IIIRII 0 Report post Posted September 22, 2012 (edited) I have a 318tiCompact pretty much completely stripped It has new trailing arm bushes, new rear wheel bearing, ally subframe bushes, The car is at the point where its about to have the cage done and all the welding finished. At this stage it has been turreted in the rear and has a cromoly frame for holding a ma 70 supra diff centre, on spuds tacked into position. You could just weld it all in and make some flange adaptors and job done. Rego on hold, it was an auto. It would be real seay to convert it back to a factory diff centre just by putting another rear subframe beam into it. Its rolling / I have all the glass and doors etc: to put it back together, I did cut some of the wiring loom to get it out but its pretty much intact (i wasnt going to use it as its overkill) It was a complete driveable car, I still have all the bits needed to make it a road legal race car etc: Im wanting $800 for thje rolling shell, without the diff centre. All part to go with it I have collected are negotiable to the person who buys it Open ma70 diff centre 4.55 or 5.3 ratio Including screw in studs 50mm L to convert the hubs to stud Adjustable front strut tops Aftermarket wiring loom Springs to suit the shocks (shocks are not for sale) Adjustable Pedal box Some other bits ive probably forgotten about PM Me a contact number Dont ask for any individual parts as the person who buys the shell has first option so that needs to go first. Cars in Franklin Area Ak Edited September 23, 2012 by IIIRII Quote Share this post Link to post Share on other sites
sp8s 1 Report post Posted September 23, 2012 Where are you ????? Photos would be good Quote Share this post Link to post Share on other sites
