Jump to content
Sign in to follow this  
Jacko

BZ-Touring Corolla - SOLD

Recommended Posts

Very tidy factory BZ Touring. Definitely one of the nicer examples around, not a basket case of bad mods and hack jobs. Priced accordingly, just drive it.

230 something k on the clock. Drives great, 6 speed shifts smooth without crunchy synchros. Happy Black top 4AGE, drinks the usual amount of oil and only fed 98 in my ownership.

Average 8.3km/l on my drive, and makes the magic 100+ hp/litre. Practical, but good fun car to drive, handles really well for a FWD, close ratio gearbox and an engine that is happiest at 7k rpm :D 

Selling as I bought it for commuting Akl-Raglan daily, and its no longer needed ( cant justify 3 cars ). The last 40,000km are pretty much all on the open road.

In the past 20k -

New clutch kit
New rotors and pads. Brake fluid flushed
Gear box flushed
Coolant flushed
New plugs and leads.

In the past 5k -
New KYB shocks and cobra springs
New cambelt, idler, water pump
Every. Single. Oil. Seal. No leaks! 
Thermostat and switch.

Will come on new Neuton NT5000 tyres on the front, near new on the back. 17" ROH blades, need a refurb if can be bothered.

New Sony digital media headunit, Rockford fosgate/JVC 6" components, Kenwood undeseat subwoofer. Sounds good. Decent Uniden Alarm.

Replacement headlights have been ordered, factory ones are starting to craze. Drivers window regulator safety switch is bit keen, it occasionally triggers early, otherwise its a good un.

Interior and upholstery have just been cleaned. Cut/polish/wax and its pretty shiney

No mad rush to sell, will go on tardme in a few weeks.

 

$4500 ono

37349436_10155309041517693_250075415702405120_o.jpg

37268344_10155309041187693_7932256867122675712_o.jpg

37354448_10155309040972693_592938209650933760_o.jpg

37335627_10155309040202693_1393291943487733760_o.jpg

37274212_10155307547607693_3082860343190355968_o.jpg

Edited by Jacko

Share this post


Link to post
Share on other sites

Pointy end... just think of it half an S65, that doesnt eat bearings: ITBs, 11:1 compression ratio, 5 valves per cylinder and vanos ? 

20180720_145528_HDR.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...