Andrew 30 Report post Posted June 20, 2007 From my race car. Am looking at building a more wild M20 for my race car. I'm looking for a 325 block/head (don't need pistons or crank, just conrods, no over-bore) Head doesn't need cam. Would discount the price if you could supply me an exchange motor. I'd be looking at $2000 for my motor. It has been built by Ernst at Bavarian - 2.3 ltr head on pre-fl 2.5 block. Lightened crank, conrods - fully balanced. Head totally rebuilt including new cam. New everything basically. Rev-limiter has never been set higher than 6800 RPM and engine has never been money shifted. Can be seen running in the car. Has done approx 8000 kms since built. Looking to sell as I'm building a 3.1 ltr m20 for the open class. Motor has 185 rwhp* *measured on Bob Homewood's dyno * with Link ECU, custom headers, custom intake, ford 5 ltr fuel injectors Quote Share this post Link to post Share on other sites
ED1RTY 2 Report post Posted June 21, 2007 Andrew, how much with everything to get it running? Quote Share this post Link to post Share on other sites
Andrew 30 Report post Posted June 21, 2007 Well - I'm building a 3.1 ltr M20 so I need my Link, Headers and intake stuff. I'll also want my fuel injectors. I'll probably want my dizzy and stuff like that also as it's all new. To get it going you'd want - Injectors, ECU (You can get VERY cheap Link LEM V5s). Obviously my tune will work on it fine and only need minimal amount of tweaking. Quote Share this post Link to post Share on other sites
Guest Phil Ken Sebben Report post Posted June 21, 2007 Can you guarantee flame shooting on overrun? Quote Share this post Link to post Share on other sites
Andrew 30 Report post Posted June 21, 2007 Can you guarantee flame shooting on overrun? With a link set to fuel cut 'no' - yes Quote Share this post Link to post Share on other sites
Andrew 30 Report post Posted June 22, 2007 SOLD - And ordered crazy engine for race car Quote Share this post Link to post Share on other sites
Murrayc 1 Report post Posted June 25, 2007 Andrew, Where are you getting your 3.1 ltr. I'm looking at a similar upgrade. Do you know where I can get hold of a M52 2.8 crank. Are some our you Auckalnd blokes coming down to Mainfield on 22 July. Murray Craig (Wgtn) Quote Share this post Link to post Share on other sites
Guest Phil Ken Sebben Report post Posted June 25, 2007 Murray, either of these shops are your best bet: http://www.metricmechanic.com http://www.bmw2002.com/ Quote Share this post Link to post Share on other sites
Andrew 30 Report post Posted June 25, 2007 Andrew, Where are you getting your 3.1 ltr. I'm looking at a similar upgrade. Do you know where I can get hold of a M52 2.8 crank. Are some our you Auckalnd blokes coming down to Mainfield on 22 July. Murray Craig (Wgtn) bmw2002.com [ireland Engineering] - let me know if you do order. Pistons back in stock in 3 weeks or so. If you do get it from them we could save a bit on shipping. Quote Share this post Link to post Share on other sites
David 0 Report post Posted June 25, 2007 Are some our you Auckalnd blokes coming down to Mainfield on 22 July. Murray Craig (Wgtn) Yes, Peter and I are comming down. Quote Share this post Link to post Share on other sites
