Davehaynes1 1 Report post Posted December 16, 2016 Hi guys! just been out and picked up a remote central locking kit, ive fitted a few of these in the past to different vehicles but this one has stumped me! having a look through the VERY basic wiring diagram supplied and it gives me next to no info on what wires are what...... I have found a few forum posts and videos that give me some idea of what to connect up but i dont know what wires do what from my aftermarket central lock module...... The orange, pink and purple wires are usless to me so this leaves the red and black, obviously 12v power. Then i have grey, brown, blue, yellow, yellow/black. and all i am told is these are the cetral lock control wires....... not too helpful! Any help would be great! Thanks Quote Share this post Link to post Share on other sites
Davehaynes1 1 Report post Posted December 17, 2016 so far i have secured an earth.... hooked the red, yellow and yellow/black to a constant 12v and tried all combinations of the left over control wires into pin 4 and pin 17. nothing.......... Quote Share this post Link to post Share on other sites
Davehaynes1 1 Report post Posted December 18, 2016 (edited) got this sussed out now, hope this helps somebody else out there!! Bighawks m602 on a E36 BMW RED, BLUE, YELLOW/BLACK - +12V live BLACK - Earth BROWN - Lock YELLOW -Unlock just trying to figure out the auto window roll up now..... if i press my lock button 5 or 6 times it rolls the windows up, but there must be a way to have them do it with just one press! Edited December 18, 2016 by Davehaynes1 1 Quote Share this post Link to post Share on other sites
kiwi535 538 Report post Posted December 18, 2016 try 1 LOOOOOONG press Quote Share this post Link to post Share on other sites