-
Content Count
192 -
Joined
-
Last visited
Posts posted by reaper47
-
-
This Glove box has suffered the same fate. Sorry.
-
$200 for the lot now. or will break up.
Last chance for bits before I stick a Knife through the seats and take it all to the tip.
If you need something, just ask.
-
$10 ?
-
Yep
-
Now $250
$200 if you remove it.
-
Auckland
-
Perhaps
-
-
Hi all,
Anyone out there got a: Facelift E30 320 flywheel?
Don't care if its under weight. (not going in an e30 series car)
So if any E30 series guys or girls has one laying about and want a bit of coin, let me know
Nik G
Moderators: let me know if you think this should be moved.
-
I'm searching for part number 33312228200
It' the z3 mcoupe rear cross member. I have Trailing arms, diff, shafts etc. I just have a bent crossmember/ axle carrier.
I believe the e36 318ti one is similar. has different exhaust hangers and no exta strengtheners. (Not confirmed)
what are your thoughts?
-
Sorted.
-
More commonly referred to as a lower control arm check the part numbers on real OEM to confirm which other models it is shared with.
Already have. As above.
e36 m3 coupe, convertable and sedan
z3 m roadster and z3 m coupe.
Part 31122228461
-
I need a front left wishbone for a Z3 m coupe. I believe its the same one as the e36 M3's or z3 M roadster.
Cheers,
Nik
-
failed ignition coil .
oil down the spark plug holes .
broken fan blade.
get it scanned maybe
Has been scanned. nothing showing.
-
Is it wrong that I knew when it was being released and was at JB as it opened? -
What could/ would be the likely cause of a slight miss just above idol?
Car is a z3 m coupe. No miss above 3000rpm.
Could it be under-performing injectors?
any ideas would be appreciated.
Nik
-
If you gonna dump it, why not just give it away then!?
How about $20 for the Lip?
Sold
-
-
I think there are two different types of pre-facelift valence, the early ones are two piece and have a different attachement to the lip, later ones are single piece like the one in the pic.
If no-one else wants it Nick, I'll take it of your hands for a box of beers and pick up at Hampton if you don't want to drag it all the way to Manfield?
done.
-
This stuffs got to go. Make me an offer! All offers considered.
-
The front valence is PFL too..
It's F/L
P f/l valance comes in two pieces. Unless my pre f/l is different for some reason.
I did mis-label the lip though.
-
-
Mc F1's are so totally 90's
Ive posted this before im sure
http://www.trademe.co.nz/Trade-Me-Motors/C...n-213715231.htm
0 - 100km/h = 2.9secs
0 - 200km/h = 9.7 secs
0 - 400m = 10.75 secs
iWant
Shame, it looks like every other Porsche.
-
Please describe in short detail what driving a 3.2 M coupe is like. Especially with too much throttle after initial turn in.. Thanks
There are no words to describe it...........
S50B32
in Want to buy
Posted · Report reply
On the hunt for an S50B32 engine. Stock is good. But will consider anything. May even be interested in parts from damaged motors (S50B32) too. For the record I'm not interested in the 3ltr or the American version
What's this group got?