Jump to content
Sign in to follow this  
NZPED

E30 Headunit - Advice Please

Recommended Posts

Recently my stereo has been playing up heres whats up on my alpine stereo in my 85 E30

- No sound through RHS speakers

- Above the stereo there is an external balance control - courtesy of BMW, if this is centered or to the right i get no sound at all, if it is to the left the left speakers will work.

- I can smell something burning, the external ballance control heats up when the stereo is on.

- When i disconnect the external balance i get sound out of the LHS speakers.

So im guessing the headunit or the external control thing are screwed.

I dont have a lot of money but would like to get my stereo working again, so...

Would i be best to go into an car audio place? in which case, where is good? Im on the north shore

or just buy a new head unit ?

If anyone would like a pic of the external control thing to help give me advice i can take one.

Cheers

Edited by NZPED

Share this post


Link to post
Share on other sites

I'd try re-wiring it so that the head unit goes straight to the front speakers. if its still not right then I'd say the headunit itself is stuffed, so time for a new one.

Share this post


Link to post
Share on other sites

have all the parts if needed . factory alpine headdeck , factory boot mounted amp , and fader controls if needed . can try them out all parts a plug and play , also check the resistance of each speaker when unpluged they could be shorting or cone seized up .

should measure about 3.5ohms on a meter.

021433600

Share this post


Link to post
Share on other sites

Thanks for your help guys, ill check the resistances, if the resistances are all around about 3.5 ohms is it safe to assume the speakers are all good?

Share this post


Link to post
Share on other sites

Thanks for your help guys, ill check the resistances, if the resistances are all around about 3.5 ohms is it safe to assume the speakers are all good?

yes . are the cones free to move or sticky ??

maybe fault with amp on unit etc . i have some std bmw radios and factory amps etc

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...