matty104 0]

Mint, ill try pop in tomorrow