damn custom sized bmw nuts and bolts

[rolls_on_19 0]

Hey guys. Was fiddling with my engine last week and failed to retighten some nuts back up.

Basically they vibrated loose and i can't get into bmw to even see if i can get replacements.

I assume i can.

They're 6.8mm thread size and hold together the top and bottom halves on my m42 intake manifold.

The nut is about 10-13mm i think but it's not really inmportant.

If anyone can help i'd be grateful.

If anyone has any to sell i'll take 2. Can be texted on 0276358350 as i have poor internet access atm.

Thanks

[hybrid 1039]

No. Description Supplement Qty From Up To Part Number Price Notes

01 INTAKE MANIFOLD LOWER PART 1 09/1993 11611734535 $691.92 +core

02 STUD BOLT M7X40 2 09/1993 07129908121 $0.89

03 HEX BOLT WITH WASHER M7X100-Z1 1 09/1993 07119901683 $0.92

04 DOWEL D=9,5MM 2 09/1993 11121713264 $2.01

05 STUD BOLT M6X25-ZN 2 09/1993 07129908100 $0.17

06 STUD BOLT M7X30 2 09/1993 07129908125

07 VACUMM BOX 1 09/1993 11611734472 $48.83

08 FILLISTER HEAD SCREW M5X12 2 09/1993 07119906816 $0.17

09 INTAKE MANIFOLD UPPER PART 1 09/1993 11611734254 $213.16

10 STUD BOLT M6X40 4 09/1993 07129908104 $0.39

11 GASKET ASBESTOS FREE 1 09/1993 11611734490 $2.67

12 GASKET ASBESTOS FREE 1 09/1993 11611734684 $9.04

13 HEX NUT WITH PLATE AM7 5 09/1993 07129902630

14 SUPPORT 1 09/1993 11611734227 $10.27

15 HEX BOLT WITH WASHER M8X25-Z3 4 09/1993 07119915082 $0.50

16 SHACKLE 1 09/1993 11611734361 $5.13

17 HEX BOLT WITH WASHER M8X22-Z1 2 09/1993 07119915164 $0.50

18 HEX NUT WITH PLATE BM7 1 09/1993 07129946307 $0.50

19 SUPPORT 1 09/1993 11611247643 $4.52

20 HEX NUT WITH PLATE AM7 4 09/1993 07129902630

21 HEX BOLT WITH WASHER M7X16-Z2 1 09/1993 07119900509 $0.28

22 HEX NUT WITH PLATE AM7 2 09/1993 07129902630

23 O-RING 65X1,8 1 09/1993 11611734225 $3.27

Just phone up Jerry claytons parts division ... ask for keith .. they will be cheap as brand new .. like $4 or $5 and they will probbaly have em in stock ... or a 1 day wait for them to get em from BMW NZ. Theyll be a universal bolt used across many models.

sorted

[rolls_on_19 0]

that's the gravy.

Thanks man

[rolls_on_19 0]

na man. My haynes manual says they're 6.8mm thread.

i spent about half an hour with my local holden mechanic and a couple boxes of metric,udf,udc nuts and nothing fitted