Nick Beulink 0 Report post Posted June 10, 2009 Does anyone know a place in Christchurch where i can go to get a manual conversion for a 6 cylinder e36 at a low price? Quote Share this post Link to post Share on other sites
antony 0 Report post Posted June 10, 2009 (edited) Not sure how much, but call Eurorec. Wont be cheap, but will be done right. Edited June 10, 2009 by antony Quote Share this post Link to post Share on other sites
oscar90 0 Report post Posted June 10, 2009 My mate got his done at just an ordinary wreckers...was a VL though so it used nissan parts and like anything nissan-ish went together like lego...an idea none the less though Quote Share this post Link to post Share on other sites
nutter 1 Report post Posted July 1, 2009 (edited) Hey there i might have a gear box and drive shaft from a E34525i M50 2.5L Dohc,Not sure if it will fit but i have done a Manual holden VL gearbox into a Nissan cefiro and all i needed was to get the drive shaft cut welded and ballenced could be a thought if you cant find a kit Edited July 1, 2009 by nutterbutter Quote Share this post Link to post Share on other sites
BM WORLD 1283 Report post Posted July 1, 2009 Hey there i might have a gear box and drive shaft from a E34525i M50 2.5L Dohc,Not sure if it will fit but i have done a Manual holden VL gearbox into a Nissan cefiro and all i needed was to get the drive shaft cut welded and ballenced could be a thought if you cant find a kitwrong gearbox and driveshaft for a e36 .driveshaft will be to long also gearbox is different to what the e36 use , different length and gear levers wont line up etc. i have a e36 kit availible , have local bmw wreckers before cost about $500 in labour Quote Share this post Link to post Share on other sites
