-
Content Count
138 -
Joined
-
Last visited
Posts posted by albert72
-
-
Wow, looks great!
-
Gave the starter motor a light tap with a hammer and viola, damn thing started. I guess brushes maybe shot. So the hammer is a main stay in my boot for the meantime till I sort out the starter motor
-
Manual doesn't, auto does, but to be honest - have never needed to find it though. It will be one of the relays behind the glovebox. Not under the bonnet.
Thanks. At this stage I'm hoping it's just the relay otherwise time to look for a starter motor
-
Anyone out there who can quickly point out where the starter relay is for an M20 E30? I found two relays on the side of the airbox, one blue and one white relay
-
-
Bottom part of my front guards are now showing some rust (near the front doors). Paint condition on the guards are still mint. Is it advisable and practical just to have the rusted part repaired or change the guards and have them painted?
-
bump.
or y'all not keen now?
Count me in. DBZ586 , Blue Silver Fern and 2x Blank Plate Frame. Transferring payment of $90 tomorrow
-
It looks really good! Where do you get that stuff from? Like repco or something?
Got it from repco. Used up 5 cans. Might be less if you're dyeing it black
-
Upload to www.imgur.com or www.tinypic.com then link
thanks!
-
Oh true!! Could you upload a pic bro would be interesting to see! Wouldnt mind dying over the black ones because fade wouldnt be that noticeable. Was going to do it to the blue ones a while ago but was worried it wouldnt work!
-
So i have decided to keep racks,
but il take them off car just chuck them in wardrobe and put on maybe for a show and shine,
Since ive ordered a Thule wind fairing off ebay.
I got the black leather recaros on friday and put them in,
The blue ones are for sale for $500, the condition of the blue ones was so much better but i prefer the look of black leather,
Which i will be redying amd covering at some stage.
If the blue leather doesnt sell by end of next month i will put it into my 320i
I recieved my cambelt/tensioner and waterpump/gasket
Which i will get put in along with my 5 speed conversion next month ( or the next /: )
And i am getting a price for a 2.8 stroker after that.
Rims are getting painted later in year
Need to get some 10mm 4x100 hubcentric spacers
Which im probably getting off ebay for $60
Not much else happening so possibly ordering the h&r springs next week or the next.
(Have the money just dont wana spend another $700 after paying $700 for the leather)
Keep ya posted,
Keen to hear your guys opinions etc
Ive actually dyed my blue leather recaros to dark gray about 3 months ago. I use VHT vinyl dye then applied some leather conditoner a couple of days later. it turned out pretty good So far no fading
-
Probably want to make sure they're insured for shipping too for the money.
FYI, these use to go for $999 at mag and tire direct when they came out. Keep in mind with rep wheels, they are pretty heavy as they use low grade cast alloy construction and don't do performance or fuel economy any favours.
Mag and tyre still sells them at $799 if im not mistaken. decent looking reps, actually bought a set of 15x8 earlier this year. But they only do 15 inch, was really after 16's.
Good point on the insurance btw
-
Sounds good mate, was it a brand new one? How much did it set you back? I took the radiator sensor out and one of the thermostat ones... (Most definitely should have got both out) and cleaned all the clumped up cooling fluid off it then flushed my cooling system... Interesting thing was the car idled at a nice level pace with a lot less play than usual.. Could be going down your road a bit there. This problem could be a myriad of small things. The main issue is still taking that gas pedal of after revving the car and it struggling to get back to idling.
Around $25, there's the bosch and tridon brand. Went for the bosch ones. Funny thing is, idling is now all good but car now tends to hard start when engine is warm or after long drive. Might be the coil going bad or something else
-
That is a good idea, the only one in the hawkes bay region is Jeff Gray and i can't afford to spend a bomb on them. Also i know i am very close and have already spent so much time trying to fix this... that said it may be more beneficial to have money well spent on a technician who won't waste my time.
yes I didn't find anything much untoward apart from a bit of oily/moisture around the connecter plug which i dried and cleaned off... When the car fired up today it happily went to 5k rpm and beyond. does that mean i could rule out a spark problem and fuel delivery issue?
I'll continue trying to clean things up this weekend. I did pull that temperature sensor in the thermostat housing out and it was pretty globby and horrible in it. Residue from the coolant was all over it. i don't have a multimeter handy so that was more of a reason to send it off to the sparky.
Just replaced the temperature sensor (blue plug) this morning, resistance of the old one was way off. idle is now smooth at 600 rpm. Hopefully car will consume less petrol now since previous idle was between 700-800rpm
-
So landed cost for a set of 16x8 (at US$195 each) would be around $1360. That's $1030 wheels + $120 freight + $210 duty/taxes (http://www.whatsmyduty.org.nz/).
Did I miss any other charges/fees?
-
Kiwishipping $104NZD.. + GST etc.
Sounds good. Any idea on the lead time and taxes?
-
You can buy the ESM's from ESM directly for half that.
How much freight do you reckon it will cost?
-
Still looking for an MTECH 2 steering wheel.
-
I've been looking for BBS RS wheels for my e30, but am struggling to find authentic ones at a reasonable price. So I've decided I might just get some well done replicas. Does anyone know a place in NZ that sell BBS RS reps in about a 16 or 17 inch?
Check out these listings
http://www.trademe.co.nz/motors/car-parts-...n-607660689.htm
http://www.trademe.co.nz/motors/car-parts-...n-607659193.htm
I just think they are bit pricey though, considering they are reps. I would personally choose ESM if I have the money to spare
-
Welcome!
-
give me options please
Are you keen on a prefacelift? Just saw one in panorama road, mt. Wellington earlier today.owned by a couple who sells bmw parts on trademe
-
-
Does anyone know a good source of bosch injectors? Thanks
For which vehicle, might be able to help sourcing them
-
Tom e34 relays are totally different.
Tried several relays but still didn't fix the problem. Guess it's time to take out the motor tomorrow
BMW PARTS ONLINE
in TradeMe discussions
Posted · Edited by Tom325 · Report reply
Anyone ever dealt with BMW Parts Online (Ladies Miles Motors Co. Ltd) in Ellerslie?