Surge 1 Report post Posted February 7, 2011 (edited) Hey guys, I've got a full set of Bilstein shocks, part numbers: Front - 36 0136 H003 (51mm) Back - F4 B36 0720 H001 (if anyone can offer some clarification as to what 'type' these are that would be great) They were in my e30 325i when I purchased it, so I can't say how many km's they've done. When they were in my car they handled great with the factory sport springs. I've since put Koni adjustables in mine and lowered it. I'm of the understanding Bilsteins can be re-valved, or rebuilt to suit your application. ~ $350 for the shocks. I've also got a pair of E30 control arm bushes, which appear to be nolathane (hard plastic) which look identical to this: ~ $80 for them. Edited February 8, 2011 by Surge Quote Share this post Link to post Share on other sites
tire 10 Report post Posted February 7, 2011 How used are the control arm bushes? Are they eccentric like in the photo above? A real photo would be good. Quote Share this post Link to post Share on other sites
Surge 1 Report post Posted February 7, 2011 (edited) I'll get a photo up of the bushes and the shocks at 12 when I borrow a camera. The bushes are not eccentric, the hole is bang centre in the middle with a steel insert - they appear to be in good condition. They were in my old 318i for about 6 months. Edited February 7, 2011 by Surge Quote Share this post Link to post Share on other sites
Surge 1 Report post Posted February 8, 2011 (edited) Sorry front shocks are still in the struts, pic is of one of the two rear shocks and one of the two mounts. Edited February 8, 2011 by Surge Quote Share this post Link to post Share on other sites
Surge 1 Report post Posted February 8, 2011 $300 for the shocks now. Keen on a deal for two front 51mm struts (or one strut and two replacement shocks!) Quote Share this post Link to post Share on other sites
