rxhoon

I may just put two ''Dumpy's" on it now. Thanks Tim There seems to be a few good ratio medium case diffs available. Its only a rotary so torque wont be huge. Car will predominately be a track car .

I was going to be fitting a xr6 turbo engine which was far to tall for engine bay so I have sold the engine and now going to be going rotary so could be 400+hp from a 1.3ltr turbo or 2ltr N/A

Hi Can anyone tell me with roughly the power handling capability's of the factory e46 diffs. I have a 318 and know I will need to up grade but possibly would like to run a medium case if possible. looking to have 400 rwhp. Thanks

Any one looking for a race car project?? http://www.trademe.co.nz/Browse/Listing.aspx?id=747930534

Can you email me what you have available and prices please [email protected]

Looking for a good set of adjustable coilovers for my e46 sedan I will need ones suited to 6cyl as I am running a heavy engine, Would like a set that I could possibly dial in positive camber but I can mod if necessary. Thanks

1998 318i black leather door trims all good condition except panel you take off for access to screws not damaged just clear pealing off . In wanganui can post at buyers expense offers pm or txt me 0278206067

Looking for a after-market type pfl e46 sedan front bumper . Or anyone know how hard it is to make a 2dr bumper fit a sedan. Thanks

http://www.trademe.co.nz/Browse/Listing.aspx?id=698085346

any offers ??? you don't see many e46 body's for sale

All and any offers considered just want it gone now real cheap start to a e46 race car

This is still for sale if anyone interested I have just brought a new house so wont be doing anything with it for a while so keen to sell and make space.

Wanganui

Looking for a complete e46 m3 rear end to convert my 318 or even parts of one to start piecing one together Thanks

Bit of a change of heart have brought a xr6 turbo engine for it and going to run a dogbox. What is the best Diff to look at for it and is it just a matter of changing the head/housing or better to change the whole rear subframe? Thanks

http://www.trademe.co.nz/Browse/Listing.aspx?id=646847556

1998 318 e46 sedan red paint really faded and clear pealing no carpet no centre console no seats front guards have been beaten out for clearance and are rough and both bumpers are rough missing a few unknown bits in egn bay de regd in Wanganui good race car project which is what I have planned but just don't have any time for it currently pm ph or text 0278206067

sorry haven't been able to send pics but have listed on trademe http://www.trademe.co.nz/Browse/Listing.aspx?id=643720189 Will sell out of trademe for less fees

I will get some pics sorted tomorrow sorry I have not been on here for a few days

Front and rear seats full black leather and door trims good condition . I have not had a real good look at them but if anyone interested ill take pics and send them through looking for $600ono

Starting to strip my e46 318 sedan ready to start race car build. let me know any parts required and how much you want to pay. I wont be having parts hanging around for long will dump them if no interest . Has full black leather interior auto mtr all interior trim In wanganui but can send at buyers expense pm / leave reply or txt me 0278206067

Ok So looking at a E34/E36 M50TUB25 MOTOR on Trademe would this be a good start for turbo build up (forged pistons rods etc) Also is there a good strong BMW gearbox or am I better of looking at other options same with the diff is the large case a bolt into the std rear subframe or better to buy a complete m3 rear end if I can find one? Looking for at least 600rwhp now Thanks for all you help

Hey mate do you still have these?

looking for a std set of springs for a 318 just to get car re vinned

Ok I think I have decided to go down the BMW engine path Is the BMW M52B25 Engine a good option for turbo charging will obviously drop compression with forged pistons head studs forged rods etc Or is there a better base to start with. I think I would prefer the turbo six over the v8 option Also does the front sub frame (cross-member) need to be change to fit the six into the 318? Thanks for you help guys I haven't picked the car up yet so working a bit blind for a week.