Tommyd 4 Report post Posted August 30, 2017 Trying to buy some bbs rs rims for the bmw anyone put theses rims on a E21 320a before? What offset did you have/ did you have to roll the guards? Was going to go for a 15" probably 8" wide. Any help much appreciated Quote Share this post Link to post Share on other sites
Mr Vapour 76 Report post Posted September 1, 2017 there is no difference in the wheel fitment between any e21 so the fact that is a 320a is not an issue. you will be looking for a set of 4x100 with a low offset. Think 13-18 but you should go and do a google search, there are many many threads on this subject. Go have a look at e21.net. again there are threads over there. I also think there may be a thread on bimmerforums e21 section dedicated to wheels, most of the posts will have the wheel size and offset in the post, but photo bucket may have killed this photo thread. Do some research the answer is out there and is not hard to find at all. They are a bit of a odd ball in regards to wheels so it is a common question asked. 1 Quote Share this post Link to post Share on other sites
Tommyd 4 Report post Posted September 1, 2017 Sweet thanks heaps will do a bit more research over the weekend Quote Share this post Link to post Share on other sites
Mr Vapour 76 Report post Posted September 1, 2017 now photos of teh car please Quote Share this post Link to post Share on other sites
e30joe 1 Report post Posted September 26, 2017 Im running 16x8 et5 and 16x9.5 et 10 with 20mm spacers (to clear the struts). Front just needed guards rolled. Rear needed guards pumped by 15mm. 1 Quote Share this post Link to post Share on other sites
