mikes635csi

Hi there, we have been working down in the South Island with our simulator truck and heading back to Auckland mid January.. Would anyone be keen to have a BMW only day of racing in the sims (8) and run teams of 2-3 drivers over a long Bathurst 12 hour comp.. or something like that.. Any ideas come back to me and we can set it up.

Looking for a spot to park up for the day where we can have a few drinks and a BBQ

$100 per team

Anyone wanting to come out to one of the track days i run at Hampton Downs and spend a bit of time out in your own car is welcome to.. just send me a message and we can arrange it. next date will be in April 2017, still confirming it.. mike

Got the rear end adapter plates sorted so the new calipers can be fitted, then i can run the lines around..

Well, i have got a bit of traction going. The car has been out with Grady at HiTech which has been great, he has fitted the hydraulic handbrake with a new fabricated bracket inside, then machined up brackets for the new front and rear calipers, front are fitted perfectly but a bit of a fault on the rear where i ended up with one off a non vented and one vented caliper, so need to sort that with JD, then they can go on too. The master cylinder will go in next and i can run new lines around the old girl, twin boosters going in under the footwell in the passenger side..

got the front spoiler and rear bumper back today.. I had it dechromed and welded/fibreglassed together as one piece and i think it looks good, see what it looks like when fitted, need car back now..

haha, yep , but i am going to be too scared to be in the ring with you big guns

Got the headlights in and front surrounds back in, did these in matt black to offset the gloss.. i think it looks good.

Hi all, just getting back into it.. new screens installed, new calipers being fitted this week then all new lines etc, all gear from E39 and looking good, will post some pics over next few days. Mounting the 2 brake boosters inside cabin and have a new hydraulic handbrake to fit..

Hi,

It has been a while since i updated my project and now i find i cannot upload pics. Any help please

mike

awesome, thanks Peter

Hi guys,

if anyone can pass on to me Chris's mobile it wouyld be great, need to get an alteration made and can't fiond his number

mike

well, time flys by, and not a lot more done, headers are finished and have had HPC in black so looking good. have pulled the cross member out to see if i can fit a e39 rack and pinion set up to clean up the steering. some pics enclosed. have been spending most of my time is aussie so it has been hard to work on car but every now and then i get the chance so going to have a bit of a run at things over the next couple of weeks.

david lawrence tried oin his e28 535 i race car , not sure where he got with it ,

the early e24 is sleightly different front end to the later e24 and e28 type.

http://www.bimmersport.co.nz/forums/index....6652&st=150

Hi Brent,

Yes, mine is different, sway bar at front, but will look into it with Dave.. cheers

mike

Hi Guys, Have just fitted new headers into my project and decided it was time to think about the steering as well.. has anyone attempted a conversion on an e24 635csi coupe to rack and pinion, and if so what model should i use..

thanks heaps

mike

Hi Everyone, It has been a while since my last post and life has been busy. Have moved to Brisbane for work so now commute part time in each country. Have the car in workshop at TTT Automotive where Tim is running the headers and fitting the fuel tank and running fuel lines etc plus a few bits and pieces that i dropped the ball on..

Hopefully in a few weeks we will be able to run up the new computer and get her going..

Thanks for all the views and will post new pics soon.

part 3

part 2

a few pics taken at Racelign, now have the new camber plates fitted and the custom adjustable sway bars with all nolathane bushes..

Hello all,

It has been quite a while since my last post. FINALLY got the beast back from the panel and paint shop, still has the bumpers to do but other than that it is ready to go. picked it up a couple of weeks ago so have a look at the vid...

took it into Racelign who have fitted the front camber plates and new custom made sway bars with new mounts and nolathane bushes in both front and rear. unfortunately my camera has shite itself so will try and get some pics soon.

Need to get a complete header and muffler solution made up next so any ideas please feel free to let me know..

WHEW - it is now going to start coming together, it was very surreal actually picking it up after so long...

mike

we did it, finally painted, yeehah.

HaHa, i promise, only a couple more after the weekend once the body is finished. I can't help it... i love the old girl.

and...

and even more

and more

and more