Murrayc

Hi, I'm after a set of M20 2.0 ltr (130mm) Conrods. Cheers, Murray

Does anyone have a rear subframe bush tool for loan?

Can anyone suggest a good high performance M20 rocker arm thats good for 7000 RPM?

Can anyone provide instructions on removing the rear quarter window in an e30 coupe. It the fixed type, not hinged. Cheers

Can anyone recommend a company in Wellington that specialises in E30 diffs. Cheers.

Try this link. http://www.msportster.co.uk

Wanted - used cylinder head for rebuild.

Prefacelift 325i M20 inlet manifold wanted in Wellington.

Chaps, Sorry for the confusion. It's the rear trailing arm tabs. I have sorted out with welding some reinforment to the tabs. Cheers

I have installed uprated sway bars and the factory mounts on the control arm can't take the extra load and are bending. Has anyone reinforced their's. How was it done. Cheers.

I'm about to order a set of BTM race headers as soon as I can get someone else inteterested in buying another set. Cost of one set is 700 pounds vesus 400 pounds if 2 set ordered, plus savings in freight. I can get 2 sets landed in Wellington for $1,600 NZD including duty & GST.

Try Bell Motorsport in OZ. He has a few body parts for e30s.

Brendan, I've been considering a Shrick but will probably go for a CAT cam from Quality Engineering in the UK. They gave me a quote a few months ago for a 283 degree for 188 Pounds. Let me know if your interested as there could be a savings on freight for more than two. I'm also looking at a set of BTM stainless race headers that would complement this cam. If I buy more that one set I can get delivered to Wellington for around $1,600. including GST and Duty. Check out their web site for dyno results etc. Cheers, Murray

Just had BTM confirm freight costs for 2 sets of headers of 210 pounds delivered to Wellington. Result means that for 2- 5 sets they will cost approx $1,650 NZD each including 10% duty and 12.5 % GST for over 6 sets price each approx 1,472 NZD each. Let me know who's keen. Cheers, Murray

I'll drop them a line on Monday to check.

Have just got a price list confirmed from BTB. Stainless Steel 6-2 manifold 1 off: 752 pounds 2 - 5: 430 pounds (note hugh discount when ordering more than one set) 6 - 9: 376. Stainless Down pipe 2-1 1 off: 288 pounds 2 - 5: 164 pounds 6 - 9: 144 pounds They are also looking a cost effective freight package Given the current exchange rate, makes them look OK cost wise, depending on freight. Estimated at about 300 pounds for 2 sets. Let me know if your keen and I'll can make multiple orders. I'm in Weelington so you'll need to factor in freight around NZ. Cheers, Murray 0274 488 533

Is any one keen on a performance exhaust manifold for their e30 325i from BTB exhausts in the UK. They have offered a discount if more than one set ordered as need to manufacture to order (8-10 weeks). They're not cheap at $750 pounds less 17.5% VAT, plud freight (plus further discount if more than one), but are the business as have been developed on their test bed over a few years. http://www.racecar.co.uk/bmwexhausts/ Cheers, Murray 0274 488 533

Get them to drop off at Daily Freight in Seaview. You can collect at the Auckalnd depot. Shouldn't cost much more than a tank of gas.

Thanks for that info. Thought it was a bit of a major. I'm also doing trailing arm bushes, diff, and a set of IE sway bars. Hopefully give me some added performance around the track. Any suggestiosn on how to remove the old sub frame bushes. I understand one method is to melt them out, or would a good press do the job.

Has anyoneone attempted replacing the rear sub frame bushes that can offer advice.

Has anyone altered their e30 accelerator pedal from the std floor mounted hinge arrangement for adjustablity for racing. I'm finding with my race seat mounted as low as possible the base of the pedal could go fwd a few centremetres and less fwd angle on the pedal.

Have you sold?

James, Got your message but not sure if got my response. Do you have a price in mind.

Thanks for that. I'll have a look on eBay. I was also looking at bringing a few bits back later in the year also (headers, camshaft, etc) so would be keen to share in a bulk freight deal. Murray 04 472 7087 0274 455 533

Steve, Whats happening to that camshaft??