shanew

Sorry no mounts

Should be able to send it in a box for $20

Time for the last 2 things to go make and offer, can organise shipping if required.

Car is now gone, only two bits left remaining. First up is a dash board I recovered my self in faux suede. first time I have every done something like this so the finish is not 100% but I was happy enough with it. a few parts may just need a little glue to stick them back down. The other one is a carpet that was redied black it has a few small marks under the seats. Will sell for $80.00 each

Hey the bumper is chrome and has a black plastic trim through the middle, is that the style you are after? Bumper is in good condition.

Both seats and pedal box gone sorry, and I don't have any parts off the front bumper either.

Yep they are still there.

Bump, make an offer. I have rear seats that have been retrimmed in black Vinyl $80 for the set.

Yeah no sunroof

Bump

In rolleston

Not to sure of brand, both front and back appear captive front springs are red in colour and back ones maybe yellow or just rusty. Would be happy for $80 for the springs. Can't see one sorry. Not to sure, the front firewall has been modified to suit a will wood pedal box. Car is dark grey and they are pretty scratched up.

Hey Guys time to part out the project car. 1987 E30 coupe, mostly complete. No Engine, Gearbox or interior seats. Most other parts there from memory. keen to sell parts off cheap just to get rid of it. Car is sitting on lowered springs, the front in the picture looks a little high as it did have a SR20de engine in it. Cheers Shane

Bump, Willing to part out bits if required.

The time has come to sell off the project car as I don't have the time or energy to finish it off. Ill see how much interest there is selling at as a whole package and if need be I will then part it out. Brought the car about 6 years ago, Car has its rego on hold. The car is a rolling shell with as far as I can remember just about everything there. What it comes with. E30 rolling shell 2 x bucket seats Recovered rear seat with extra padding added to the sides and middle. Dish steering wheel and boss kit. Wilwood peddle box with Bias adjustment for brakes, Brake master cylinder position has been moved over to the drivers side to avoid the heat from the exhaust. Dash has been recovered in faux Suede to cover up a few cracks. 2 x Sr20de engines 1 is a short block that was being used as a dummy motor for mock up, Currently sitting on temp engine mounts. The other engine was apparently a good running engine that comes with an ECU. Sr20det Gearbox, comes with a short shifter, 5th and reverse where maybe a little crunchy, Also comes with the sr20det jack shaft. Carpet that has been redyed. Face lift loom fitted. Looking for offers around $1500.

The cheaper the better, I have no idea what these seats sell for these day? Let me know what sort of money you want for them.

Hey everyone looking for a set of front seats for a e30 bmw, condition is not important as I'm going to just use the rails off it. I'm based in Christchurch. Let me know what you have. Shane

Hey fellas as the title says I'm after a full loom for a e30 coupe, and also the carpet. Let me know what you have Cheers Shane

Hey man its Shane from Msport, whats the carpet like? could be keen on full body loom if you have it and also door cards, probable a heap of other parts to depending on what you have left.

Hey guys turns out I have made a stuff up when i first stripped my car down, I cut the loom by the fuse box knowing I was going to relocate it. However it turns out there are many wires that share the same colors on them so re-joining them is going to be nearly impossible. So im in the hunt for a new body loom, this is for a 87 e30 2dr. let me know what you have. Cheers Shane

Iv got one not to sure on condition although it should be all good as the only thing wrong with the car when I brought was a blown gearbox. Im going to a manual rack with the car so don't need power steering.

Try allcars they do all there parts for under $50

Allcars have 2 e30s there pretty sure they still had the engines in them.

This is something I have been putting some thought into lately, as Im going with a sr20 swap I want to get the brakes away from the exhaust manifold and at the same time get rid of the over complicated mechanism that runs across the firewall. From what I can tell the brake booster will not fit in the gap on the drivers side of the firewall, even with out a booster there is only about 110mm to fit a master cylinder. The option Im looking to go down at this stage is a modify the factory pedal box to accommodate a pair of master cylinders that connect the the pedal via a balance bar. That said if there is an easier and cheaper way to do it then Im all for it.