Ogg

How much for a 6 cyl cluster shipped to auckland?

5x120 15 inch Two tyres are Nexen Radial N2000 205/60/15 The other two are Braura Barum 205/60/15 all tyres have aprox 8mm of thread. May fit other 5 stud vehicles vehicles . 300$ ONO

Can i see a pic of the "huge 'cusco' 2 tier rear spoiler " ?

How much for the front Kit(lip) ?

The trade me ad says "sex on wheels" so... what exactly are you selling here?

HY GUYS, I really appreciate the help I've been given on this board and now i come back with yet another problem... I have a 85' 325 e30 and i recently noticed that my water temperature gauge had stopped working .Just the water temp .Everything else works great . On the engine side it all looks pretty tidy but under the dash things look a little hectic. I've been told it might be the batteries or maybe a fuse ... Any idea where i should start? Cheers

Hi guys, I have an e30 and it appeared as if the driver side outer ball joint needed a replacement. I bought the part and then the trouble started... I built a homemade press : didn't work . Tried the hammer :didn't work. Tried both at the same time :didn't work. Now the car is at home in the garage with no real prospect of ever getting out . Any advice or help would be much appreciated. Thank You

The thing is the fluid level is good. I was kind of used to this type of noise when turning sometimes, but now it's on all the time, the car sounds like an airplane. I'm just worried that this sound predicts catastrophic failure. Any other thoughts?

Hy Guys, I desperately need some advice. I own a 94' 318is coupe and after taking a look at my power steering fluid i was almost shocked .It was black as tar and smelled even worse. Ever since i bought the car i had a feeling the steering is a bit heavy so i decided to change the fluid. So what i did was jack up the car, pot a pan underneath and undo the bolt that connects one of the hoses to the pump. i let it drain completely then i had someone turn the steering wheel from lock to lock so that the steering box would empty completely. After this i put everything back in place and filled the power steering reservoir with Dextron lll ATF . I turned the wheel again from lock to lock a few times to let any air bubbles out of the system. PROBLEM: As soon as i started the car i noticed a pretty loud whine coming from the power steering pump(the car sounds like it's supercharged). Actually the whine is louder then the engine noise. I tried again to turn the wheel from lock to lock with the power steering fluid tank cap off and i notice the steering is much much better then before(lighter), but that did not solve the noise. Since then i drove the for at least 30km and it feels great but the loud whine scares the crap out of me. PLEASE HELP ! MUCH APPRECIATED>

I have a 318is and seem to have the same problem. First i cleaned the Idle Control Valve because it was idleing a bit rough and after that all hell broke loose. The idle is now at 1000-1200 RPM and I'm driving it with the idle control valve disconected because if I plug it in the engine stalls after I rev it . The funny thing is when i first start it it idleing at a regular 700-800 RPM, even if the engine is already hot, but as soon as minute passes or i rev it it just sticks to it's super anoyng 1000-1200 RPM at idle. Can anyone PLEASSSSSE HELP?