Boost Junky 1 Report post Posted January 4, 2012 Hey all, long time no post.. I'm after a few bits and pieces: - E36 Getrag 250 Clutch Slave Cylinder push rod - E30 Manual Pedal Box or just clutch pedal and bolt to add to existing auto pedal box - Clutch fluid hard line that runs between Clutch M/cyl and S/cyl hose - Rubber Clutch Hose from clutch S/cyl to Clutch hard line I know most of you dont like to part full manual conversions so also hit me up with a price on a full manual conversion kit minus the gearbox. Thanks in advance Quote Share this post Link to post Share on other sites
Silver Fox 43 Report post Posted January 4, 2012 Hi Luke, for the clutch to slave line I just used a spare hard line from the brake master to the drivers side wheel, and re bent it to do the job, lengths about right. For the soft part I used a brake line, front one from memory, again it works. Quote Share this post Link to post Share on other sites
oscar90 0 Report post Posted January 4, 2012 welcome back!! ...Building another monster??? Quote Share this post Link to post Share on other sites
Jamie W 0 Report post Posted January 6, 2012 welcome back!! ...Building another monster??? You could say that aye Luke =P Quote Share this post Link to post Share on other sites
Boost Junky 1 Report post Posted January 6, 2012 David - Thanks for that, I shall keep that in mind. Have just ordered an E36 Slave cylinder which comes with a push rod yay. Just need clutch pedal and manual brake pedal now. Andrew - Cheers, I am still on here once or twice a year haha. Well technically yes I am but unfortunately this time not for myself. However I should not count myself as being unlucky.. this project won't cost me a thing finacially and im sure Jamie will let me drive the monster Quote Share this post Link to post Share on other sites
