danutt 4 Report post Posted June 8, 2006 camshaft worn gonna replace with a race one any ideas or suggestions?? thoughts on cams etc and performance gains and experience with them also if someone knows a link or company that is a supplier of cams for a e30 318i thanx :mosh: Quote Share this post Link to post Share on other sites
danutt 4 Report post Posted June 8, 2006 maybe kelford makes cams for da bimmer???? also can i once the cam shaft is out have it machined or modified similar to a mild race cam ??? if so who does this?? thanx Quote Share this post Link to post Share on other sites
Guest Andrew Report post Posted June 8, 2006 have you looked at the cam yet - or are you assuming it's worn because of advice on this forum. Your probably sounded more to me like a gearbox issue. Quote Share this post Link to post Share on other sites
danutt 4 Report post Posted June 8, 2006 had it looked at by a euro specialist and thats wat he said its a wron camshaft car doesnt revv fine in neutral i was mistaken i revved it yesterday to make sure it revved fine and waas a gearbox problem but it started to get almost thrown off round 5000 an revv alot slower and that is where i have been experiencing the problem when in gear if you floor the car, theres a cable going to the gearbox which gets pulled, where does this leed too..kick down cable? i have a knocking in the rear when i turn to the right round corners and not when i turn left ive noticed thats my "burnout"wheel lol could be twisted sumthing?or??? thanx Quote Share this post Link to post Share on other sites
kerrynzl 3 Report post Posted June 23, 2006 Call Adrian at Franklin Cams [0800 CAMSHAFT] They build up worn cams ,and grind any profile you want.[this is better than grinding the cam too much and under cutting the base circle] The Cam followers will need resurfacing as well Quote Share this post Link to post Share on other sites
topless 13 Report post Posted June 23, 2006 if you floor the car, theres a cable going to the gearbox which gets pulled, where does this leed too..kick down cable?Yup...i have a knocking in the rear when i turn to the right round corners and not when i turn left check your upper shock mounts in the boot. Might as well check the lower ones while you are about it... Didn't think burnouts in a 318 were possible..??? Quote Share this post Link to post Share on other sites
danutt 4 Report post Posted June 25, 2006 if you couldnt get a 318 to do a burnout den you cant do em right car all good now got new tyres camshaft goin in in august wen i get back from the snow and i will post pics etc then by the way i have been dealing with adrian from franklin cams very helpful indeed thanx :mosh: Quote Share this post Link to post Share on other sites
danutt 4 Report post Posted June 25, 2006 and sorted knocking turned out to be wat i expected a loose or worn exhaust rubber so got dat replaced no knocking glad i dont havta replace shocks or other goods dat were going thru my mind wen i heard da knocking Quote Share this post Link to post Share on other sites
E30stz 0 Report post Posted June 25, 2006 (edited) if you couldnt get a 318 to do a burnout den you cant do em right lololol ummmm... 'you cant do em right' ... how many auto gearboxes have you been throguh doing them right lol .. and I'm sure the people that dont do them right, have a further $300-500 that they could spend on buying other performance car mods ie. racing stripes or alcohol. Edited June 25, 2006 by E30stz Quote Share this post Link to post Share on other sites
