NZPED 2 Report post Posted March 1, 2009 (edited) Recently my stereo has been playing up heres whats up on my alpine stereo in my 85 E30 - No sound through RHS speakers - Above the stereo there is an external balance control - courtesy of BMW, if this is centered or to the right i get no sound at all, if it is to the left the left speakers will work. - I can smell something burning, the external ballance control heats up when the stereo is on. - When i disconnect the external balance i get sound out of the LHS speakers. So im guessing the headunit or the external control thing are screwed. I dont have a lot of money but would like to get my stereo working again, so... Would i be best to go into an car audio place? in which case, where is good? Im on the north shore or just buy a new head unit ? If anyone would like a pic of the external control thing to help give me advice i can take one. Cheers Edited March 1, 2009 by NZPED Quote Share this post Link to post Share on other sites
Mike 1 Report post Posted March 1, 2009 I'd try re-wiring it so that the head unit goes straight to the front speakers. if its still not right then I'd say the headunit itself is stuffed, so time for a new one. Quote Share this post Link to post Share on other sites
BM WORLD 1283 Report post Posted March 1, 2009 have all the parts if needed . factory alpine headdeck , factory boot mounted amp , and fader controls if needed . can try them out all parts a plug and play , also check the resistance of each speaker when unpluged they could be shorting or cone seized up . should measure about 3.5ohms on a meter. 021433600 Quote Share this post Link to post Share on other sites
NZPED 2 Report post Posted March 6, 2009 Thanks for your help guys, ill check the resistances, if the resistances are all around about 3.5 ohms is it safe to assume the speakers are all good? Quote Share this post Link to post Share on other sites
BM WORLD 1283 Report post Posted March 7, 2009 Thanks for your help guys, ill check the resistances, if the resistances are all around about 3.5 ohms is it safe to assume the speakers are all good?yes . are the cones free to move or sticky ??maybe fault with amp on unit etc . i have some std bmw radios and factory amps etc Quote Share this post Link to post Share on other sites