Forrest

Bump, looking for atleast one more, but can buy a pair or a full set.

Thanks

^ I am building a similar engine to yours with closer to OE spec cams for the first iteration and came across these: https://www.bimmerworld.com/Bosch-24lb-Fuel-Injector-Set.html they still might not be enough in your case.

Sold

Hi all,

I have my E46 330i Touring up for sale.

Brought from Turners Tauranga in September 2017, have completed 30,000km over the last four years.

NZ new - 3 previous private owners

M54B30 with ZF auto with steptronic - 179,990km

Oriental blue with full grey leather electric memory sport seats and wood trim

Style 96 - 17 x 8 with Firestone Firehawk Sport 01 (225/45/17)

Almost completely original spec including rear parking sensors, multi function steering wheel and arm rest. I have driven a few M54B30's coupled with the automatic and this runs the best out of all of them.

In my ownership the following things have been done:

• Valve cover gasket
• Water pump and thermostat
• Cooling hoses and expansion tank
• Intake boots
• Front control arm bushes
• Both front door window regulators
• Front seat panels repaired and re-dye
• Rear tail gate, rear passenger door and front guard replaced with matching color panels (previous owner had badly dented them)
• New Din65 battery (October 2021)
• Full set of new tyres (January 2021)
• Replacement front windscreen moulding
• Cupholders retrofitted
• Replacement front number plate trim panel

Things that let it down:

• The body work is a little rough, to be truly mint it needs a full respray, no clear coat lifting, just dents and scratches
• Rear tailgate switch is a little sensitive
• Air conditioning does not work - has been diagnosed, requires a new condenser (quoted 1k to repair)
• The passenger front window regulator is still slightly clicking (even after being replaced)

Looking for 5,500 ono, based in Upper Hutt, Wellington.

Thanks,

Nathan

Bump, still looking 

Hi all,

Looking for the following:

- BBS RX204 - 17 x 8, ET38, not worried about curbing/paint condition as long as they aren’t buckled 

Thanks,

Nathan

Hi there, confirming the passenger side door trim has the slight crack.

@M3AN it’s all yours, just tried to PM you maybe your inbox is full?

Bump, new items added

Wing sold

Fibreglass LTW wing added

Sorted - a mod can delete this one

Hi all,

Looking for a M20 facelift coolant cross over pipe. Came on all facelift E30 M20 and E34 M20 engines. Same as the picture shown, based in Wellington, happy to pick up or pay for shipping. 
 

Thanks

Gearbox mounts added in first post

On 6/27/2020 at 7:54 PM, KwS said:

I just had some mail from the UK turn up yesterday that was sent at the start of April. Must be finally getting through the backlog. 

Similar experience for me, I had some gearbox mounts (originally sent 18 March from Michigan via USPS) that didn’t move from Chicago airport for more than three months! And I gave up and ordered alternatives. Originals arrived today!

10 hours ago, Lucan said:

Selling the strut tower plates?

Haha sorry Lucan already gone!

Post edited with a few more items

Confirming the bushes will fit both a coupe and a sedan (same OE part number). The kit I had was for both top and bottom bushes, but only used one half, hence the extra pair. Non M3s ran one ball joint and one solid bush.

Unfortunately I don’t have any other extra bushes available. 

Hi all,

E36 ZF manual shifter arm, unmodified, no longer required due to a AKG shifter set up $40

Garagistic DTM style rear shock tie down mounts, fit E30/36/46, painted in red $20

Thanks,

Nathan

Hi all,

After a E36 ZF manual driveshaft.

Has the 96mm (bolt hole to bolt hole) flange on the front half (compared to 78mm for the Getrag).

Happy to buy complete (front and rear) or just the front half.

In Wellington, but can pick up or organise shipping.

Thanks,

Nathan

Hi all,

After another set of wheels to suit a E36. 

Must be 17 x 7.5 and fit over E46 330 front brakes.

Ideal would be a pair or more of Style 68 fronts or similar. Can travel/arrange shipping across the North Island.

With or without tyres is fine.

Thanks,

Nathan

Sold

Hi all,

Selling a set of 4 E30 basketweaves (15 x 7, et24), with 205/50/15 Toyo R888s.

Wheels have been sitting in a dark garage in storage but were previously used for a couple track days and balanced up fine. Couple of the wheels have had a very rough aerosol job, perfect as they are as track wheels or would suit refurbishment for anything more.

Tyres are 2007/2008 on the date stamps, so only really suit low key track days.

No center caps included.

Pick up can be arranged from Wellington or Kapiti Coast, or can drop to Mainfreight if the buyer can arrange.

Price: $500 including tyres.

Pictures: see below

Thanks,

Nathan

https://www.dropbox.com/s/bqjoq2rymv96awz/Photo 12-05-19%2C 11 07 51 AM.jpg?dl=0

https://www.dropbox.com/s/9ynge3l6c9d51m8/Photo 12-05-19%2C 11 08 03 AM.jpg?dl=0

https://www.dropbox.com/s/0dxodnxacfevcob/Photo 12-05-19%2C 11 08 22 AM.jpg?dl=0

https://www.dropbox.com/s/7ozpeild05imbqx/Photo 12-05-19%2C 11 08 39 AM.jpg?dl=0

https://www.dropbox.com/s/fwndpgfdjtld1fz/Photo 12-05-19%2C 11 08 53 AM.jpg?dl=0

https://www.dropbox.com/s/qwxlj45zwtyoao2/Photo 12-05-19%2C 11 09 07 AM.jpg?dl=0

https://www.dropbox.com/s/pd7kjf87hsoez4y/Photo 12-05-19%2C 11 09 13 AM.jpg?dl=0

Try - https://www.wags.co.nz/ they would be my bet for a rebuild in Wellington.

Hi all,

Looking for a spare wheel for the racecar to clear 330i front discs. Style 68 (17 x 7.5) or similar would be preferred. With a wofable tyre.

Based in Wellington, but happy to pay for shipping if it’s not local.

Thanks,

Nathan