_BRS_ 209 Report post Posted June 30, 2014 Bloody nice work! Quote Share this post Link to post Share on other sites
euroriffic 609 Report post Posted June 30, 2014 Cheers fullas, yea M3 I spose. Don't know if I can trust them on the missus 46 haha. Brought some nice new slotted rotors to hide behind them too Quote Share this post Link to post Share on other sites
euroriffic 609 Report post Posted July 6, 2014 Right! So now that I have another up and coming project I thought I better get my sh*t together and get these finished! Spent most of today stripping and cleaning all the terrible condition clear coat off the other 3 wheels and now all ready for sanding, polishing and painting the inner barels gloss black. Unfortunately I'm still out of town most of next week but that should be it for a while so should be able to spend my nights in the garage getting them done. Yay!!! Quote Share this post Link to post Share on other sites
BMA-HO 7 Report post Posted July 30, 2014 Thats nice Quote Share this post Link to post Share on other sites
euroriffic 609 Report post Posted July 31, 2014 Cheers, got another hour in today sanding and now that I'm FINALLY!!!! Finished working out of town and I can them finished 1 Quote Share this post Link to post Share on other sites
2052NV 43 Report post Posted July 31, 2014 when are these going on a car! haha Quote Share this post Link to post Share on other sites
euroriffic 609 Report post Posted August 1, 2014 Well the auto spectacular is the 13th of sept so if we enter again, hopefully we can get a banner this time and my new brakes and springs show up, will try aim to have them done then Quote Share this post Link to post Share on other sites
m3Dakar 5 Report post Posted August 3, 2014 you should sell me them lol Quote Share this post Link to post Share on other sites
euroriffic 609 Report post Posted August 3, 2014 I'll sell you the 17x8 style 5s that's are currently on the M3, but not these haha! Quote Share this post Link to post Share on other sites
BMA-HO 7 Report post Posted August 4, 2014 Haha i wouldnt sell them if i had them either lol. Can you tell me what i could use to shine and protect the chrome of my rims. Like what products and what tool. Thanks. Want to give the dish a nice shine Quote Share this post Link to post Share on other sites
euroriffic 609 Report post Posted August 4, 2014 If it's already polished like my current style 5s I just use mothers mag wheel polish to restore the shine, use miguires cleaner wax to protect and now have some poor boys wheel wax/sealer to stop road grime and break dust sticking and eating into it. Seems like pretty good stuff Quote Share this post Link to post Share on other sites
JJohnsen88 9 Report post Posted August 7, 2014 Boom! Panty droppers! image.jpg God damn! Those are cleaner than an OCD sufferers kitchen, one hell of a transformation. Really got me itching to crack into my BBS/ASA Revolutions What sort of finish do you get back from the lips being skimmed? I have a couple nasty curb rash gouges I need to remove. What sandpaper grades do you recommend? Thank god I still have the factory 16's to put back on while I transform mine. Quote Share this post Link to post Share on other sites
euroriffic 609 Report post Posted August 7, 2014 Skimming took all the rash off, but then need to sand all the machining marks out then slowly work your way through the grades to get rid of the sanding marks. Started at 100, then 120, 150, 180 220 then carry on all the way to 2000 then buffing wheel and compound, wheel polish and finish with cleaner wax and seal with poor boys wheel sealer wax. Long ass process! Quote Share this post Link to post Share on other sites
JJohnsen88 9 Report post Posted August 8, 2014 Wow that sounds like a long drawn out process but so worth it in the end they look amazing. Where abouts did you get the wheels slimmed and what sort of $$ did it sting you? Quote Share this post Link to post Share on other sites
euroriffic 609 Report post Posted August 8, 2014 Got them done at automotion, was about $20 a wheel, depending on how bad thy were Quote Share this post Link to post Share on other sites
m3Dakar 5 Report post Posted August 9, 2014 What sort of bank for the style 5s Quote Share this post Link to post Share on other sites
euroriffic 609 Report post Posted August 9, 2014 (edited) Need the other set finished before I even think about selling, that's if I do, but paid 2k for them, and then tyres on top of that Probably keep them and use one as a light shade Edited August 9, 2014 by euroriffic Quote Share this post Link to post Share on other sites
euroriffic 609 Report post Posted September 9, 2014 Had a bit of spare time the last few nights so almost have another one ready, just needs another good going over with the polishing cone and then a hand buff to finish it off. Halfway there! And now these have shown up to go behind them Quote Share this post Link to post Share on other sites
euroriffic 609 Report post Posted September 10, 2014 So first wheel took almost 20hrs on just sanding to get it ready for machine then hand polishing and tonight managed to bang one out in 2.5hrs! Musta pissed around waaaaayyyy to much on the first. But was a learning curve so think I've got the gist of it now. Also mate of a mate does amazing polishing work in timaru and has just done one of the non sanded wheels and from the pictures looks pretty good and cheap too so might have to get him to do the machine polishing. Also looking into getting a clear powder coated on them but awaiting more info. Not long to go now Quote Share this post Link to post Share on other sites
euroriffic 609 Report post Posted September 28, 2014 (edited) So!! They're finally done!!! Well, almost. Got all 136 gold spikes bolted, torqued, and lock tited up last night after spending the week painting the inside of the barrels. Just need to figure out what tyre sizes I can run and to glue the polished stainless caps onto the centre caps Then to start on the style 40's Edited September 28, 2014 by euroriffic 1 Quote Share this post Link to post Share on other sites
Ahmedsinc 414 Report post Posted September 28, 2014 You have a set of 40s as well?? f**k I hate you!! Awesome job on the fives, the gold bolts look a bit mexican for my old man tastes but killer job nonetheless! Quote Share this post Link to post Share on other sites
euroriffic 609 Report post Posted September 28, 2014 Yea do look abit like some 100spokes for the old impala, hopefully will look good on something I own! And yes, do have some 40s, need a good rebuild tho 1 Quote Share this post Link to post Share on other sites
Ahmedsinc 414 Report post Posted September 28, 2014 Gah, life can be so unfair sometimes! Keen to see what you do with them, they're looking pretty sad in their current state Quote Share this post Link to post Share on other sites
euroriffic 609 Report post Posted September 28, 2014 Yea unsure yet, will wait and see Quote Share this post Link to post Share on other sites
m3Dakar 5 Report post Posted October 19, 2014 be a pretty tight squeeze on a e36?? would look sick Quote Share this post Link to post Share on other sites
