SRBMW

Cheers I think ive got it sorted now

O Wise ones please tell me if a 94 320i e36 vanos motor will plug in to my 1991 e36 320i vanos. Cheers Darren

Wanted to buy. A mate needs a GOOD 2litre six motor that will fit in a 88 e30 let us know what you got.Prefer in Auckland or around about. Cheers Darren

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

Around $2000

Hi guys I will be selling the rear end out of my car soon it fully adjustable disc braked rear end to suit e30.The discs have done around 4000km and the bearings have done around 2000km.It has also had studs put into the flanges so you dont have to mess around with screw in type bmw ones.It will include the axles but no diff.Also the shock mounts has been reinforced for coilovers to be fitted if wanted.The ends on the arms have rose joints attached to them which allows full camber/toe adjustment.All tig welded by a professional engineer.Pm me if you are interested cheers Darren

Arr crap How do you delete a post??

haha yea that was me ,na no tickets he was a bit bumd out that I was fully legit and kept tryna find stuff wrong but couldnt!! Guess he was gutted he couldn't make his quota I was actually really surprised cos he the first cop to pull me over in bout a year and a half!!SAFER COMMUITIES TOGETHER :thumb: :thumb:

Well I went to the winterdrags today.Im glad there weren't any escorts down there cos I probably woulda got my arse kicked by them!! My times were prity shocking best of 14.2 and I red lighted just wheel spinning hard on the 17"s not much better than when it had the ca18det in it 2 years ago.Cambering 205 tires had about as much traction as some bmx tires.I chucked on the 15"s with some 215 but the toe in was shocking and wheels spun through third gear for 3/4 of the track.The car seemed to bog down on the line ,think i needed more revs!!.60ft and 1/8 times were crap. So dropped some pressure out the 15"s but didnt seem to make that much difference until i entered the burnout comp when they got hot and started to stick which sucked as I had to keep going back to 1st which I should have to do!!. Jeez this turning into an essay!!. But yea to sum it up.Think I need wider tires and to loose alot of camber and maybe run abit less boost.BLOODY BMA'S Shoulda left the 318I auto in it!!

Hey guys Ive got a rear m technic kit with the three lines through it and it has the cut out for the exhaust on the corner on an angle.I was wondering if anyone wanted to swap for the one with the exhaust coming straight out as this one wont suit my cars' exhaust. cheers darren

Finally the computer is in and tuned.It went on the dyno the first time and the clutch started to slip at 5000rpm but made around 240kw at the wheels so back home and I chucked a new 6 puck clutch in it and back on the dyno but this time on a different dyno which is supposed to read less than the first one and made just over 260kw at the wheels at around 6000rpm 18psi the tuner reckons that it needs an adjustable exhaust cam wheel to get the power up.So looks like another thing to get.Wish I could come to the dyno day to see what it puts out on torque's dyno but gotta go madigras in Ohakune.Hopefully go down the winter drags and post some times.

Not sure it suppose to have the three lines through it.Can you tell fom that ??

Well ive sold the autronic cos it was going to be a bit of a mish to run the sr20 with individual coils so im getting a link plus which suits my budget and will do what I want it to.Got some nizzmo 740cc injectors so heres hoping it will be in soon and tuned cos I wanna enter that burnout comp on the 1st of april but the month is going fast!!

okay what would you guys pay for the front cos i don't wanna buy it and then end up being short when tryna sell it on.

okay guys can you tell me what I should pay for m tech side skirts and rear bumper for a prefacelift e30.I allso will be able to get the front so if someone wants to buy that off me then Ill buy the whole kit.apparantly its all orignal and in good condition.Its the kit with the three line through it. Cheers Darren

Okay guys im looking for two mint e30 front guards and I need those little black(doesnt have to be black) pieces that cover the factory speakers up the front kick panels. Cheers Darren 0211645663

hey guys I need either a black or dark blue carpet for a e30 two door.And the little black panels that cover the factory speakers by the foot wells Cheers Darren

cheers for that ,don't think it will be in for awhile i gotta sell the 4age bmw to free up abitta cash then il get it alsortd,autronic doesnt have a base program so ive gotta be prepared to pay for tuning once its installed and i need bigger injectors ,heavier clutch maybe ,blah ,blah one thing after another, ill keep you posted

hey glenn with regards to the e36 5stud swap could u answer a few questons,I was looking on the parts computer at work and there is no e36 with 324mm rotors only new bmas like 2004/5 so which ones are you using also the ones that i found that where 324mm had a height of 77mm and the e36 had something like 52mm also what stub axles and bearings you using Cheers Darren

okay guys a dude came in to work with a 1988 325 and wants to sell it what do you thinks its worth.its 4 door charcoal facelift ,rebuilt auto trans waterpump and cambelt done,170kms twin 2" exhaust into chrome muffler 14" reflex mags,cloth trim apparently with a lsd.Geuss it could be sold without this how much do the lsds fetch these days. Cheers Darren

yea it supposed to be suitable for up to 550hp cos its a gt 30/40 but I dont think im gonna reach its full potential yet.Not sure when I see full boost havnt got the tacho sorted yet will do with the new computer.Its not as laggy as you would think but maybe too laggy if your used to ,twin turbo larger capacity early spool.Im only running 7psi at the mo so the turbo is still asleep Il let u know how it all pans out when I run 17psi. Question for you. Whats the max horse power a W58 gearbox will handle could it handle say 300kw+ Are they a good box and how much should you pay??Can the handle boosted toyota v8 torque. Cheers Darren

okay the MC's are 13/16 and 3/4 and it does have a balance bar. The turbo is 0.82a/r 84 trim it doesnt seem too bad its suits displacement of 2.0- 3.0 litres.Its ball bearing so its not too laggy. The wheels are a BSA's but they are rare ones that have been discountinued. They are p35 offset but I have spacers to clear the coil overs.I also have studs instead of the european screw in crap. Ihavent got any interior pics there aint anything great in there just some s6 rx7 seats and a couple of gauges.

sory i dont have any pics of the pedal box but it is a tilton/wilwood single pedal 7:1 ratio.Im prity sure its 0.86 il check.

one more

heres the engine bay pics. please excuse the very gay rubber stepdown and alloy pipe infront of my turbo thats for the factory nissan airflow meter and will be gone when the autronic is installed. Resize_of_Wha20F2.TMP