kwakaturbo

Hi all I've just brought a e46 318 and the Egr pump is noisy can I remove the Egr system and block it of

Hi all I've replace the Icv but car is still idling high any other suggestions please

Thanks Brent but the throttle cable isn't wound up I've checked that but are the valves expensive and are they on the side of the inlet manifold

My daughter has a e46 318 that's idling to high there's no codes and no air leaks I can find any help please

Hi all with the e38 you get the chime and warnings that there is a bulb out can these systems be turned of or disconnected thanks

Thanks for your reply but I've done a Trans service new filter and fluid I brought a new scan tool and scanned it the code I got out of it was for speed monitoring can anyone shed any light on what this could mean thanks

Can anyone help with a wiring wiagram for towbar wiring as you need relays etc because of the Obc light warnings

Hi all my daughter has a e46 318 and sometimes when she's driving down hills as you back of the gas it gets a clonk in the drive live I've checked the diff and driveshaft they are fine and also occasionally the Trans will loose drive flare to about four grand and go into limp mode till you turn it of and reset it dies any one have any ideas what could be causing this and what will fix it thanks

hi james thanks for your reply ill take a pic of towbar its a propper bmw tow bar as for wiring thats standard wiring ive been told that there is a different wiring method due to the computor

hi all ive just brought a 94 e38 and ive just brought a towbar i want to fit can anyone help with and explanation or pics on how to fit and also how to wire it up

I'm not sure of what's what ,this one has fluid going to rear struts with some sort of level valve on the diff head that's also leaking I think, I this helps

Hi guys I've just brought a 94 e38 740 its got the sport suspension in it but the rears are blown no surprises there I guess now can these be changed out for normal struts and springs

is there any one out there wrecking a 325 prefacelift convertable im after a few bits and pieces thanks

ive scanned my car again and i get codes for solenoid valve 1 solenoid valve 2 solenoid valve 3 pressure reg 1 pressure reg eds 2 does this mean computor fault ????????????