thinking of fitting a set of these to the e28 M535i M88

[BM WORLD 1283]

any one know of a local crowd that could knock up a set .

these are from fritx bitz in the UK .

cost 750pounds plus 80for freight .

also want to remap the ecu and change the afm for a hot wire or some sort .

got any ideas .

[silly 0]

any one know of a local crowd that could knock up a set .

these are from fritx bitz in the UK .

cost 750pounds plus 80for freight .

also want to remap the ecu and change the afm for a hot wire or some sort .

got any ideas .

Brett

I got set of S/S RHD headers for my 325i M20 from Longlife exhausts UK (Cardiff Exhausts) ph 02920473131 www [email protected] 489 pound + $900 to ship by air freight - they were three into 2 shortys so had to fabricate the collector here and coat them. Shipped them with Panalpina Ph 275 6175. Not cheap but good.

Nobody did them here at that time and had a couple of quotes which were more expensive than getting them from the UK . You could ship them by sea if you want to save some$

Longlife came recommended by E30 zoners

PS thanks for the contact on the rods for the 2.7

Brendan