pink_e34 0 Report post Posted November 13, 2005 Hi all, Im pink_e34'w bf. (I think I did join up here at somestage but I forgot my name and password! ) I need some help: I know e32 34 and 38 have the same offset and stud measure ments (http://www.carlsalter.com/wheel_fitments.html) I've been told many of the larger holdens have compatible wheels. Is this the case? Id much appreciate it if someone could give me some suggestions for good (but inexpensive) 17" wheels for my e32. Quote Share this post Link to post Share on other sites
bmwsparkle 3 Report post Posted November 13, 2005 e28, e34, e32, e24, e23, e38 all share same stud pattern and im pretty sure offset is the same, the offset on my E28 is et20 as far as I can remember, basically anything that fits holdens should fit... i think.. i am unsure on wat the holden offset is, I would like to know this too if you find out, as I mite be grabbin some holden steelies for track wheels Quote Share this post Link to post Share on other sites
kiwi535 538 Report post Posted November 13, 2005 (edited) 120mm 5 stud pcd,20 mm offset 72.5 hub dia,AFAIK ALL 5 and 7 series are interchangeable EXCEPT e 39 which has 74.1mm hub dia.Most aftermarket wheels will require a hubcentric(and the aforementioned E39) ring to space the wheel hub down to suit the e32 or e 34 hub,here is some info e34 wheel info just did a quick web search,found a commodore forum apparently commodore offset is 45 or so Edited November 16, 2005 by kiwi535 Quote Share this post Link to post Share on other sites
E30-323ti 66 Report post Posted November 13, 2005 The newer Commodores (VT's VZ's etc...) are ~45offset so are not right for the 5&7'ers. Quote Share this post Link to post Share on other sites
