HaNs 226 Report post Posted February 3, 2016 (edited) Sold this car a year ago and purchased it back. Thought i better post it here Replaced driver and passenger's side door handle mechanisms Repaired drivers side power window regulator with new slides Repaired door cards Replaced rear vent window seals Replaced rear windscreen outer seals Installed H&R Cup Kit (matched shocks and springs) Installed ECS tuning rear strut tower reinforcement plates. Installed Msport chin spoiler front lip. Replaced water pump with new unit with metal impeller Replaced thermostat Replaced thermostat housing with aluminium unit Replaced upper and lower rad hoses Replaced radiator cap Replaced LCA bushings with purple powerflex. Replaced RTA bushings Installed poly RTAB limiters Fixed the PS fluid leaks & replaced fluid. Style 22s with near new Dunlop Direzza Z2 star specs (200 treadwear semi-slicks). Plan is 8 point cage, new rear diff and aftermarket LSD, racetech 4009 seats, new brake lines and fluid. Trying to keep to cheap OEM parts. Not out to win any series. Goal is club events and maybe a short targa. Edited February 3, 2016 by HaNs 1 Quote Share this post Link to post Share on other sites
HaNs 226 Report post Posted February 3, 2016 80km of track work and drove it home 1 Quote Share this post Link to post Share on other sites
HaNs 226 Report post Posted February 3, 2016 New lip Quote Share this post Link to post Share on other sites
HaNs 226 Report post Posted February 3, 2016 Weight loss Quote Share this post Link to post Share on other sites
HaNs 226 Report post Posted February 3, 2016 Loom labeling so i know what i can remove later Quote Share this post Link to post Share on other sites
HaNs 226 Report post Posted February 3, 2016 (edited) Test fitting a Racetech 4009HR seat Edited February 3, 2016 by HaNs 1 Quote Share this post Link to post Share on other sites
HaNs 226 Report post Posted February 3, 2016 Oh and a nice rear diffuser being made in Russia for me 4 Quote Share this post Link to post Share on other sites
5amchris 45 Report post Posted February 3, 2016 top job hans =) Quote Share this post Link to post Share on other sites
duvey 245 Report post Posted February 3, 2016 Great to see this getting thrashed about. Gone to a good home :') Quote Share this post Link to post Share on other sites
Danger 31 Report post Posted February 3, 2016 Nice car, where did you get the new front lip? Quote Share this post Link to post Share on other sites
HaNs 226 Report post Posted February 3, 2016 Great to see this getting thrashed about. Gone to a good home :') Moved back home haha When it's all ready come for a drive 1 Quote Share this post Link to post Share on other sites
HaNs 226 Report post Posted February 3, 2016 Nice car, where did you get the new front lip? eBay Quote Share this post Link to post Share on other sites
duvey 245 Report post Posted February 3, 2016 Moved back home haha When it's all ready come for a drive Sounds good! Keep us updated with your progress Quote Share this post Link to post Share on other sites
HaNs 226 Report post Posted February 4, 2016 (edited) Kill switch and remote pull thanks to Palmside Edited February 4, 2016 by HaNs Quote Share this post Link to post Share on other sites
Daniel0663 30 Report post Posted February 4, 2016 Very Nice. Is that Shim's diffuser? looks to be made a lot better than Mateo's version. Quote Share this post Link to post Share on other sites
HaNs 226 Report post Posted February 4, 2016 Very Nice. Is that Shim's diffuser? looks to be made a lot better than Mateo's version. Fancy Wide, new kids on the block by the looks of things Quote Share this post Link to post Share on other sites
Daniel0663 30 Report post Posted February 4, 2016 (edited) Yeah, that's Shim. Let us know what the quality/build is like, looks really well made compared to anything else on the e36 market. Edited February 4, 2016 by Daniel0663 Quote Share this post Link to post Share on other sites
HaNs 226 Report post Posted February 4, 2016 (edited) Yeah, that's Shim. Let us know what the quality/build is like, looks really well made compared to anything else on the e36 market. I want their front splitter but wont ship or sell me the template. Edited February 4, 2016 by HaNs Quote Share this post Link to post Share on other sites
Daniel0663 30 Report post Posted February 4, 2016 I will be willing to sell mine if you want, i would rather run a AC lip on my e36 at the moment so have no need for one. Are you familiar with Jeff's felony form e36? i made that front splitter design and would suit your needs perfectly. Shoot me a PM or add me on FB and we can discuss in detail. Quote Share this post Link to post Share on other sites
HaNs 226 Report post Posted February 10, 2016 Seats are made and should be here Friday, asked KBM to sort me some seat bases Kill switch installed, but have a cut at 2,000rpm in first gear only...odd issue. New plugs/oil filter and fuel filter arrived.thanks to Fabian at CJBMW Hamilton 3.64 ratio diff arrived thanks to Andy Quote Share this post Link to post Share on other sites
HaNs 226 Report post Posted February 12, 2016 Seat and other bits are here Quote Share this post Link to post Share on other sites
richard 384 Report post Posted February 12, 2016 what type of seats are you going use adjustable mounts or solid mounts Quote Share this post Link to post Share on other sites
HaNs 226 Report post Posted February 12, 2016 what type of seats are you going use adjustable mounts or solid mounts Racetech 4009, one wide and one normal. Going fixed for now. Quote Share this post Link to post Share on other sites
HaNs 226 Report post Posted February 21, 2016 Another 100km on track at Hampton downs today, best was a 1.24.5 lap Need to change fluid, pads, rotors and lines as brakes feel f**ked. Will get rid of aircon/looms/sunroof and tidy up driving and hoping for a 1.21 at least 3 Quote Share this post Link to post Share on other sites
Daniel0663 30 Report post Posted February 21, 2016 (edited) Good excuse to upgrade e46 330/328 brakes/race pads? 330 with e46 m3 rotors would be mint. Dion is running e46 m3 rotors with 330. Diffuser is looking real nice, notice much difference? Edited February 21, 2016 by Daniel0663 Quote Share this post Link to post Share on other sites