deshanv 0 Report post Posted March 15, 2012 Hi Guys, I need some help understand and choosing what is the perfect offset to go for on wheels for my M3. The rim is a Forged Concave 3 piece rim in 19" The fronts will be 19x8.5 and Rears will be 19x10 the lip will be 4-5 inches. I need to know what offset will fit perfect on my E46 M3. If I have mentioned anything that is not right please let me know as well. I am currently getting a company overseas to custom make the rims for me. They just need specs to give me a quote so need your guys help. Thanks Picture of the rim Quote Share this post Link to post Share on other sites
AN E30 Fan 1 Report post Posted March 15, 2012 (edited) About +35 in the front and +25 in the rear would be fine, are you looking for that 'flush' look? if so then a bit less in the front and rear offset. Edited March 15, 2012 by AJ_D Quote Share this post Link to post Share on other sites
deshanv 0 Report post Posted March 15, 2012 Thanks mate, I am after for an aggressive look, thanks Quote Share this post Link to post Share on other sites
AN E30 Fan 1 Report post Posted March 15, 2012 Wait until Jono sees this to confirm but that should be about right. Quote Share this post Link to post Share on other sites
DrphTa 5 Report post Posted March 15, 2012 (edited) That is running 19x10.5" with ET22 on all corners You could go as low as ET10 on a 8.5 in the front and ET20 on a 10" It all varies on how aggressive you want to be and what tyres you are going to run? Edited March 15, 2012 by DrphTa Quote Share this post Link to post Share on other sites
DrphTa 5 Report post Posted March 15, 2012 You can also use this site to plug in your old wheel specs vs new wheels It tells you differences so you can go out to your car and measure http://www.rimsntires.com/specs.jsp Quote Share this post Link to post Share on other sites
