thirdkide30
-
Content Count
87 -
Joined
-
Last visited
Posts posted by thirdkide30
-
-
How much do they go for with no tyres. 15" basketweaves bmw ones not bbs
-
Where is pick up?
-
Yeah..Now im wondering if it does have a blown head gasket, but symptoms arent happening so not sure? would it be worth changing the gasket if the engines done 200k km?your cooling system looks in bad shape...
-
PMdYep comes off, 2 13mm bolts holding that whole housing to the head. I have a spare entire housing liying around of no use if you want it give me a PM.. Just place your sensors into it, thermostat and bolt it back to the head and join the hoses up.
Thanks for that. Will be doing exactly this.judging by the amount of crap that has blocked it up i would recomment a new thermostat, also putting a hosepipe through your radiator and through your motor. to get that part (thermostat housing off you will need to undo the 2 13mm bolts holding it to the block, you will also need to loosen your fuel rail and remove any sensors in it as they will hit on the fuel rail when trying to remove. once removed replace with a good unit. new thermostat, and just check the condition of the hoses while your at it. flush it all out as well as you can with the garden hose, refit all parts, seal between the thermostat housing and the block with a gasket, or liquid rtv. and bleed cooling system with good coolant.
Oh damn. Blown head gasket? The symptoms of a blown head gasket arent really happening but is there any other way of checking?That's what my cooling system looked like after my head gasket blew and oil went through it....
+1 to everything oli said.
Would even be tempted if you have the cash to get a radiator place to clean it out properly... that crap isn't good for your waterpump.
-
Im in need of some help. One of the radiator hoses has blown off and has taken the male bit with it. It is the one located underneath the radiator pipes on the engine itself. Can it be repaired or changed? Can i do it myself?
Here are some photos of it
Came off the bottom of this bit. Can i pull it apart?
-
Still gota love the muscles tho
Not sure if this is reposted but damn looks good
-
Well got a second hand cluster from Andrew. Cluster was working when it was taken out but when i put it on mine, the check light didnt and temp gauge didnt work. I pulled apart both and mix and matched the ones that werent working. So now got the old cluster, with the new speedo, fuel gauge, SI board and rpm. and now the check light doesnt work on the old one.
Just wondering if a 318 cluster is the same as a 320?
-
Yeah its a honda. Rolling chassis and is hell cheap. Plus i still got an engine sitting in the garage so might as well..Ur buying a honda arent you ?
Is this a transport firm like bikerchris is talking about?Or you could ring Shady's mate at transpro services.
Funny read that.
Bad thing is the car isnt drivable. Its pretty much rolling and has no wind screen and no wof so i doubt the guy would risk getting it up to Napier. $291? Thats cheap as, might try see if i can get it towed to Napier with a proper towy. Bad thing about the whole towing thing is that i cant personally see it as many have said. And pics can be deveiving...http://www.captaintransporter.co.nz/index.php
I've not used their services before, but someone on NZhondas has and said it was good and reasonably priced. There's an online calculator too (but no Hastings listed)
$291+GST from Napier if the car is drivable
Also if anyones in the know of a good mate that knows things about cars and is willing to check it out please pm me.
-
Just needing everyones opinion if i should tow a car from hastings to auckland or if i should just go borrow a trailer and just get it myself.
Also if you know any good cheap towies that can do the job please let me know or if theres another way of getting it up.
The trip down to hastings from aucks is around 500km one way and the towy will cost around $400. What do you reckon is more worth doing?
Also the car is just a rolling chassis and engine is not running yet..
-
Was trolling through a site and found these..
-
MY engine is a 320i and its overheating very very slowly. Like it takes while for it to overheat. Usually i can drive around with the temp on normal for atleast half an hour and after that the temp would slowly rise up. Overheating light doesnt go on but light may be faulty.
Could it be thermostat? And also the fan doesnt seem to be running fast too..
-
OT/ How much did you pay to get them compressed?
-
Damn that new link is much better..A lot of work has been done to it by the looks..
Just gotta wait for RIPS to get their hands on one..
-
Needing a favor from someone in Hastings to check out a rolling chassis for me. Someone who knows their jap cars. Please pm me if there are anyone that can.
Cheers
-
Theyve been out for quite awhile and only now one goes the 9s.
http://www.gtrblog.com/2010/03/21/ams-smas...rrier-at-tx2k1/
-
PMdI've got one, needs new bearings/rebuild. $100 and its yours. Can arrange shipping to Auckland.
-
PM'dHow keen are you? I've got ground control coilovers with eibach springs for sale.
-
Tried switching the switches around and drivers side is still not working.
I tried taking the door card off but got stuck on the door latch and the handle. How do i get these off? Sorry for the noobness
-
-
Anyone?
-
Im pretty sure they only come installed and not separate. Ive tried looking for them too but no luck and was told you can diy them??.
-
bump
-
How much for the box and how much would shipping be to aux?
-
Please pm or text me on 0210330047 if there are any. Preferably in aucks but dont mind if in hami also
EOI Basketweaves
in Want to buy
Posted · Report reply
Thanks for that. Thinking of selling mine but not sure how much theyre worth. Thanks again