GeorgiePie

Legend. Have sent you a PM

Hi team, I need some help, ive tried a few different wreckers and im unable to find the below level sensor for the drivers side rear, Number on the sensor is - 1 093 698 http://www.realoem.com/bmw/showparts.do?model=DP52&mospid=47558&btnr=33_0530&hg=33&fg=50 Part#15 Level Sensor. Vehicle, BMW E39 Touring 99' SLS Rear, SLS is inactive and i found that the link arm had snapped so i assume this is the culprit. Trying to replace the link so i can get her roadworthy again I tried Brent at BMWorld but no luck there, are there any decent wreckers around Wellington region? Thanks.

Cheers, Ive sent you an email Brent AJ

Wondering if you can help - I have some aftermarket headlights installed on my E39 Touring and the indicator bulb socket isn't secured to the headlight itself - its the wrong size? The bulb type i have currently is a PY21 amber bulb - bayonet fitting. Do you have a part that would allow me to fit the indicator bulb socket securely to the headlight, previous owner had taped the lights in place and i failed WOF! Thanks.

Wondering if you can help - I have some aftermarket headlights installed on my E39 Touring and the indicator bulb socket isn't secured to the headlight itself - its the wrong size? The bulb type i have currently is a PY21 amber bulb - bayonet fitting. Do you have a part that would allow me to fit the indicator bulb socket securely to the headlight, previous owner had taped the lights in place and i failed WOF! Thanks.

Thanks elmarco, The bulb type i have currently is a PY21 amber bulb - bayonet fitting. Would it matter what type of bulb i have as to what i need in terms of fitting it to the headlight? My biggest problem is getting the fitting into the rear of the headlight so that the indicator bulb and fitting are secure. Are Ray and Brent under different usernames? Thanks again

Looks like i need this part here, surely someone will be able to supply this in NZ? http://www.ebay.com/itm/BMW-E39-540-528-M5-Bulb-Socket-For-Front-Turn-Signal-GENUINE-BMW-/170726247135

Ahhh...im sure i can make a bracket up however there must be a part im just unsure where to look or who to ask I'd rather keep it clean and tidy then rough.

Hey guys, I have some aftermarket headlights installed on my E39 Touring, took it in for a WOF at the local VTNZ and it failed due to the indicator bulbs in the headlight not being secure....they were taped in by previous owner! Is there some sort of easy fix i can do for this eg harness or bulb holder that will plug direct into the wiring harness that im already running? Im not running HID, Keen to get this sorted asap, would i need to get intouch with Miland or do some diy - which id like to avoid. Open to suggestions though Thanks.